Automotive Engineering: Powertrain, Chassis System and Vehicle Body - Couverture rigide

Couverture rigide

ISBN 10 : 1856175774 ISBN 13 : 9781856175777

Editeur : Butterworth-Heinemann Ltd, 2009

Synopsis

A one-stop Desk Reference, for engineers involved in vehicle design and development; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the field. Material ranges from basic to advanced topics from engines and transmissions to vehicle dynamics and modelling.

* A hard-working Desk Reference, providing all the essential material needed by Automotive Engineers on a day-to-day basis.
* Fundamentals, key techniques, engineering best practice and rules-of-thumb together in one quick-reference sourcebook.
* Definitive content by the leading authors in the field.

A propos du livre

À propos des auteurs

Professor Ribbens received his B.S.E.E. degree in 1960, his M.S.E.E. degree in 1961, and his Ph.D. degree in 1965, all from the University of Michigan. From 1962-69, he was an assistant research engineer, associate research engineer, and research engineer. He was appointed assistant professor in 1969 and was promoted to associate professor in 1972 and professor in 1993. He was appointed professor of aerospace engineering in 1995. His research most recently has focused on electronic systems and devices that are applicable to all vehicles. His particular emphasis has been on engine control applications, mathematical models for drive-train systems, computer-assisted diagnostics for electronically controlled engines, and failure detection systems. His work in these areas has substantially advanced the art of automotive electronics, and he is recognized as a world leader in this area. He served on the Hitachi Science Board, a distinction given to few U.S. academics. He was also a visiting scientist at the Lawrence Livermore Laboratory, General Motors Technical Center, and the Technical University of Berlin.

Following 10 years with Richard Thomas and Baldwins Ltd. (now Corus) engaged mainly on research into sheet steel products destined for the automotive industry, a further 35 years was spent on materials technology focused on the car body. This included spells at The Pressed Steel Company, Austin-Morris, BL Technology, Rover and finally BMW UK. Experience included all aspects of material selection raging from sheet steel to aluminium and polymers together with a detailed knowlege of most processing aspects such as pressing, painting and welding. Corrosion prevention was a major feature of recent years and collaborative work with Oxford University helped optimise the use of zinc coated steels on current bodywork.

David Hoyle is an international management consultant with over 30 years' experience in quality management. He has held senior positions in quality management with British Aerospace and Ferranti International and worked with such companies as General Motors, the UK Civil Aviation Authority and Bell Atlantic on their quality improvement programmes. As well as delivering quality management and auditor training courses throughout the world, he has participated in various industry councils and committees, including the Institute of Quality Assurance.

A.J. (Tony) Martyr has been either the sole or a co-author of all editions of 'Engine Testing'. For the last 50 years he has held senior technical positions in companies, internationally involved in the design and testing of automotive and marine powertrains. His published works include a book on Project Management, and papers on subjects covering Dynamometry and the International Transfer of Technology.

1934 Born in Rotterdam, the Netherlands

1946-1951 Highschools in Rotterdam and Bandung (Indonesia)

1959 MSc. degree in Mechanical Engineering at TU-Delft

1966 Ph.D. degree at the Delft University of Technology

Thesis on the Wheel Shimmy Phenomenon

Advisers: Prof. De Pater and Prof. Van Eldik Thieme

!966-1996 Professor of Vehicle System Engineering

Delft University of Technology

1971 Visiting professor at HSRI (UMTRI), University of Michigan

!972-1989 Editor in Chief of journal Vehicle System Dynamics

1977-1989 Secretary General of the International Association for Vehicle System Dynamics (IAVSD)

!989 Honorary Doctorate

Stockholm Royal Institute of Technology

1993-2006 Consultant TNO-Automotive, The Netherlands

1994-2000 President of IAVSD

2002- 2012 Author of book (1st, 2nd,3d editions) 'Tire and Vehicle Dynamics'

Hans' areas of expertise include theoretical and experimental research on the dynamics of road vehicles and on the mechanical behaviour of pneumatic tires, and Bond graph modeling of dynamic systems.

Détails de l'édition

• Éditeur: Butterworth-Heinemann Ltd
• Date d'édition: 2009
• Langue: anglais
• ISBN 10: 1856175774
• ISBN 13: 9781856175777
• Reliure: Relié
• Nombre de pages: 834
• Éditeur: Crolla David
• Coordonnées du fabricant: non disponible
• Personne responsable: non disponible