Type d'article
Etat
Reliure
Particularités
Pays
Evaluation du vendeur
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1992
ISBN 10 : 1854860534ISBN 13 : 9781854860538
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. A guide to military modelling, written by the editor of Military Modelling magazine. The book covers figure and vehicle scales, research, tools and materials, making and painting figures, vehicles and dioramas. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 2000
ISBN 10 : 1854861980ISBN 13 : 9781854861986
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. An overview of electric flight technology at the end of the 20th century, and the range of models that it makes possible. It interprets the technological choices to be made by the modeller and illustrates practical ways to ensure success in electric flight from the start. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 2006
ISBN 10 : 185486243XISBN 13 : 9781854862433
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. Electronic and electromechanical control of machinery and equipment in the factory environment has been commonplace for many years and is steadily finding its place in the model engineer's workshop. This book gives the theoretical and practical details of electronic circuits that can be used to control machinery for the model engineer and the 'inventor'. There has recently been a huge expansion in computer and electronic control which model engineers have found desirable, yet expensive. Here, the author provides the vital information for the model engineer to build his own control units using a modular, or 'building block', approach. Very clear easy-to-follow circuit diagrams and instructions are at the heart of the book, enabling the model engineer to analyse his requirements and assemble the building blocks using readily available components and commonplace workshop skills. The book brings modern machinery control technology within reach of the model engineer, the robotics enthusiast and the experimenter. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 29,59
Offres d'occasion à partir de EUR 2,86
Trouvez également Couverture souple
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1979
ISBN 10 : 0852426186ISBN 13 : 9780852426180
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1999
ISBN 10 : 1854861956ISBN 13 : 9781854861955
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. Cider is a quite delicious drink which has been known for thousands of years and which has enjoyed a fashionable makeover in recent years. This practical book by Michael Pooley and John Lomax, both cidermakers of national repute for more than 20 years, explores both modern and traditional approaches, and has been designed to enable the enthusiast using any type of apples to make real cider with skill and confidence. The book covers the history of cidermaking, techniques for preserving apple juice for drinking, washing and crushing the apples, pressing the pulp, fermentation, blending and storing, cider-based recipes, the making of perry from pears and also includes instructions and a set of superb scaled plans for building an inexpensive cider press using hardwood or good quality softwood. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 13,53
Offres d'occasion à partir de EUR 4,78
Trouvez également Couverture souple
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1986
ISBN 10 : 0852428596ISBN 13 : 9780852428597
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Good. The book has been read but remains in clean condition. All pages are intact and the cover is intact. Some minor wear to the spine.
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1992
ISBN 10 : 1854860747ISBN 13 : 9781854860743
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. A guide to the world of model railways. The author covers all aspects of the hobby - from scales to electrics and from rivers to rolling stock. The contents cover topics ranging from layout construction to scenics and prototype details. The author is the editor of Model Railways magazine. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1998
ISBN 10 : 0852429126ISBN 13 : 9780852429129
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 2007
ISBN 10 : 1854862464ISBN 13 : 9781854862464
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. This book deals with principles and characteristics of the wide range of motor types likely to be useful in small engineering workshop applications. It also covers matters such as speed control, electric braking, generators, installation and safety aspects - everything, in fact, of practical value to the small workshop user. In the years since the publication of the first edition, the book has become a well-established reference source for users to dip into when more information is needed on how motors behave both in standard usage and also in less common applications. In this time a lot has happened in the field of motor design. This second edition now contains updated information covering both these later developments in motor types and their control systems. A major section is devoted to the characteristics and installation of Variable Frequency Drive units (VFDs). It also covers the operating differences between North American and European power systems. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 20,11
Offres d'occasion à partir de EUR 5,24
Trouvez également Couverture souple
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1998
ISBN 10 : 0852428375ISBN 13 : 9780852428375
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. In this valuable book Tubal Cain takes the reader beyond the superficial or the simply practical with explanations of the composition of steel, its additives, and the effects of different temperatures on its constituents. With a grasp of what changes are actually taking place in the metal the care needed in following the practical processes described becomes understandable and will lead to better and more consistent results. Flame, salt bath and furnace heating are detailed, with information on accurate measurement or recognition of temperature levels. For the average small workshop operative or model engineer the discourses on tool material, hardening and tempering will be of most use, and in this connection this book replaced the author's earlier Hardening and Tempering Engineers' Tools, providing a broader-based, more detailed and up to date examination of the subject. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,89
Offres d'occasion à partir de EUR 5,26
Trouvez également Couverture souple
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1998
ISBN 10 : 1854861239ISBN 13 : 9781854861238
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. Originally published in 1963, this was the first modern book on home brewing and was an instant success. Since then, the book has gone through many revised and improved editions and to date has sold 750,000 copies. This latest edition contains full instructions on how to brew fine beers and stouts of authentic flavour and strength. From palest lager to blackest extra stout, these are brews of which you can be proud. There is much more to the home brewing hobby than simply making up a kit; home brewers need to know the theory behind the techniques they use and how to devise their own formulations for any type of beer. This book is the ideal introduction to the subject. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 13,75
Offres d'occasion à partir de EUR 5,44
Trouvez également Couverture souple
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 2007
ISBN 10 : 1854862472ISBN 13 : 9781854862471
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. Brian King has earned an international reputation for the quality of his models, all built using skills initially learned during a 5-year craft apprentice-ship when he acquired the basic practical skills in both wood and metal work. These skills, allied to a natural talent, have resulted in his very complicated models of large battleships from all eras. This book is a compilation of material originally published in the specialist hobby magazine Model Boats in which the master modeller has passed on many gems of experience to would-be builders of ship models, including anchors, gun barrels, portholes, decking, rudders, propellors, fittings; turrets; basic hulls; close-up on life saving gear; cowl ventilators; computers and modelling, photographing your models and working to dimensions. A lifetime of modelling experience is contained within these pages. There are few modellers, expert or novice, who will not benefit from this opportunity to read and learn. Previous books by Brian King include Advanced Ship Modelling (2000; 1-85486-122-0) and Photo Etching (2005; 1-85486-237-5). The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 22,53
Offres d'occasion à partir de EUR 6,28
Trouvez également Couverture souple
Edité par Special Interest Model Books, Hemel Hempstead, 1998
ISBN 10 : 0852428626ISBN 13 : 9780852428627
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. The techniques of depositing a thin metallic layer on an object for decoration, corrosion protection, electrical conductivity, wear resistance and so on have been known for many years but have been developed and improved to a remarkable extent in the second half of this century. This book sets out to discuss the principles and practice of those forms of plating most suited to the amateur and small workshop, using relatively simple and inexpensive equipment to produce results virtually undetectable from work carried out by major plating concerns. Jack Poyner, a professional involved in all forms of plating for many years, is also a keen model engineer able to recognise the dividing line between what his average fellow enthusiast would consider practical and worthwhile and what is really better left to experts in the field. The result is a really useful and practical book, which will be of value to both amateur and light industrial users in many diverse fields. This title, which replaced the very popular Electroplating for the Amateur, will be of value to model engineers and small workshops wishing to plate with any of the customary metals using simple equipment. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,08
Edité par Special Interest Model Books, Hemel Hempstead, 1998
ISBN 10 : 085242843XISBN 13 : 9780852428436
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. The increasing appearance of vertical milling machines in model engineers' and other small workshops has brought the versatility of this type of machine to the notice of a large and growing group of potential users, but until the first edition of this book was published in 1977 there was little available guidance for the average amateur or small user. This third revised edition includes descriptions of many of the very wide range of operations possible with photographed examples, plus information on machines, accessories, cutters, chucks, requirements and methods of work-holding. Small workshops, including those of model engineers, are making increasing use of small vertical milling machines. This book explains how to use them (and lathe milling attachments) in clear terms. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,24
Edité par Special Interest Model Books, Hemel Hempstead, 1998
ISBN 10 : 0852428456ISBN 13 : 9780852428450
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. Joining metals by one form or another of soft or hard soldering, or brazing with various alloys, are run-of-the-mill jobs in model and light engineering workshops - so much so that little thought is given as to whether there might be a quicker, more efficient or less expensive means of achieving the required end. In Soldering and Brazing respected engineering writer Tubal Cain examines in detail the processes, equipment and materials, and explains what is happening in the joints as they are made with practical examples, test pieces, tabulated data etc. This is a thorough, comprehensive and, above all, useful book. Joining metal by one form or another of soft and hard soldering, or brazing with various alloys, are run-of-the-mill jobs in model and light engineering workshops. Tubal Cain examines the processes, equipment, materials and explains what is happening in the joints as they are made. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,26
Offres d'occasion à partir de EUR 7,30
Trouvez également Couverture souple
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1982
ISBN 10 : 0852428065ISBN 13 : 9780852428061
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres d'occasion à partir de EUR 6,69
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1976
ISBN 10 : 0852424663ISBN 13 : 9780852424667
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Good. The book has been read but remains in clean condition. All pages are intact and the cover is intact. Some minor wear to the spine.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres d'occasion à partir de EUR 6,69
Edité par Special Interest Model Books, Hemel Hempstead, 1998
ISBN 10 : 185486145XISBN 13 : 9781854861450
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. For nearly a hundred years "Model Engineer" magazine has proved a source of knowledge for a wide variety of engineering practices. Its readership has included many highly experienced engineers, who have answered queries and contributed valuable information in order that everyone involved in the construction and use of machines should be able to extend both scope and skills. Many of the pieces of information regarded as most useful appeared in brief notes or articles, often many years ago, and were never republished. This compilation offers a selection of hints and tips culled from a wide time-scale of the magazine. They may save the reader time and money, and will interest and instruct anyone who works with metal. A selection of useful hints and tips for metalworkers culled from a seventy years of Model Engineer magazine - as relevant today as when they were first printed. Includes many helpful nuggets of knowledge which have never been republished until now. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,33
Edité par Special Interest Model Books, Hemel Hempstead, 1998
ISBN 10 : 1854861565ISBN 13 : 9781854861566
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. Full size photocopiable plans for eight flying models using carbon dioxide power. These classic facsimile designs originally appeared in Aeromodeller magazine between 1981 and 1987. Full size photocopiable plans for eight flying models using carbon dioxide power. These classic facsimile designs originally appeared in Aeromodeller magazine between 1981 and 1987. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,33
Edité par Special Interest Model Books, Hemel Hempstead, 1998
ISBN 10 : 0852428863ISBN 13 : 9780852428863
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. The accumulation of odds and ends of bar and rod is inevitable with any lathework, but rather than throw them into an ever-growing scrap-box, why not turn them into useful little tools to simplify and speed up future work? In this book Stan Bray describes twenty-two simple but useful adjuncts to the tool kit for bench and lathe use, none taking any more than 3 to 4 hours or involving special materials, yet each able to save considerable time in use as well as aiding accuracy. You may not see an immediate need for some of them, but once made it is surprising how often they will be used. There is also the satisfaction of turning what might have been wasted into something useful and the knowledge that money has been saved. Making twenty-two simple but useful adjuncts to the tool kit for bench and lathe use, none taking any more than 3 to 4 hours or involving special materials, yet each able to save considerable time in use as well as aiding accuracy. With working drawings, photographs and sketches etc. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,37
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1982
ISBN 10 : 0852427441ISBN 13 : 9780852427446
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Edité par Special Interest Model Books, Hemel Hempstead, 1998
ISBN 10 : 0852429088ISBN 13 : 9780852429082
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. The centre-lathe is by far the most versatile machine tool in the workshop, but as soon as you depart from plain turning between centres, the question arises 'how to hold the work'. This book explains the methods and techniques required. A fundamental requirement of lathe operation, for accuracy and safety, is the ability to hold any workpiece securely and, preferably, repeatedly on the machine. While few problems arise with straightforward work on a properly aligned lathe, the variety of jobs undertaken by small workshops and model engineers is bound to give rise to occasions when how to hold work requires consideration. When great accuracy is essential, working methods and lathe set-up are vital for an acceptable result. In this book Tubal Cain discusses in his inimitable, practical style all aspects of the subject with the whys and hows, including basic lathe alignment. A fundamental requirement of the lathe operation is the ability to hold any workpiece securely on the machine. In this book, the author discusses all the practical aspects of the subject, with photographs to illustrate specific points. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,71
Edité par Special Interest Model Books, Hemel Hempstead, 2006
ISBN 10 : 1854862413ISBN 13 : 9781854862419
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. Sharpening workshop tools is probably the most diverse of all workshop activities and the one that is least understood by the majority of workshop owners. This is not unreasonable in view of the wide range of equipment suggested for the task, ranging from the complex, typically an industrial tool and cutter grinder, through to the humble off hand grinder. This book illustrates how most sharpening tasks can be carried out using an off hand grinder and a few simply made accessories, whilst doing this to a standard comparable to that achieved using much more sophisticated equipment. A lack of understanding of the processes almost certainly results in the workshop owner attempting tasks with far from perfect cutting tools that can diminish the satisfaction of a job well done. With the information in this book this situation can be avoided and working with blunt tooling should be a thing of the past. Sharpening workshop tools is one task that is least understood by the majority of workshop owners. This book illustrates how most sharpening tasks can be carried out using an off hand grinder and a few simply made accessories to a standard comparable to that achieved using much more sophisticated equipment. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,73
Offres d'occasion à partir de EUR 13,97
Trouvez également Couverture souple
Edité par Special Interest Model Books, Hemel Hempstead, 2008
ISBN 10 : 1854862502ISBN 13 : 9781854862501
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. Every working model includes bearings, often a large number of them. This practical book describes the wide and diverse range of bearings found in the large variety of different types of models built in home workshops. It reviews the choice of bearings materials, the type of bearing to use for each particular application and highlights the differences between home-made and off-the-shelf bearings. It also considers the installation and care of bearings. Furthermore, it covers several full-size applications undertaken by model engineers, such as clock making and machine tool maintenance, which also call for some knowledge of bearings. It is now over forty years since Ian Bradley and Norman Hallows published the slim MAP volume Bearing Design and Fitting and much has changed in the bearing field since that date. This book provides a welcome addition to the Workshop Practice Series of books and will be welcomed by all model engineers, whatever their area of interest. This practical book describes the wide range of bearings found in different types of models built in home workshops. It reviews the choice of bearings, materials, the type of bearing to use for each particular application and highlights the differences between home made and off-the-shelf bearings. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,75
Edité par Special Interest Model Books, United Kingdom, Hemel Hempstead, 1976
ISBN 10 : 0852425155ISBN 13 : 9780852425152
Vendeur : WorldofBooks, Goring-By-Sea, WS, Royaume-Uni
Livre
Paperback. Etat : Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres d'occasion à partir de EUR 7,21
Edité par Special Interest Model Books, Hemel Hempstead, 2001
ISBN 10 : 1854862138ISBN 13 : 9781854862136
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre Edition originale
Paperback. Etat : new. Paperback. The Unimat 3 was a well made and enormously popular lathe; when equipped with a range of accessories it is still an excellent machine for smaller modelling and experimental jobs; it will accomplish in miniature what many larger machines are capable of and will provide the owner with enormous satisfaction. Bob Loader has become an authority on the Unimat mini-lathe, developing numerous accessories and techniques to assist the model engineer in getting the best from the machine. The projects described here increase the scope of the machine and advise on the performance of a number of tricky operations. Invaluable to all Unimat owners. A Unimat mini-lathe authority has developed numerous accessories and techniques to assist the model engineer in getting the best from the machine. These projects increase the scope of the machine and advise on the performance of a number of tricky operations. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,90
Trouvez également Edition originale
Edité par Special Interest Model Books, Hemel Hempstead, 1999
ISBN 10 : 1854861921ISBN 13 : 9781854861924
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. A description of the many varied materials used by model engineers in their workshops and a reference to finding the right material for a task or an item specified on a technical plan. The book is aimed at those who build locomotives, traction, boat and stationery steam engines, oil, diesel, glow and petrol engines, gas turbines, artillery pieces, farming appliances, road vehicles, horse carriages and clocks. It is also directed at engineers who work with full-size machinery, such as vintage and veteran cars, motor and pedal cycles, traction engines and railways. Materials covered include: iron and steel; non-ferrous metals and alloys; aluminium; brass; copper; hard and soft abrasives; bearing materials; ceramics; refractory materials; glass; silicon; soft and hard woods; plywood; MDF; chipboard; thermoplastics; concrete; coatings; electroplating solutions; fuels; gases; lubricants; polishing materials; pickles; sealants; solders; and adhesives. This book describes the many and varied materials used by model engineers in their workshops such as ferrous and non-ferrous metals, hard and soft woods, plastics, abrasives, adhesives, bearing materials, ceramic and refractory materials, castings, electroplating solutions, fuels, gases, lubricants, pickles, polishing materials, sealants and solder Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,90
Edité par Special Interest Model Books, Hemel Hempstead, 2011
ISBN 10 : 1854862626ISBN 13 : 9781854862624
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment, such as lathes, drilling machines and milling machines, which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. This book provides an invaluable source of practical guidance on how anyone can find out the type of electrical equipment they have, and how to convert it to run on a single-phase supply. The book provides calculations, step-by-step instructions with photographs and diagrams and covers electricity supplies in the UK, North America, Europe and the rest of the world. Finally, it also advises on which equipment cannot be converted at all. A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 12,97
Edité par Special Interest Model Books, Hemel Hempstead, 1998
ISBN 10 : 0852429118ISBN 13 : 9780852429112
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. Gears in one form or another are a part of most mechanisms, but they are by no means as simple as they may appear. This book explains simply, clearly and comprehensively the underlying theory involved and, in its second part, how to cut gears on a lathe or milling machine. Explanations and reasons for all conventional types of gears are clearly set out in this book together with useful tables and machinery techniques to form an invaluable reference work for anyone dealing with machinery. It covers all the questions raised by enthusiasts who have watched the author demonstrating gear-cutting techniques at exhibitions throughout Britain, where his advice on engineering matters has been constantly sought. Explanations and reasons for all conventional types of gears are clearly set out in this book together with useful tables and machinery techniques to form an invaluable reference work for anyone dealing with machinery. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 13,01
Edité par Special Interest Model Books, Hemel Hempstead, 2009
ISBN 10 : 1854862529ISBN 13 : 9781854862525
Vendeur : Grand Eagle Retail, Wilmington, DE, Etats-Unis
Livre
Paperback. Etat : new. Paperback. This latest volume in the Workshop Practice Series presents a general overview of the grinding, lapping, honing and polishing of metal, as well as the materials used to make grinding wheels, belts and papers. The uses of various machines and grinding mediums are described, including the off-hand grinder, modern miniature hand drill/grinders and toolpost grinders. There are also instructions for making a small barrelling machine and other suitable devices. A complete introduction to the process of the grinding and polishing of metals that gives specific details of the equipment and devices needed and the materials used to make grinding wheels, belts and papers. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Plus de choix d'achat de la part d'autres vendeurs sur AbeBooks
Offres neuf à partir de EUR 13,04