The main aim of the study was to determine the optimum operating condition for the extraction of oil from mango seed kernel. For this, particle size, solvent type and extraction time with three levels for each factor were considered for optimization. A general factorial design was applied to investigate the effect of process variables on oil yield. Maximum oil yield of 84.81% was obtained for particle size range of 0.25mm - 0.5mm at extraction time of 6 hr and with solvent type hexane. Minimum oil yield of 18.88% was obtained for particle size range 1.5mm – 3mm at extraction time of 2 hr and with solvent type ethanol. ANOVA analysis was showed significant effect of the considered factors on oil yield (P value < 0.05). The physicochemical properties of the oil extracted under optimum condition were determined and compared to those of the commercial available mango kernel oil. It was found that the properties are within the standard except the acid value which is slightly higher. The result also indicated that there is a presence of high unsaponefiable matter (3.85%) and phenolic content (115mg/g) in the mango kernel oil which makes the oil suitable for cosmetics application.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
The main aim of the study was to determine the optimum operating condition for the extraction of oil from mango seed kernel. For this, particle size, solvent type and extraction time with three levels for each factor were considered for optimization. A general factorial design was applied to investigate the effect of process variables on oil yield. Maximum oil yield of 84.81% was obtained for particle size range of 0.25mm - 0.5mm at extraction time of 6 hr and with solvent type hexane. Minimum oil yield of 18.88% was obtained for particle size range 1.5mm – 3mm at extraction time of 2 hr and with solvent type ethanol. ANOVA analysis was showed significant effect of the considered factors on oil yield (P value < 0.05). The physicochemical properties of the oil extracted under optimum condition were determined and compared to those of the commercial available mango kernel oil. It was found that the properties are within the standard except the acid value which is slightly higher. The result also indicated that there is a presence of high unsaponefiable matter (3.85%) and phenolic content (115mg/g) in the mango kernel oil which makes the oil suitable for cosmetics application.
Mustefa Osman has Bsc in chemical engineering, Msc in process Engineering, lecturer in Adama science and technology university in chemical engineering department since 2015.
Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The main aim of the study was to determine the optimum operating condition for the extraction of oil from mango seed kernel. For this, particle size, solvent type and extraction time with three levels for each factor were considered for optimization. A general factorial design was applied to investigate the effect of process variables on oil yield. Maximum oil yield of 84.81% was obtained for particle size range of 0.25mm - 0.5mm at extraction time of 6 hr and with solvent type hexane. Minimum oil yield of 18.88% was obtained for particle size range 1.5mm - 3mm at extraction time of 2 hr and with solvent type ethanol. ANOVA analysis was showed significant effect of the considered factors on oil yield (P value 0.05). The physicochemical properties of the oil extracted under optimum condition were determined and compared to those of the commercial available mango kernel oil. It was found that the properties are within the standard except the acid value which is slightly higher. The result also indicated that there is a presence of high unsaponefiable matter (3.85%) and phenolic content (115mg/g) in the mango kernel oil which makes the oil suitable for cosmetics application. 100 pp. Englisch. N° de réf. du vendeur 9783330087699
Quantité disponible : 2 disponible(s)
Vendeur : moluna, Greven, Allemagne
Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Osman MustefaMustefa Osman has Bsc in chemical engineering, Msc in process Engineering, lecturer in Adama science and technology university in chemical engineering department since 2015.The main aim of the study was to determine . N° de réf. du vendeur 151237369
Quantité disponible : Plus de 20 disponibles
Vendeur : Revaluation Books, Exeter, Royaume-Uni
Paperback. Etat : Brand New. 100 pages. 8.66x5.91x0.23 inches. In Stock. N° de réf. du vendeur 3330087692
Quantité disponible : 1 disponible(s)
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Taschenbuch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -The main aim of the study was to determine the optimum operating condition for the extraction of oil from mango seed kernel. For this, particle size, solvent type and extraction time with three levels for each factor were considered for optimization. A general factorial design was applied to investigate the effect of process variables on oil yield. Maximum oil yield of 84.81% was obtained for particle size range of 0.25mm - 0.5mm at extraction time of 6 hr and with solvent type hexane. Minimum oil yield of 18.88% was obtained for particle size range 1.5mm - 3mm at extraction time of 2 hr and with solvent type ethanol. ANOVA analysis was showed significant effect of the considered factors on oil yield (P valueVDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 100 pp. Englisch. N° de réf. du vendeur 9783330087699
Quantité disponible : 1 disponible(s)
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Taschenbuch. Etat : Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The main aim of the study was to determine the optimum operating condition for the extraction of oil from mango seed kernel. For this, particle size, solvent type and extraction time with three levels for each factor were considered for optimization. A general factorial design was applied to investigate the effect of process variables on oil yield. Maximum oil yield of 84.81% was obtained for particle size range of 0.25mm - 0.5mm at extraction time of 6 hr and with solvent type hexane. Minimum oil yield of 18.88% was obtained for particle size range 1.5mm - 3mm at extraction time of 2 hr and with solvent type ethanol. ANOVA analysis was showed significant effect of the considered factors on oil yield (P value 0.05). The physicochemical properties of the oil extracted under optimum condition were determined and compared to those of the commercial available mango kernel oil. It was found that the properties are within the standard except the acid value which is slightly higher. The result also indicated that there is a presence of high unsaponefiable matter (3.85%) and phenolic content (115mg/g) in the mango kernel oil which makes the oil suitable for cosmetics application. N° de réf. du vendeur 9783330087699
Quantité disponible : 1 disponible(s)
Vendeur : preigu, Osnabrück, Allemagne
Taschenbuch. Etat : Neu. Extraction of oil from mango seed kernel for cosmetics application | Mustefa Osman (u. a.) | Taschenbuch | 100 S. | Englisch | 2017 | LAP LAMBERT Academic Publishing | EAN 9783330087699 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. N° de réf. du vendeur 109242304
Quantité disponible : 5 disponible(s)
Vendeur : Mispah books, Redhill, SURRE, Royaume-Uni
paperback. Etat : New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book. N° de réf. du vendeur ERICA82933300876926
Quantité disponible : 1 disponible(s)