Articles liés à Modeling of Metal Forming and Machining Processes:...

Modeling of Metal Forming and Machining Processes: By Finite Element and Soft Computing Methods - Couverture rigide

 
9781848001886: Modeling of Metal Forming and Machining Processes: By Finite Element and Soft Computing Methods

Synopsis

The use of computational techniques is increasing day by day in the manufacturing sector. Process modeling and optimization with the help of computers can reduce expensive and time consuming experiments for manufacturing good quality products. Metal forming and machining are two prominent manufacturing processes. Both of these processes involve large deformation of elasto-plastic materials due to applied loads. In metal forming, the material is plastically deformed without causing fracture. On the other hand, in machining, the material is deformed till fracture, in order to remove material in the form of chips. To understand the physics of metal forming and machining processes, one needs to understand the kinematics of large deformation (dependence of deformation and its rate on displacement) as well as the constitutive behavior of elasto-plastic materials (dependence of internal forces on deformation and its rate). Once the physics is understood, these phenomena have to be converted to mathematical relations in the form of differential equations. The interaction of the work-piece with the tools/dies and other surroundings also needs to be expressed in a mathematical form (known as the boundary and initial conditions). In this book, the first four chapters essentially discuss the physics of metal forming and machining processes. The physical behavior of the work-piece during the processes is modeled in the form of differential equations and boundary and initial conditions.

Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.

À propos de l?auteur

Prof. P. M. Dixit has been actively working in the area of metal forming, machining and non-traditional machining for the past 20 years. He has published extensively in leading international journals and carried out projects in the area of metal forming and large deformation. He also teaches Metal Forming, Plasticity and FEM to postgraduate and senior undergraduate students. Prof. P.M. Dixit obtained his bachelors degree in Aeronautical Engineering from the Indian Institute of Technology, Kharagpur, in 1974. He was awarded a silver medal for securing the first rank in the Department. Subsequently, he obtained his doctoral degree in Mechanics from the University of Minnesota, Minneapolis, U.S.A, in 1979. After receiving his Ph.D. degree, Prof. Dixit taught at the Aeronautical Engineering Department of the Indian Institute of Technology, Kharagpur for 4 years (1980-1984). Since 1984, Prof. Dixit has been teaching at the Mechanical Engineering Department of the Indian Institute of Technology, Kanpur.

Prof. U. S. Dixit has more than a decade's experience in carrying out research in the area of metal forming and machining. Apart from FEM, he uses fuzzy set theory and neural networks in his research. Before taking up a research career, he worked for four years as a machine tool designer in HMT Ltd. Pinjore, India. He has a number of publications, some of them jointly with Prof. P.M. Dixit. Prof. U. S. Dixit is currently a Professor of Mechanical Engineering at the Indian Institute of Technology in Guwahati. Prof. U. S. Dixit obtained his bachelors degree in Mechanical Engineering from the Indian Institute of Technology, Roorkee in 1987. He gained his M. Tech in Mechanical Engineering and his Ph.D. in Mechanical Engineering from the Indian Institute of Technology, Kanpur, in 1993 and 1998 respectively.

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

Acheter D'occasion

état :  Très bon
Zustand: Sehr gut | Seiten: 608...
Afficher cet article
EUR 156,37

Autre devise

Gratuit expédition depuis Allemagne vers France

Destinations, frais et délais

Acheter neuf

Afficher cet article
EUR 124,35

Autre devise

Gratuit expédition depuis Etats-Unis vers France

Destinations, frais et délais

Autres éditions populaires du même titre

9781849967495: Modeling of Metal Forming and Machining Processes: by Finite Element and Soft Computing Methods

Edition présentée

ISBN 10 :  1849967490 ISBN 13 :  9781849967495
Editeur : Springer, 2010
Couverture souple

Résultats de recherche pour Modeling of Metal Forming and Machining Processes:...

Image d'archives

Dixit, Prakash Mahadeo; Dixit, U.S.
Edité par Springer, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide

Vendeur : Romtrade Corp., STERLING HEIGHTS, MI, Etats-Unis

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide. N° de réf. du vendeur ABNR-88491

Contacter le vendeur

Acheter neuf

EUR 124,35
Autre devise
Frais de port : Gratuit
De Etats-Unis vers France
Destinations, frais et délais

Quantité disponible : 1 disponible(s)

Ajouter au panier

Image d'archives

0
Edité par Springer, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide

Vendeur : Basi6 International, Irving, TX, Etats-Unis

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service. N° de réf. du vendeur ABEJUNE24-244579

Contacter le vendeur

Acheter neuf

EUR 124,35
Autre devise
Frais de port : EUR 2,85
De Etats-Unis vers France
Destinations, frais et délais

Quantité disponible : 1 disponible(s)

Ajouter au panier

Image d'archives

U. S. Dixit, Prakash Mahadeo Dixit
Edité par Springer London, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Ancien ou d'occasion Couverture rigide

Vendeur : Buchpark, Trebbin, Allemagne

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : Sehr gut. Zustand: Sehr gut | Seiten: 608 | Sprache: Englisch | Produktart: Bücher. N° de réf. du vendeur 4232552/12

Contacter le vendeur

Acheter D'occasion

EUR 156,37
Autre devise
Frais de port : Gratuit
De Allemagne vers France
Destinations, frais et délais

Quantité disponible : 1 disponible(s)

Ajouter au panier

Image d'archives

Prakash Mahadeo Dixit U.S. Dixit
Edité par Springer, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide

Vendeur : Books Puddle, New York, NY, Etats-Unis

Évaluation du vendeur 4 sur 5 étoiles Evaluation 4 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : New. pp. 608. N° de réf. du vendeur 26459881

Contacter le vendeur

Acheter neuf

EUR 180,43
Autre devise
Frais de port : EUR 7,67
De Etats-Unis vers France
Destinations, frais et délais

Quantité disponible : 1 disponible(s)

Ajouter au panier

Image fournie par le vendeur

Prakash Mahadeo Dixit|U.S. Dixit
Edité par Springer London, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide
impression à la demande

Vendeur : moluna, Greven, Allemagne

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Gebunden. Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Uses original mathematic approach in design and manufacturing processes Provides algorithms to help readers develop codes Written by authorities in the subject Prof. P. M. Dixit has been actively working in the area of metal forming,. N° de réf. du vendeur 4286395

Contacter le vendeur

Acheter neuf

EUR 180,07
Autre devise
Frais de port : EUR 9,70
De Allemagne vers France
Destinations, frais et délais

Quantité disponible : Plus de 20 disponibles

Ajouter au panier

Image d'archives

Dixit Prakash Mahadeo Dixit U.S.
Edité par Springer, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide

Vendeur : Majestic Books, Hounslow, Royaume-Uni

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : New. pp. 608 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam. N° de réf. du vendeur 7388086

Contacter le vendeur

Acheter neuf

EUR 184,74
Autre devise
Frais de port : EUR 10,25
De Royaume-Uni vers France
Destinations, frais et délais

Quantité disponible : 1 disponible(s)

Ajouter au panier

Image d'archives

Dixit Prakash Mahadeo Dixit U.S.
Edité par Springer, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide

Vendeur : Biblios, Frankfurt am main, HESSE, Allemagne

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : New. pp. 608. N° de réf. du vendeur 18459875

Contacter le vendeur

Acheter neuf

EUR 195,22
Autre devise
Frais de port : EUR 7,95
De Allemagne vers France
Destinations, frais et délais

Quantité disponible : 1 disponible(s)

Ajouter au panier

Image fournie par le vendeur

U. S. Dixit
Edité par Springer London Mai 2008, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide
impression à la demande

Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Buch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Written by authorities in the subject, this book provides a complete treatment of metal forming and machining by using the computational techniques FEM, fuzzy set theory and neural networks as modelling tools. The algorithms and solved examples included make this book of value to postgraduates, senior undergraduates, and lecturers and researchers in these fields. Research and development engineers and consultants for the manufacturing industry will also find it of use. 608 pp. Englisch. N° de réf. du vendeur 9781848001886

Contacter le vendeur

Acheter neuf

EUR 213,99
Autre devise
Frais de port : EUR 11
De Allemagne vers France
Destinations, frais et délais

Quantité disponible : 2 disponible(s)

Ajouter au panier

Image fournie par le vendeur

U. S. Dixit
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide

Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Buch. Etat : Neu. Neuware -The use of computational techniques is increasing day by day in the manufacturing sector. Process modeling and optimization with the help of computers can reduce expensive and time consuming experiments for manufacturing good quality products. Metal forming and machining are two prominent manufacturing processes. Both of these processes involve large deformation of elasto-plastic materials due to applied loads. In metal forming, the material is plastically deformed without causing fracture. On the other hand, in machining, the material is deformed till fracture, in order to remove material in the form of chips. To understand the physics of metal forming and machining processes, one needs to understand the kinematics of large deformation (dependence of deformation and its rate on displacement) as well as the constitutive behavior of elasto-plastic materials (dependence of internal forces on deformation and its rate). Once the physics is understood, these phenomena have to be converted to mathematical relations in the form of differential equations. The interaction of the work-piece with the tools/dies and other surroundings also needs to be expressed in a mathematical form (known as the boundary and initial conditions). In this book, the first four chapters essentially discuss the physics of metal forming and machining processes. The physical behavior of the work-piece during the processes is modeled in the form of differential equations and boundary and initial conditions.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 608 pp. Englisch. N° de réf. du vendeur 9781848001886

Contacter le vendeur

Acheter neuf

EUR 213,99
Autre devise
Frais de port : EUR 15
De Allemagne vers France
Destinations, frais et délais

Quantité disponible : 2 disponible(s)

Ajouter au panier

Image d'archives

Dixit, Prakash Mahadeo; Dixit, U.S.
Edité par Springer, 2008
ISBN 10 : 1848001886 ISBN 13 : 9781848001886
Neuf Couverture rigide

Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni

Évaluation du vendeur 5 sur 5 étoiles Evaluation 5 étoiles, En savoir plus sur les évaluations des vendeurs

Etat : New. In. N° de réf. du vendeur ria9781848001886_new

Contacter le vendeur

Acheter neuf

EUR 228,17
Autre devise
Frais de port : EUR 4,62
De Royaume-Uni vers France
Destinations, frais et délais

Quantité disponible : Plus de 20 disponibles

Ajouter au panier

There are 3 autres exemplaires de ce livre sont disponibles

Afficher tous les résultats pour ce livre