Articles liés à Encapsulation Technologies for Electronic Applications

Encapsulation Technologies for Electronic Applications - Couverture rigide

 
9780815515760: Encapsulation Technologies for Electronic Applications

Synopsis

Electronics are used in a wide range of applications including computing, communication, biomedical, automotive, military and aerospace. They must operate in varying temperature and humidity environments including indoor controlled conditions and outdoor climate changes. Moisture, ionic contamination, heat, radiation and mechanical stresses are all highly detrimental to electronic devices and can lead to device failures. Therefore, it is essential that the electronic devices be packaged for protection from their intended environments, as well as to provide handling, assembly, electrical and thermal considerations.

Currently, more than 99% of microelectronic devices are plastic encapsulated. Improvements in encapsulant materials, and cost incentives have stretched the application boundaries for plastic electronic packages. Many electronic applications that traditionally used hermetic packages such as military are now using commercial-off-the-shelf (COTS) plastic packages. Plastic encapsulation has the advantages of low cost, smaller form factors, and improved manufacturability.

With recent trends in environmental awareness, new environmentally friendly or ' green' encapsulant materials (i.e. without brominated additives) have emerged. Plastic packages are also being considered for use in extreme high and low temperature electronics. 3-D packaging and wafer-level-packaging (WLP) require unique encapsulation techniques. Encapsulant materials are also being developed for micro-electro-mechanical systems (MEMS), bio-MEMS, bio-electronics, and organic light-emitting diodes (O-LEDs).

This book offers a comprehensive discussion of encapsulants in electronic applications. The main emphasis is on the encapsulation of microelectronic devices; however, the encapsulation of connectors and transformers is also addressed. This book discusses 2-D and 3-D packaging and encapsulation, encapsulation materials including environmentally friendly 'green' encapsulants, and the properties and characterization of encapsulants. Furthermore, this book provides an extensive discussion on defects and failures related to encapsulation, how to analyze such defects and failures, and how to apply quality assurance and qualification process for encapsulated packages. This book also provides information on the trends and challenges of encapsulation and microelectronic packages including application of nanotechnology.

Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.

À propos des auteurs

Dr. Haleh Ardebili has a BS honors degree in Engineering Science and Mechanics from Pennsylvania State University at University Park, MS degree in Mechanical Engineering from Johns Hopkins University and PhD degree in Mechanical Engineering from University of Maryland at College Park. She has three years of industry experience as research scientist at General Electric Global Research Center at Niskayuna, New York. She is a recipient of GE Invention Fulcrum of Progress Award. She has several years of experience teaching engineering courses at University of Houston. In Sep 2010, she joined as Assistant Professor in the Mechanical Engineering Department at University of Houston. Her research work is mainly focused on nanomaterials for Energy Storage and Electronics.

He is the founder and director of CALCE (Center for Advanced Life Cycle Engineering) at the University of Maryland, which is funded by over 150 of the world's leading electronics companies at more than US$6M/year. He is a Professional Engineer, an IEEE Fellow, an ASME Fellow, an SAE Fellow, and an IMAPS Fellow. He is currently serving as editor-in-chief of Circuit World. He served as editor-in-chief of IEEE Access for 6 years, as editor-in-chief of IEEE Transactions on Reliability for 9 years, and as editor-in-chief of Microelectronics Reliability for 16 years. He has also served on three U.S. National Academy of Science studies, two U.S. Congressional investigations in automotive safety, and as an expert to the U.S. FDA. He is also a Chair Professor. He consults for 22 major international electronics companies, providing expertise in strategic planning, design, test, prognostics, IP and risk assessment of electronic products and systems.

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

  • ÉditeurWilliam Andrew Publishing
  • Date d'édition2009
  • ISBN 10 0815515766
  • ISBN 13 9780815515760
  • ReliureRelié
  • Langueanglais
  • Nombre de pages504
  • Coordonnées du fabricantnon disponible

Acheter neuf

Afficher cet article
EUR 172,92

Autre devise

EUR 11,31 expédition depuis Royaume-Uni vers France

Destinations, frais et délais

Autres éditions populaires du même titre

9780323165495: Encapsulation Technologies for Electronic Applications

Edition présentée

ISBN 10 :  0323165494 ISBN 13 :  9780323165495
Editeur : William Andrew, 2013
Couverture souple

Résultats de recherche pour Encapsulation Technologies for Electronic Applications

Image d'archives

Haleh Ardebili,Michael G. Pecht
Edité par William Andrew 2009-07-22, 2009
ISBN 10 : 0815515766 ISBN 13 : 9780815515760
Neuf Couverture rigide

Vendeur : Chiron Media, Wallingford, Royaume-Uni

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Hardcover. Etat : New. N° de réf. du vendeur 6666-ELS-9780815515760

Contacter le vendeur

Acheter neuf

EUR 172,92
Autre devise
Frais de port : EUR 11,31
De Royaume-Uni vers France
Destinations, frais et délais

Quantité disponible : Plus de 20 disponibles

Ajouter au panier

Image fournie par le vendeur

Haleh Ardebili
Edité par Elsevier Science Jun 2009, 2009
ISBN 10 : 0815515766 ISBN 13 : 9780815515760
Neuf Couverture rigide
impression à la demande

Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Buch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Electronics are used in a wide range of applications including computing, communication, biomedical, automotive, military and aerospace. They must operate in varying temperature and humidity environments including indoor controlled conditions and outdoor climate changes. Moisture, ionic contamination, heat, radiation and mechanical stresses are all highly detrimental to electronic devices and can lead to device failures. Therefore, it is essential that the electronic devices be packaged for protection from their intended environments, as well as to provide handling, assembly, electrical and thermal considerations. Currently, more than 99% of microelectronic devices are plastic encapsulated. Improvements in encapsulant materials, and cost incentives have stretched the application boundaries for plastic electronic packages. Many electronic applications that traditionally used hermetic packages such as military are now using commercial-off-the-shelf (COTS) plastic packages. Plastic encapsulation has the advantages of low cost, smaller form factors, and improved manufacturability. With recent trends in environmental awareness, new environmentally friendly or ' green' encapsulant materials (i.e. without brominated additives) have emerged. Plastic packages are also being considered for use in extreme high and low temperature electronics. 3-D packaging and wafer-level-packaging (WLP) require unique encapsulation techniques. Encapsulant materials are also being developed for micro-electro-mechanical systems (MEMS), bio-MEMS, bio-electronics, and organic light-emitting diodes (O-LEDs). This book offers a comprehensive discussion of encapsulants in electronic applications. The main emphasis is on the encapsulation of microelectronic devices; however, the encapsulation of connectors and transformers is also addressed. This book discusses 2-D and 3-D packaging and encapsulation, encapsulation materials including environmentally friendly 'green' encapsulants, and the properties and characterization of encapsulants. Furthermore, this book provides an extensive discussion on defects and failures related to encapsulation, how to analyze such defects and failures, and how to apply quality assurance and qualification process for encapsulated packages. This book also provides information on the trends and challenges of encapsulation and microelectronic packages including application of nanotechnology. 504 pp. Englisch. N° de réf. du vendeur 9780815515760

Contacter le vendeur

Acheter neuf

EUR 175
Autre devise
Frais de port : EUR 11
De Allemagne vers France
Destinations, frais et délais

Quantité disponible : 2 disponible(s)

Ajouter au panier

Image fournie par le vendeur

Haleh Ardebili
Edité par Elsevier Science, 2009
ISBN 10 : 0815515766 ISBN 13 : 9780815515760
Neuf Couverture rigide
impression à la demande

Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Buch. Etat : Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Electronics are used in a wide range of applications including computing, communication, biomedical, automotive, military and aerospace. They must operate in varying temperature and humidity environments including indoor controlled conditions and outdoor climate changes. Moisture, ionic contamination, heat, radiation and mechanical stresses are all highly detrimental to electronic devices and can lead to device failures. Therefore, it is essential that the electronic devices be packaged for protection from their intended environments, as well as to provide handling, assembly, electrical and thermal considerations. Currently, more than 99% of microelectronic devices are plastic encapsulated. Improvements in encapsulant materials, and cost incentives have stretched the application boundaries for plastic electronic packages. Many electronic applications that traditionally used hermetic packages such as military are now using commercial-off-the-shelf (COTS) plastic packages. Plastic encapsulation has the advantages of low cost, smaller form factors, and improved manufacturability. With recent trends in environmental awareness, new environmentally friendly or ' green' encapsulant materials (i.e. without brominated additives) have emerged. Plastic packages are also being considered for use in extreme high and low temperature electronics. 3-D packaging and wafer-level-packaging (WLP) require unique encapsulation techniques. Encapsulant materials are also being developed for micro-electro-mechanical systems (MEMS), bio-MEMS, bio-electronics, and organic light-emitting diodes (O-LEDs). This book offers a comprehensive discussion of encapsulants in electronic applications. The main emphasis is on the encapsulation of microelectronic devices; however, the encapsulation of connectors and transformers is also addressed. This book discusses 2-D and 3-D packaging and encapsulation, encapsulation materials including environmentally friendly 'green' encapsulants, and the properties and characterization of encapsulants. Furthermore, this book provides an extensive discussion on defects and failures related to encapsulation, how to analyze such defects and failures, and how to apply quality assurance and qualification process for encapsulated packages. This book also provides information on the trends and challenges of encapsulation and microelectronic packages including application of nanotechnology. N° de réf. du vendeur 9780815515760

Contacter le vendeur

Acheter neuf

EUR 190,41
Autre devise
Frais de port : EUR 10,99
De Allemagne vers France
Destinations, frais et délais

Quantité disponible : 2 disponible(s)

Ajouter au panier

Image d'archives

Pecht Michael Ardebili Haleh
Edité par William Andrew Publishing, 2009
ISBN 10 : 0815515766 ISBN 13 : 9780815515760
Neuf Couverture rigide

Vendeur : Majestic Books, Hounslow, Royaume-Uni

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : New. pp. 504. N° de réf. du vendeur 7933649

Contacter le vendeur

Acheter neuf

EUR 191,11
Autre devise
Frais de port : EUR 10,55
De Royaume-Uni vers France
Destinations, frais et délais

Quantité disponible : 3 disponible(s)

Ajouter au panier

Image d'archives

Ardebili, Haleh/ Pecht, Michael G.
Edité par William Andrew Pub, 2009
ISBN 10 : 0815515766 ISBN 13 : 9780815515760
Neuf Couverture rigide

Vendeur : Revaluation Books, Exeter, Royaume-Uni

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Hardcover. Etat : Brand New. 1st edition. 504 pages. 9.25x6.25x1.25 inches. In Stock. N° de réf. du vendeur __0815515766

Contacter le vendeur

Acheter neuf

EUR 195,10
Autre devise
Frais de port : EUR 11,92
De Royaume-Uni vers France
Destinations, frais et délais

Quantité disponible : 2 disponible(s)

Ajouter au panier

Image d'archives

Michael Pecht Haleh Ardebili
Edité par William Andrew Publishing, 2009
ISBN 10 : 0815515766 ISBN 13 : 9780815515760
Neuf Couverture rigide

Vendeur : Books Puddle, New York, NY, Etats-Unis

Évaluation du vendeur 4 sur 5 étoiles Evaluation 4 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : New. pp. 504. N° de réf. du vendeur 26962830

Contacter le vendeur

Acheter neuf

EUR 207,40
Autre devise
Frais de port : EUR 7,94
De Etats-Unis vers France
Destinations, frais et délais

Quantité disponible : 3 disponible(s)

Ajouter au panier

Image d'archives

Pecht Michael Ardebili Haleh
Edité par William Andrew Publishing, 2009
ISBN 10 : 0815515766 ISBN 13 : 9780815515760
Neuf Couverture rigide

Vendeur : Biblios, Frankfurt am main, HESSE, Allemagne

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : New. pp. 504. N° de réf. du vendeur 18962820

Contacter le vendeur

Acheter neuf

EUR 216,12
Autre devise
Frais de port : EUR 7,95
De Allemagne vers France
Destinations, frais et délais

Quantité disponible : 3 disponible(s)

Ajouter au panier