An Introduction to Solidworks Flow Simulation 2014

Note moyenne 0
( 0 avis fournis par GoodReads )
 
9781585038596: An Introduction to Solidworks Flow Simulation 2014
Présentation de l'éditeur :

An Introduction to SolidWorks Flow Simulation 2014 takes you through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned.

The fourteen chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

Table of Contents

1. Introduction
2. Flat Plate Boundary Layer
3. Analysis of the Flow Past a Sphere and a Cylinder
4. Analysis of the Flow Past an Airfoil
5. Rayleigh-Bénard Convection and Taylor-Couette Flow
6. Pipe Flow
7. Flow Across a Tube Bank
8. Heat Exchanger
9. Ball Valve
10. Orifice Plate and Flow Nozzle
11. Thermal Boundary Layer
12. Free-Convection on a Vertical Plate and from a Horizontal Cylinder
13. Swirling Flow in a Closed Cylindrical Container
14. Flow Past a Model Rocket

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

Meilleurs résultats de recherche sur AbeBooks

1.

Matsson, John
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Quantité : 2
Vendeur
GreatBookPrices
(Columbia, MD, Etats-Unis)
Evaluation vendeur
[?]

Description du livre État : New. N° de réf. du libraire 21664854-n

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 50,43
Autre devise

Ajouter au panier

Frais de port : EUR 2,45
Vers Etats-Unis
Destinations, frais et délais

2.

Ph.D. John E. Matsson
Edité par Schroff Development Corp (2014)
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Paperback Quantité : 1
Vendeur
The Book Depository US
(London, Royaume-Uni)
Evaluation vendeur
[?]

Description du livre Schroff Development Corp, 2014. Paperback. État : New. 276 x 216 mm. Language: English . Brand New Book. An Introduction to SolidWorks Flow Simulation 2014 takes you through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow. N° de réf. du libraire AAS9781585038596

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 52,94
Autre devise

Ajouter au panier

Frais de port : Gratuit
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais

3.

Ph.D. John E. Matsson
Edité par Schroff Development Corp (2014)
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Paperback Quantité : 1
Vendeur
The Book Depository
(London, Royaume-Uni)
Evaluation vendeur
[?]

Description du livre Schroff Development Corp, 2014. Paperback. État : New. 276 x 216 mm. Language: English . Brand New Book. An Introduction to SolidWorks Flow Simulation 2014 takes you through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow. N° de réf. du libraire AAS9781585038596

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 59,27
Autre devise

Ajouter au panier

Frais de port : Gratuit
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais

4.

Matsson, John E., Ph.D.
Edité par Schroff Development Corp (2014)
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Couverture souple Quantité : 1
Vendeur
English-Book-Service Mannheim
(Mannheim, Allemagne)
Evaluation vendeur
[?]

Description du livre Schroff Development Corp, 2014. État : New. N° de réf. du libraire TH9781585038596

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 63,97
Autre devise

Ajouter au panier

Frais de port : EUR 6
De Allemagne vers Etats-Unis
Destinations, frais et délais

5.

Matsson, John E., Ph.D.
Edité par Schroff Development Corp
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Quantité : 1
Vendeur
Blackwell's
(Oxford, OX, Royaume-Uni)
Evaluation vendeur
[?]

Description du livre Schroff Development Corp. État : New. N° de réf. du libraire 9781585038596

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 69,07
Autre devise

Ajouter au panier

Frais de port : EUR 5,20
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais

6.

Matsson, John
Edité par Schroff Development Corp (2014)
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Perfect Paperback Quantité : 2
Vendeur
Revaluation Books
(Exeter, Royaume-Uni)
Evaluation vendeur
[?]

Description du livre Schroff Development Corp, 2014. Perfect Paperback. État : Brand New. 340 pages. 11.25x9.00x0.75 inches. In Stock. N° de réf. du libraire z-1585038598

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 76,80
Autre devise

Ajouter au panier

Frais de port : EUR 6,94
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais

7.

John Matsson; Ph.D.
Edité par SDC Publications (2014)
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Perfect Paperback Quantité : 1
Vendeur
Irish Booksellers
(Rumford, ME, Etats-Unis)
Evaluation vendeur
[?]

Description du livre SDC Publications, 2014. Perfect Paperback. État : New. book. N° de réf. du libraire 1585038598

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 87,02
Autre devise

Ajouter au panier

Frais de port : Gratuit
Vers Etats-Unis
Destinations, frais et délais

8.

John E. Matsson
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Paperback Quantité : 1
Vendeur
AussieBookSeller
(SILVERWATER, NSW, Australie)
Evaluation vendeur
[?]

Description du livre Paperback. État : New. 216mm x 279mm x. Paperback. An Introduction to SolidWorks Flow Simulation 2014 takes you through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the .Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability. 340 pages. N° de réf. du libraire 9781585038596

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 66,51
Autre devise

Ajouter au panier

Frais de port : EUR 26,03
De Australie vers Etats-Unis
Destinations, frais et délais

9.

Matsson, John E., Ph.D.
Edité par Schroff Development Corp (2014)
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Paperback Quantité : 1
Vendeur
Media Mall
(Fyshwick, ACT, Australie)
Evaluation vendeur
[?]

Description du livre Schroff Development Corp, 2014. Paperback. État : New. 22.86 x 28.58 cm. Our orders are sent from our warehouse locally or directly from our international distributors to allow us to offer you the best possible price and delivery time. Book. N° de réf. du libraire MM-21736961

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 89,32
Autre devise

Ajouter au panier

Frais de port : EUR 11,06
De Australie vers Etats-Unis
Destinations, frais et délais

10.

John Matsson, Ph.D.
Edité par SDC Publications (2014)
ISBN 10 : 1585038598 ISBN 13 : 9781585038596
Neuf(s) Perfect Paperback Quantité : 3
Vendeur
Murray Media
(North Miami Beach, FL, Etats-Unis)
Evaluation vendeur
[?]

Description du livre SDC Publications, 2014. Perfect Paperback. État : New. N° de réf. du libraire P111585038598

Plus d'informations sur ce vendeur | Poser une question au libraire

Acheter neuf
EUR 97,66
Autre devise

Ajouter au panier

Frais de port : EUR 2,78
Vers Etats-Unis
Destinations, frais et délais