Articles liés à Friction Stir Welding of Metal Matrix Composites: The...

Friction Stir Welding of Metal Matrix Composites: The Joining of Al 6061/SiC/17.5p Using Diamond Coated Tools - Couverture souple

Prater, Tracie

 
9783639103892: Friction Stir Welding of Metal Matrix Composites: The Joining of Al 6061/SiC/17.5p Using Diamond Coated Tools
Couverture souple
ISBN 10 : 3639103890 ISBN 13 : 9783639103892
Editeur : VDM Verlag Dr. Müller, 2009

Synopsis

Friction Stir Welding (FSW) is a solid-state joining process developed by TWI. The large axial forces associated with this process are typically cited as one of the major obstacles to its widespread application. The primary objective of this research is to quantify the reduction of axial force through use of diamond coatings of FSW tools. Results of welds for coated and uncoated tools on Al 6061 are compared. The goal is to produce friction stir welds using the diamond-coated tool that are comparable in quality to those performed using conventional tool materials, but with an appreciable reduction in tool wear and/or axial force. The secondary objective of this research is to parameterize FSW of Al 6061 reinforced with 17.5 percent SiC particles, a superabrasive composite material valued for its high strength to weight ratio. A range of acceptable process parameters for the joining of this material is established. Since tool wear is a limiting factor in the joining of composites, tool wear is periodically monitored and quantified using an optical comparator.

Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.

Présentation de l'éditeur

Friction Stir Welding (FSW) is a solid-state joining process developed by TWI. The large axial forces associated with this process are typically cited as one of the major obstacles to its widespread application. The primary objective of this research is to quantify the reduction of axial force through use of diamond coatings of FSW tools. Results of welds for coated and uncoated tools on Al 6061 are compared. The goal is to produce friction stir welds using the diamond-coated tool that are comparable in quality to those performed using conventional tool materials, but with an appreciable reduction in tool wear and/or axial force. The secondary objective of this research is to parameterize FSW of Al 6061 reinforced with 17.5 percent SiC particles, a superabrasive composite material valued for its high strength to weight ratio. A range of acceptable process parameters for the joining of this material is established. Since tool wear is a limiting factor in the joining of composites, tool wear is periodically monitored and quantified using an optical comparator.

Biographie de l'auteur

Tracie Prater is currently a Ph.D. student studying Mechanical Engineering at Vanderbilt University in Nashville, Tennessee. In 2008, she was awarded a NASA GSRP Fellowship to characterize tool wear in Friction Stir Welding of composite materials. She is also an alumni of the NASA Academy program.

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

Éditeur
VDM Verlag Dr. Müller
Date d'édition
2009
Langue
anglais
ISBN 10 
3639103890
ISBN 13 
9783639103892
Reliure
Broché
Nombre de pages
200
Coordonnées du fabricant
non disponible
Personne responsable
non disponible