metal matrix composites (812 résultats)

Hardcover. Etat : Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 0.95.

Etat : Très bon. Metal Matrix Composites: Testing, Analysis, and Failure Modes | Johnson | ASTM, 1989. In-8° cartonné, 288 pages. Couverture propre. Dos solide. Intérieur frais sans soulignage ou annotation. Exemplaire de bibliothèque : petit code barre en pied de 1re de couv., cotation au dos, rares et discrets petits tampons à l'intérieur de l'ouvrage. Très bon exemplaire [Ba 42+].

Hardcover. Etat : Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 1.46.

Cloth. Etat : Wie neu. 421 S. Physical Science Physics Guter Zustand/ Good With figures and tables. Ex-Library. Cover worn. gebraucht; gut Guter Zustand/ Good With figures and tables. Ex-Library. Cover worn. ha1068241 Sprache: Englisch Gewicht in Gramm: 770.

XXII, 310 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Etat : Very Good. 151 pp., spiral-bound softcover, minor library markings else very good. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Etat : Very Good. Very Good condition. Volume 4. A copy that may have a few cosmetic defects. May also contain light spine creasing or a few markings such as an owner's name, short gifter's inscription or light stamp.

Etat : Good. 305 pp., hardcover, ex library, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Etat : New. pp. 34.

hardcover. Etat : Sehr gut. 330 Seiten; 9783527313600.2 Gewicht in Gramm: 1.

Soft Cover. Etat : Good. No Jacket. First Thus. From an academic library with the usual stamps etc. Covers have been laminated. This item is heavy and will attract postal surcharges.

Etat : Sehr gut. Zustand: Sehr gut | Produktart: Bücher.

Etat : Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Etat : New. In.

Etat : Very Good. 421 pp., Hardcover, minor ownership markings to the front free endpaper, else very good. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Etat : Very Good. Used - Very Good.

Etat : Très bon. Corrosion of Aluminium-based Metal Matrix Composites | Lucas, Clarke | RSP, 1993. In-8° cartonné, 140p. Couverture propre. Dos solide. Intérieur frais sans soulignage ou annotation. Exemplaire de bibliothèque : petit code barre en pied de 1re de couv., cotation au dos, rares et discrets petits tampons à l'intérieur de l'ouvrage. Très bon état général pour cet ouvrage . [NM34+].

Etat : New. In.

Etat : Gut. Zustand: Gut | Seiten: 400 | Sprache: Englisch | Produktart: Bücher.

Hardcover. Etat : UsedGood. Hardcover; surplus library copy with the usual stampings; reference number taped to spine; fading and shelf wear to exterior; otherwise in good condition with clean text, firm binding.

Hardcover. Etat : Good. No Jacket. First Edition. Ex library with usual markings. Includes non-metallic hybrid composite analysis, design, application and fabrication. 260 pages.

Taschenbuch. Etat : Neu. Neuware -Aluminum is a lightweight material. Its strength, stiffness, hardness and wear resistance can be improved by adding ceramic particles like SiC, Al2O3 and TiB2. Aerospace, aeronautics and automobile engineering components are very much depend on the composite like aluminium based SiC particulates reinforced metal matrix composites. There is a challenge of the addition and uniform distribution of SiC particles in an aluminium matrix in the casting process. Hardness improves due to the addition of SiC particle in an aluminium matrix which is different from individual matrices. Hardness and Wear resistance will increase by increasing SiC particles because it is harder than other ceramic particles. In our work, relatively low cost method of Stir casting for producing Al based SiC metal matrix composite has been taken. Different particle size (Books on Demand GmbH, Überseering 33, 22297 Hamburg 80 pp. Englisch.

Taschenbuch. Etat : Neu. Neuware -This study focused on optimizing turning process parameters such as spindle speed ,feed rate ,depth of cut and nose radius for performance characteristics, namely, surface roughness and material removal rate during turning of aluminium based MMCs using a coated tungsten carbide tool. Experiments were carried out as per Taguchi¿s orthogonal L16 array. Taguchi¿s signal to noise ratio and analysis of variance methods were used to find out the most significant parameter that effects on surface roughness and material removal rate. This work also focuses on the chip formation during the turning of aluminium metal matrix composites and to study the influence of machining conditions and surface roughness on the chip geometry. Based on the experimental results on chip formation mechanism in machining of Al/SiC composites. Statistical analysis was found that coolant, spindle speed, feed rate, depth of cut and nose radius are most significant process parameters.Books on Demand GmbH, Überseering 33, 22297 Hamburg 76 pp. Englisch.

Etat : Sehr gut. Zustand: Sehr gut | Seiten: 248 | Sprache: Englisch | Produktart: Sonstiges.

Taschenbuch. Etat : Neu. Neuware -The metal matrix composites is a combination of two or more metals combined, which are remarkably different in chemical and physical properties. The composite material has two constituents viz., matrix and reinforcements. The reinforcements are added to enhance the mechanical properties and wear resistance of the composites. Industries are focused to develop a novel material with low cost with high-performance which leads to the fabrication of hybrid composites. The hybrid metal matrix composite materials are mostly used in automobile, aerospace, defence and marine applications because of its high impressive mechanical and wear resistance properties.Books on Demand GmbH, Überseering 33, 22297 Hamburg 72 pp. Englisch.

Taschenbuch. Etat : Neu. Neuware -Copper based hybrid metal matrix composites reinforced with graphite and SiC by powder metallurgy route takes advantage of both graphite and SiC. Graphite helps in improving the wear resistance as graphite acts as a lubricating film on the contact surface and it's having a small coefficient of thermal expansion, but hardness decreases due to the softness of graphite. SiC helps in improving the hardness of the composite. Copper based hybrid metal matrix composites are used in many electrical contact applications like contact bushes and bearing materials. Cu based metal matrix composite is also used as a heat sink because of its low coefficient of thermal expansion and packaging of microelectronics compact. In our present investigation, attempts have been made to fabricate Copper¿graphite-SiC hybrid metal matrix composites by powder metallurgy route. The main aim is to study the microstructural behaviors and improve the mechanical properties and wear resistance of composite with a minor loss of electrical conductivity.Books on Demand GmbH, Überseering 33, 22297 Hamburg 72 pp. Englisch.

Taschenbuch. Etat : Neu. Neuware -Composite materials consist of two or more materials which are distinct in physical and chemical properties. The major constituent is matrix and reinforcements have been added to improve the mechanical properties of composites. Matrix is continuous phase in composites which transfer loads to the reinforcements during the application of load. Reinforcements in the form of particles, fibers, whiskers have been added in matrix which significantly improves the mechanical properties and wear resistance. Hence metal matrix composites have been widely used in automotive, aerospace, marine and defense applications.Books on Demand GmbH, Überseering 33, 22297 Hamburg 52 pp. Englisch.

Taschenbuch. Etat : Neu. Neuware -This book is primarily focused to develop composites materials through an alternative technology for the manufacture of brake pads for heavy-duty applications. These brake pads are characterized by the quality of the developed pads against conventionally used phenolic-resin/sintered products. This objective has been successfully written and it can be reasonably concluded that this investigation in section B has seeded the development of Al based brake pads for the first time using an alternative processing route. The detailed significant achievements have been listed as follows, chronologically, in accordance with objectives: (i) ¿Hot Powder Preform Forging¿ technology for the manufacturing of friction materials overcoming the limitations of sintering process has been successfully developed for the first time; (ii) Complete elimination of Inert/vacuum/reducing environments associated with conventional sintering and secondary processes; (iii) The developed technology overcomes the problems of joining between backing plate and friction element because of simultaneous application of pressure and temperature.Books on Demand GmbH, Überseering 33, 22297 Hamburg 52 pp. Englisch.

Taschenbuch. Etat : Neu. Neuware -Metal matrix composite (MMC) is a metal matrix reinforced with a second phase which may be a ceramic of various sizes. Metal matrix nano composites (MMNCs) are the ones with nano-sized reinforcements. Numerous processing techniques have been developed to manufacture MMNCs on the commercial scale including semi-solid technique (compocasting) in which mixing of reinforcing nano particles into the matrix is facilitated by the high effective viscosity of the metal slurry. EMS assisted compocast composites offer uniform distribution of nano particles with concomitant superior wear resistance. This book elaborates on optimization, fabrication and characterization of nano Al2O3 reinforced Al matrix composites. Adaptive neuro-fuzzy inference system combined with particle swarm optimization method can be used for optimization of the process parameters.Books on Demand GmbH, Überseering 33, 22297 Hamburg 88 pp. Englisch.

Etat : Sehr gut. Zustand: Sehr gut | Seiten: 300 | Sprache: Englisch | Produktart: Bücher.