Articles liés à Pressure Estimation During Internal Arc Test of Circuit...
Synopsis
Master's Thesis from the year 2013 in the subject Electrotechnology, grade: 1, Nirma University (Institute of technology), course: M.Tech, language: English, abstract: An internal arc test is not a mandatory test. It is a consumer premises test. It should be done on the terminal box, panel, enclosure, etc. Overpressure at internal arc, inside the penal, may be a danger for the worker working inside the field. compact substation in the public area must have to be arc proof. In this thesis report, in the beginning, the internal arc phenomena are discussed. Thereafter the internal arc test condition and their standards are given. In the middle part of the thesis, the analytical method is given and its failure is discussed and the limitation is of the old method is clearly shown with taking practical data at calculation data. The internal arc test is very expansive in the real working field and may danger sometimes because of loss of equipment during the test. although it is consumer selection to decide the level and location of the short circuit. It is always a risky test. In this thesis, the computer simulation method using Finite Volume Method (FVM) for simulation of the internal arc test with following all testing standards with selecting particular assembly is modeled. The electromagnetic and fluid combined analysis is presented to a detailed plasma arc. The MHD equation is derived and solved at the end using ANSYS software.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
À propos de l'auteur
Jigneshkumar Pramodbhai Desai holds a doctorate in electrical engineering from Gujarat Technological University (GTU), located in India. He has more than 9 years of experience as an assistant professor. He is currently working at U.V. Patel College of Engineering-Ganpat University, Mehsana as an Assistant Professor in the Electrical Engineering Department. He has so far had five research articles published in reputable, peer-reviewed, worldwide periodicals that are indexed by SCI/Scopus. More than four research publications were presented and published at prestigious international IEEE conferences. He has published 1 book chapter and 2 books with reputed publishers. He has filed one patent with the IPO. Some of his current research interests include power system protection, AI for power system protection, and machines for vehicles.
Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.
Résultats de recherche pour Pressure Estimation During Internal Arc Test of Circuit...
Image d'archives
Pressure Estimation During Internal Arc Test of Circuit Breaker
Vendeur : California Books, Miami, FL, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. N° de réf. du vendeur I-9783346580689
Acheter neuf
EUR 67,82
Livraison gratuite
Expédition nationale : Etats-Unis
Expédition nationale : Etats-Unis
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
Pressure Estimation During Internal Arc Test of Circuit Breaker
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - Master's Thesis from the year 2013 in the subject Electrotechnology, grade: 1, Nirma University (Institute of technology), course: M.Tech, language: English, abstract: An internal arc test is not a mandatory test. It is a consumer premises test. It should be done on the terminal box, panel, enclosure, etc. Overpressure at internal arc, inside the penal, may be a danger for the worker working inside the field. compact substation in the public area must have to be arc proof.In this thesis report, in the beginning, the internal arc phenomena are discussed. Thereafter the internal arc test condition and their standards are given.In the middle part of the thesis, the analytical method is given and its failure is discussed and the limitation is of the old method is clearly shown with taking practical data at calculation data.The internal arc test is very expansive in the real working field and may danger sometimes because of loss of equipment during the test. although it is consumer selection to decide the level and location of the short circuit. It is always a risky test.In this thesis, the computer simulation method using Finite Volume Method (FVM) for simulation of the internal arc test with following all testing standards with selecting particular assembly is modeled. The electromagnetic and fluid combined analysis is presented to a detailed plasma arc. The MHD equation is derived and solved at the end using ANSYS software. N° de réf. du vendeur 9783346580689
Acheter neuf
EUR 47,95
Expédition à EUR 35
Expédition depuis Allemagne vers Etats-Unis
Expédition depuis Allemagne vers Etats-Unis
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Pressure Estimation During Internal Arc Test of Circuit Breaker
impression à la demandeVendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -Master's Thesis from the year 2013 in the subject Electrotechnology, grade: 1, Nirma University (Institute of technology), course: M.Tech, language: English, abstract: An internal arc test is not a mandatory test. It is a consumer premises test. It should be done on the terminal box, panel, enclosure, etc. Overpressure at internal arc, inside the penal, may be a danger for the worker working inside the field. compact substation in the public area must have to be arc proof.In this thesis report, in the beginning, the internal arc phenomena are discussed. Thereafter the internal arc test condition and their standards are given.In the middle part of the thesis, the analytical method is given and its failure is discussed and the limitation is of the old method is clearly shown with taking practical data at calculation data.The internal arc test is very expansive in the real working field and may danger sometimes because of loss of equipment during the test. although it is consumer selection to decide the level and location of the short circuit. It is always a risky test.In this thesis, the computer simulation method using Finite Volume Method (FVM) for simulation of the internal arc test with following all testing standards with selecting particular assembly is modeled. The electromagnetic and fluid combined analysis is presented to a detailed plasma arc. The MHD equation is derived and solved at the end using ANSYS software.GRIN Publishing GmbH, Waltherstraße 23, 80337 München 92 pp. Englisch. N° de réf. du vendeur 9783346580689
Acheter neuf
EUR 47,95
Expédition à EUR 60
Expédition depuis Allemagne vers Etats-Unis
Expédition depuis Allemagne vers Etats-Unis
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Pressure Estimation During Internal Arc Test of Circuit Breaker
impression à la demandeVendeur : preigu, Osnabrück, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. Pressure Estimation During Internal Arc Test of Circuit Breaker | Jigneshkumar Desai | Taschenbuch | Englisch | 2022 | GRIN Verlag | EAN 9783346580689 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu Print on Demand. N° de réf. du vendeur 121291493
Acheter neuf
EUR 47,95
Expédition à EUR 70
Expédition depuis Allemagne vers Etats-Unis
Expédition depuis Allemagne vers Etats-Unis
Quantité disponible : 5 disponible(s)