Reinventing the Factory: Productivity Breakthroughts in Manufacturing Today

Note moyenne 3,33
( 6 avis fournis par Goodreads )
 
9781416577720: Reinventing the Factory: Productivity Breakthroughts in Manufacturing Today
Afficher les exemplaires de cette édition ISBN
 
 

Book by Harmon Roy L Peterson Leroy D

Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.

Extrait :

Chapter 1

Management Perspective: The Profit Motive

Productivity and international competition have become increasingly important issues for manufacturing firms here and abroad. With this in mind, the primary goal of this book is to demonstrate that any company, anyplace in the world, can achieve superior productivity technology. With even modest investment, the factory output of high-quality products per employee hour can be substantially increased. In fact, major advances can be achieved by the simple reorganization of people and equipment. For several years in the late 1970s, Andersen Consulting studied productivity problems when it served as a consultant to Yamaha Motor Co. in Iwata, Japan, and worked with Yamaha's customer, the Toyota Motor Co. One of the most important lessons Andersen learned from this relationship was how to set targets for improving productivity. Some of the more startling revelations of this endeavor were:

1. When management set unbelievably high targets, it expected improvements of 50 to 90 percent and more. Surprisingly, these high targets were almost always matched and surpassed.

2. Since management had no specific basis for establishing targets, entirely new manufacturing methods needed to be invented to achieve these objectives.

3. Little or no time was spent justifying the cost of the project. The full-time project teams responsible for designing and implementing changes were charged with the responsibility of inventing low-cost solutions that were expected to generate savings in 6 to 12 months or less. Infrequent exceptions were handled through normal capital investment procedures.

In countries other than Japan, executives have recently started to adopt the same ambitious targets, and they have had the satisfaction of knowing firsthand that potential for productivity gains is not restricted to any single global area. Equally important, they have learned that these gains do not require a complete change in either national character or company culture. These executives also know that the most important secrets to success are setting high goals, discarding old ways of working, and inventing new, simpler, and lower-cost methods. The setting of seemingly impossible goals thus becomes self-fulfilling prophecy, but not by any magical formula, as radical goals demand radical departures from accepted ways of operating. When enlisting and insisting on the committed and enthusiastic participation of every manager, supervisor, and employee in the drive to achieve performance beyond the levels of competitors, executive management performs its most important role.

MANAGEMENT GOAL SETTING

Today, manufacturers in every country are comparing themselves to the most productive companies in the world, and most conclude that they may be second- or third-rate at best. Usually, however, the measure of productivity used to reach that conclusion has little to do with how successfully the company can compete in the international arena. Several indicators of productivity are measurable; others, such as degree of factory automation, are not. None of the conventional measures -- (1) man-hours of direct labor per unit produced, (2) man-hours (or employees) on the entire payroll per unit produced, (3) product cost per unit produced, (4) degree of factory automation -- are valid for meaningfully evaluating the competitiveness of a company vis-à-vis a company in another part of the world. For example, in some countries, employee compensation and benefits are only a small fraction of what they are in other areas. As a result, the productivity of the factory, office, and executive work force can be lower and yet still place the company in a competitive position internationally. Even when labor costs are comparable, material and component purchases usually make up 60 percent or more of product cost. Thus, purchase prices usually have a greater impact on competitiveness than do payroll costs. Since different manufacturers have different degrees of vertical integration, the one that merely assembles a product has considerably lower payroll costs than the vertically integrated manufacturer that manufactures components and, as well, assembles the finished product. Therefore, total product cost, although less than a perfect gauge, is a more meaningful measure of international productivity. The customer deciding between competing products of equal value should select the product with the lowest delivered price rather than be concerned with the manufacturer's cost. In the same vein, degree of automation is a subjective, and frequently erroneous, criterion for evaluating competitiveness. Glamorous, high-technology automation is often viewed as modern and productive -- even if the automation should be eliminated, as in the case of material transportation and storage, or if the automation itself costs more than simpler, manual techniques, or low-technology alternatives.

As long as world trade remains unregulated and stiff international competition prevails, market price is the only practical measure of productivity for manufacturers of products with identical value. Even delivered price has only short-term transient value, since a price can increase or decrease as a result of changes in the value of currency. For example, rapid and sharp appreciation of the German mark and Japanese yen from 1985 to 1987 caused the prices of products produced in those nations to rise sharply in most other countries. In some parts of the world, and especially in the United States, it has been fashionable to chastise manufacturers for losing their competitive position or, in developing nations, for never having achieved one. It is time to realize that large numbers of companies, worldwide, are working diligently to surpass the world-class manufacturers of today, their goal being to become the superior manufacturers of tomorrow.

To get started in this race, some companies have viewed a competitive benchmark project as the first phase of a productivity improvement program. But while completing extensive and arduous competitive comparisons, they have delayed work on factory improvements. While it is important to understand as much as practical about the competition, it is a mistake to put off improvements, awaiting study results in order to set targets. For one reason, meaningful comparisons range from extremely difficult to impossible to make, and are based on factors such as the degree of vertical integration, degree of automation, and value of the local currency. And, above all, the main issue is not the competition's stance today or what it will be in the coming year, but how to determine how much a company can expect to improve.

As quickly as possible, executive management must set new style factory improvements in motion. It is management's responsibility to specify aggressive targets that will demand quantum leaps forward in the international race for manufacturing superiority. It is not difficult for management to determine what its goals should be, throughout the company, or in individual departments. Experienced managers can suggest improvement targets based on a fast factory tour, Japanese style, albeit with a more logical basis. However, it is less important how the goal is set, than how high it is set. To explain this concept further, the remainder of this chapter deals with achievements of Western companies that now stand as reasonable goals for most manufacturers.
ard

CHANGEOVER AND SETUP REDUCTION

One example of a management target is the reduction of the cost of machine changeover from producing one part (or product) to producing another. Based on studies of thousands of different types of machines around the world, experience on changeover reduction shows that the average cost reduction should be expected to be somewhere between 75 to 80 percent. Interestingly enough, after the first project team has designed and installed changes to achieve the initial major reduction, a second team (on a second project) has been able to reduce the remaining cost in the very same range -- 75 to 80 percent. Bringing new objectivity to the problem, the second team can see ways to further improve the changeover -- ways the first team failed to recognize in its close proximity to the process.

Reduction, and even elimination, of changeover costs is one of the most important techniques required to achieve superior productivity. Higher-than-necessary changeover costs have three serious drawbacks:

1. They demand long production runs, which make it impractical to respond rapidly to unexpected customer requirements. Thus, customers are forced to wait until the end of the long run, at a minimum, before their new demands can be satisfied.

2. Large production runs result in sizable amounts of inventory. Exhibit 1-1 illustrates the basic relationship between lot size and average inventory attributable to lot sizes. When a lot is completed, inventory peaks. But over time, inventory decreases until the lot size is depleted. Then, a new lot is completed. The average inventory attributable to lot size is, therefore, half of the lot quantity. If every item is produced once a month, the minimum possible inventory is one-half the month's supply. If every item can be produced every day, the resulting minimum inventory could be one-half day's supply.

3. Large inventories require plant and stores/warehouse space, people and equipment to transport, stock, retrieve, and distribute.

SPACE UTILIZATION

Almost without exception every factory is twice as large as it needs to be to produce as much as double its current output. This being the case, the smallest factories should be the best factories, as suggested in Exhibit 12. Paradoxically, the physical size of a building hardly dictates the success of a company. A very large plant can be one of the best or one of the worst, depending on how its space is utilized. Experienced professionals can easily scan a factory, recognize opportunities for improvement, and establish targets for better use of space. Typical targets should be:

Plantwide 50 percent

Machine process 50 percent

Assembly 80 percent

Stores/warehouse 50 percent

One important objective of improved space utilization is to reduce the required capital investment and depreciation expense for manufacturers that own their factories, or to reduce operating costs for those that rent space. Since lower-level management personnel are usually naive about the advantages of improved use of space, they often misconceive that improved space utilization means uncomfortable working areas for employees. But, in truth, working areas actually increase, as excessive inventory, conveyors or wide aisles, and wasted, unused space disappear. Also, these same managers often feel that if half the factory space is vacated, there are no savings since the space would just sit idle. Executive management, on the other hand, is often instantly able to envision dramatic savings associated with improved space utilization. For instance, it can see that:

1. Inventory, machines, etc., from other company plants and/or warehouses can be moved into the vacated space, and the other facilities can be sold or subleased.

2. New products or acquired product production can be moved into the vacated space.

3. With newly vacated space, existing plans for new factories and/or warehouses can be dropped.

4. Walls can be erected between the occupied and vacated space, and the vacant space can be sold or rented.

Vacated space can, by itself, be a source of major economic benefit. In most companies, however, improved utilization of space has many more important recurring productivity benefits. Processes designed to improve space utilization eliminate excess work-in-process inventory and the corresponding investment. Permanent reduction of inventory either reduces the carrying costs, or permits investment of the freed-up capital. In addition, smaller spaces minimize the unnecessary movement of staff -- including both indirect personnel such as material handlers, supervisors, equipment repair employees; and direct workers who waste time moving about in areas that are larger than necessary to perform production operations. Improved space utilization also has some theoretical, intangible benefits that produce major economic results. For example, it improves communication among workers themselves, and between employees and supervisors. As well, the following unexpected changes typically occur: improvement of 90 percent in the number of defects, and a 75 percent improvement in equipment downtime. However, these performance improvements cannot be calculated based only on such concrete factors as time and motion, since they result largely from improved communications and team esprit de corps; nevertheless, management should establish targets for such improvements, remembering that setting the target high, and demanding its achievement, are two of the most important factors in success.

INVENTORY REDUCTION

For most manufacturing companies, reduction of inventory investment and of the associated costs of capital (or alternative investment return) is one of the most important internal sources of improved profitability. Although it is easier and faster to reduce work-in-process inventory, the largest amount of inventory (and, therefore, the area for greatest improvement) is in purchased materials and components and in finished goods. Permanent reduction of the latter inventory depends primarily on the implementation and operation of new manufacturing assembly and machining processes. For example, reducing changeover costs and the attendant ability to produce small production runs are paramount to finished goods reduction. However, achieving a permanent reduction of both finished goods and purchased inventories normally requires more time and effort than reducing work-in-process inventory. This involves implementation of new assembly and machining facilities since the physical layout and the process of the new facility control these inventory levels. When there is no space for work-in-process inventory, it cannot exist.

Sales and marketing staffs, as well as chief executive officers, should be skeptical of the premise that inventories of finished goods can be reduced while customer service is maintained or improved. Most manufacturers should plan to reduce these inventories only after demonstrating that reduced changeover costs have made it practical to respond rapidly to new and changed customer requirements, and that frequent, smaller run sizes improve customer service by increasing the frequency of receipts of finished stock. Significant, permanent reduction of purchased material and component inventory depends foremost on the implementation of a vendor program for most high-dollar-value suppliers. The reasons for large inventories, all of which can be changed, are:

1. Costs of vendor changeover cause production of large lot sizes.

2. Vendors frequently make late deliveries due to the unnecessary time required to process the latest schedule information into production schedules.

3. Even when the most recent schedules are available to vendors, deliveries are late because a long run already in progress needs to be completed. It is impractical to interrupt a long run because of the penalty of increased changeover costs.

4. Vendors frequently deliver defective materials and components that must either be reworked in house or returned to vendors for repair or replacement.

All the root causes of large material inventories can be addressed by a vendor program focusing on specific manufacturing process improvements. These...

Présentation de l'éditeur :

The "factory of the future" is here. We have the technology and professional knowledge, say leading manufacturing consultants Roy Harmon and Leroy Peterson, to implement revolutionary concepts that many managers might regard as futuristic. In this path-breaking book, Harmon and Peterson move beyond theory to document more than a hundred real-life applications of productivity improvement -- from the focused factory and assembly process design to the plantwide plan -- gathered from Andersen Consulting, Arthur Andersen & Co.'s offices around the world.

The reorganization of existing plants into multiple "factories within a factory" is the single most important feature of productivity improvement, according to Harmon and Peterson. These smaller units known as subplants, are honed to the smallest practical size to ensure the highest level of productivity. Multiple subplants can be clustered to focus accountability and authority for production of product families into easily managed groups of processes. With hundreds of diagrams and using examples of companies that operate focused factories in dozens of countries, Harmon and Peterson detail both the physical and organizational changes required to make the focused factory a successful and profitable feature of a plant's modernization.

In addition to creating subplants and subplant clusters, Harmon and Peterson show how manufacturers can dramatically increase productivity by adopting a plantwide plan. In its most basic form, the plantwide plan is a layout of a single factory. It includes, to the extent practical, not only the ideal layout but also step-by-step strategies for movement of individual processes from their current locations in the factory to final target destinations. Harmon and Peterson explain how managers can use the plantwide plan to eliminate the common problem of compromising ideals too early to accommodate assumed constraints and turn an existing factory into a competitive factory of the future -- today.

Flexibility, creativity, and dynamic planning are key concepts for attaining superior manufacturing results. For plant modernization to be profitable, the organizational structure must keep pace. Achieving world class status is not enough. The new hallmark of excellence must be continuous improvement to maintain a superior position. The plans and suggestions outlined in Reinventing The Factory allow the entrepreneur the responsibility and authority to effect ongoing improvements and render processes adaptable to reflect additions or removals of product lines, changes in sales volume over time and modifications resulting from previous or concurrent improvements. Harmon and Peterson provide the valuable tools and methods necessary to attain such goals. They highlight the dynamic nature of progress itself and show how managers can overcome the most tenacious habit: the resistance to change.

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

EUR 15,22

Autre devise

Frais de port : Gratuit
De Royaume-Uni vers Etats-Unis

Destinations, frais et délais

Ajouter au panier

Autres éditions populaires du même titre

9780029138618: Reinventing the Factory: Productivity Breakthroughs in Manufacturing Today

Edition présentée

ISBN 10 : 0029138612 ISBN 13 : 9780029138618
Editeur : The Free Press, 1989
Couverture rigide

Meilleurs résultats de recherche sur AbeBooks

Image de l'éditeur

1.

Roy L. Harmon, Leroy D. Peterson
Edité par SIMON & SCHUSTER, United States (2007)
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Paperback Quantité disponible : 10
Vendeur
The Book Depository
(London, Royaume-Uni)
Evaluation vendeur

Description du livre SIMON & SCHUSTER, United States, 2007. Paperback. Etat : New. Language: English. Brand new Book. The "factory of the future" is here. We have the technology and professional knowledge, say leading manufacturing consultants Roy Harmon and Leroy Peterson, to implement revolutionary concepts that many managers might regard as futuristic. In this path-breaking book, Harmon and Peterson move beyond theory to document more than a hundred real-life applications of productivity improvement -- from the focused factory and assembly process design to the plantwide plan -- gathered from Andersen Consulting, Arthur Andersen & Co.'s offices around the world.The reorganization of existing plants into multiple "factories within a factory" is the single most important feature of productivity improvement, according to Harmon and Peterson. These smaller units known as subplants, are honed to the smallest practical size to ensure the highest level of productivity. Multiple subplants can be clustered to focus accountability and authority for production of product families into easily managed groups of processes. With hundreds of diagrams and using examples of companies that operate focused factories in dozens of countries, Harmon and Peterson detail both the physical and organizational changes required to make the focused factory a successful and profitable feature of a plant's modernization.In addition to creating subplants and subplant clusters, Harmon and Peterson show how manufacturers can dramatically increase productivity by adopting a plantwide plan. In its most basic form, the plantwide plan is a layout of a single factory. It includes, to the extent practical, not only the ideal layout but also step-by-step strategies for movement of individual processes from their current locations in the factory to final target destinations. Harmon and Peterson explain how managers can use the plantwide plan to eliminate the common problem of compromising ideals too early to accommodate assumed constraints and turn an existing factory into a competitive factory of the future -- today.Flexibility, creativity, and dynamic planning are key concepts for attaining superior manufacturing results. For plant modernization to be profitable, the organizational structure must keep pace. Achieving world class status is not enough. The new hallmark of excellence must be continuous improvement to maintain a superior position. The plans and suggestions outlined in Reinventing The Factory allow the entrepreneur the responsibility and authority to effect ongoing improvements and render processes adaptable to reflect additions or removals of product lines, changes in sales volume over time and modifications resulting from previous or concurrent improvements. Harmon and Peterson provide the valuable tools and methods necessary to attain such goals. They highlight the dynamic nature of progress itself and show how managers can overcome the most tenacious habit: the resistance to change. N° de réf. du vendeur AAV9781416577720

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 15,22
Autre devise

Ajouter au panier

Frais de port : Gratuit
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais
Image de l'éditeur

2.

Harmon, Roy L.; Peterson, Leroy D.
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Quantité disponible : 5
Vendeur
GreatBookPrices
(Columbia, MD, Etats-Unis)
Evaluation vendeur

Description du livre Etat : New. N° de réf. du vendeur 5509424-n

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 14,51
Autre devise

Ajouter au panier

Frais de port : EUR 2,23
Vers Etats-Unis
Destinations, frais et délais
Image fournie par le vendeur

3.

Harmon, Roy L.
Edité par Free Press 9/19/2007 (2007)
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Paperback or Softback Quantité disponible : 10
Vendeur
BargainBookStores
(Grand Rapids, MI, Etats-Unis)
Evaluation vendeur

Description du livre Free Press 9/19/2007, 2007. Paperback or Softback. Etat : New. Reinventing the Factory: Productivity Breakthroughts in Manufacturing Today. Book. N° de réf. du vendeur BBS-9781416577720

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 17,06
Autre devise

Ajouter au panier

Frais de port : Gratuit
Vers Etats-Unis
Destinations, frais et délais
Image de l'éditeur

4.

Harmon, Roy L.
Edité par Simon and Schuster (2007)
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Quantité disponible : > 20
impression à la demande
Vendeur
Paperbackshop-US
(Wood Dale, IL, Etats-Unis)
Evaluation vendeur

Description du livre Simon and Schuster, 2007. PAP. Etat : New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. N° de réf. du vendeur LQ-9781416577720

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 17,31
Autre devise

Ajouter au panier

Frais de port : Gratuit
Vers Etats-Unis
Destinations, frais et délais
Image fournie par le vendeur

5.

Harmon, Roy L.", "Peterson, Leroy D."
Edité par Free Press
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Paperback Quantité disponible : 1
impression à la demande
Vendeur
booksXpress
(Freehold, NJ, Etats-Unis)
Evaluation vendeur

Description du livre Free Press. Paperback. Etat : new. This item is printed on demand. N° de réf. du vendeur 9781416577720

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 19,48
Autre devise

Ajouter au panier

Frais de port : Gratuit
Vers Etats-Unis
Destinations, frais et délais
Image de l'éditeur

6.

Roy L. Harmon, Leroy D. Peterson
Edité par SIMON & SCHUSTER, United States (2007)
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Paperback Quantité disponible : 10
Vendeur
Book Depository hard to find
(London, Royaume-Uni)
Evaluation vendeur

Description du livre SIMON & SCHUSTER, United States, 2007. Paperback. Etat : New. Language: English. Brand new Book. The "factory of the future" is here. We have the technology and professional knowledge, say leading manufacturing consultants Roy Harmon and Leroy Peterson, to implement revolutionary concepts that many managers might regard as futuristic. In this path-breaking book, Harmon and Peterson move beyond theory to document more than a hundred real-life applications of productivity improvement -- from the focused factory and assembly process design to the plantwide plan -- gathered from Andersen Consulting, Arthur Andersen & Co.'s offices around the world.The reorganization of existing plants into multiple "factories within a factory" is the single most important feature of productivity improvement, according to Harmon and Peterson. These smaller units known as subplants, are honed to the smallest practical size to ensure the highest level of productivity. Multiple subplants can be clustered to focus accountability and authority for production of product families into easily managed groups of processes. With hundreds of diagrams and using examples of companies that operate focused factories in dozens of countries, Harmon and Peterson detail both the physical and organizational changes required to make the focused factory a successful and profitable feature of a plant's modernization.In addition to creating subplants and subplant clusters, Harmon and Peterson show how manufacturers can dramatically increase productivity by adopting a plantwide plan. In its most basic form, the plantwide plan is a layout of a single factory. It includes, to the extent practical, not only the ideal layout but also step-by-step strategies for movement of individual processes from their current locations in the factory to final target destinations. Harmon and Peterson explain how managers can use the plantwide plan to eliminate the common problem of compromising ideals too early to accommodate assumed constraints and turn an existing factory into a competitive factory of the future -- today.Flexibility, creativity, and dynamic planning are key concepts for attaining superior manufacturing results. For plant modernization to be profitable, the organizational structure must keep pace. Achieving world class status is not enough. The new hallmark of excellence must be continuous improvement to maintain a superior position. The plans and suggestions outlined in Reinventing The Factory allow the entrepreneur the responsibility and authority to effect ongoing improvements and render processes adaptable to reflect additions or removals of product lines, changes in sales volume over time and modifications resulting from previous or concurrent improvements. Harmon and Peterson provide the valuable tools and methods necessary to attain such goals. They highlight the dynamic nature of progress itself and show how managers can overcome the most tenacious habit: the resistance to change. N° de réf. du vendeur LIE9781416577720

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 25,64
Autre devise

Ajouter au panier

Frais de port : Gratuit
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais
Image de l'éditeur

7.

Harmon, Roy L.; Peterson, Leroy D.
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Quantité disponible : 5
Vendeur
GreatBookPricesUK
(Castle Donington, DERBY, Royaume-Uni)
Evaluation vendeur

Description du livre Etat : New. N° de réf. du vendeur 5509424-n

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 12,01
Autre devise

Ajouter au panier

Frais de port : EUR 16,38
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais
Image de l'éditeur

8.

Harmon, Roy L.
Edité par Free Press 2007-09 (2007)
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Quantité disponible : 1
Vendeur
Chiron Media
(Wallingford, Royaume-Uni)
Evaluation vendeur

Description du livre Free Press 2007-09, 2007. PF. Etat : New. N° de réf. du vendeur 6666-LSI-9781416577720

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 13,24
Autre devise

Ajouter au panier

Frais de port : EUR 15,67
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais
Image de l'éditeur

9.

Roy L. Harmon
Edité par Simon & Schuster
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Paperback Quantité disponible : 5
impression à la demande
Vendeur
THE SAINT BOOKSTORE
(Southport, Royaume-Uni)
Evaluation vendeur

Description du livre Simon & Schuster. Paperback. Etat : New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days. N° de réf. du vendeur C9781416577720

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 18,62
Autre devise

Ajouter au panier

Frais de port : EUR 13,05
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais
Image de l'éditeur

10.

Harmon, Roy L.
Edité par - -
ISBN 10 : 1416577726 ISBN 13 : 9781416577720
Neuf Quantité disponible : 20
Vendeur
Chiron Media
(Wallingford, Royaume-Uni)
Evaluation vendeur

Description du livre - -. Etat : New. N° de réf. du vendeur 6666-ING-9781416577720

Plus d'informations sur ce vendeur | Contacter le vendeur

Acheter neuf
EUR 18,37
Autre devise

Ajouter au panier

Frais de port : EUR 15,67
De Royaume-Uni vers Etats-Unis
Destinations, frais et délais

autres exemplaires de ce livre sont disponibles

Afficher tous les résultats pour ce livre