Articles liés à Introduction to Modeling and Control of Internal Combustion...
Synopsis
Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved through control systems. Modeling and Control of Internal Combustion Engines (ICE) introductes readers to cost-effective model-based control system design for ICE. The primary emphasis is on ICE and their auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. Ideal for engineers and students interested in the design of classical and novel ICE control systems.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
Acheter neuf
Afficher cet article
EUR 128,41
EUR 9,70 expédition depuis Allemagne vers France
Destinations, frais et délaisAutres éditions populaires du même titre
Résultats de recherche pour Introduction to Modeling and Control of Internal Combustion...
Image d'archives
Introduction to Modeling and Control of Internal Combustion Engine Systems
Edité par
Springer (edition 2nd ed. 2010), 2009
ISBN 10 : 3642107745
ISBN 13 : 9783642107740
Ancien ou d'occasion
Couverture rigide
Vendeur : BooksRun, Philadelphia, PA, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Hardcover. Etat : Fair. 2nd ed. 2010. Ship within 24hrs. Satisfaction 100% guaranteed. APO/FPO addresses supported. N° de réf. du vendeur 3642107745-7-1
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Introduction to Modeling and Control of Internal Combustion Engine Systems
Edité par
Springer, 2009
ISBN 10 : 3642107745
ISBN 13 : 9783642107740
Ancien ou d'occasion
Couverture rigide
Vendeur : Solr Books, Lincolnwood, IL, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Etat : like_new. This book is in Like New condition. It appears to be NEW, but might have a minor defect. N° de réf. du vendeur BCV.3642107745.LN
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Introduction to Modeling and Control of Internal Combustion Engine Systems
Edité par
Springer Berlin Heidelberg, 2009
ISBN 10 : 3642107745
ISBN 13 : 9783642107740
Neuf
Couverture rigide
Vendeur : moluna, Greven, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Description of the mathematical modelling of the physical processes associated with Internal Combustion EnginesProvides the model-based controller design and optimization for novel motor technologiesInternal combustion engines (ICE) sti. N° de réf. du vendeur 5049343
Quantité disponible : Plus de 20 disponibles
Image d'archives
Introduction to Modeling and Control of Internal Combustion Engine Systems
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. In. N° de réf. du vendeur ria9783642107740_new
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
Introduction to Modeling and Control of Internal Combustion Engine Systems
Vendeur : GreatBookPricesUK, Woodford Green, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. N° de réf. du vendeur 7780795-n
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Introduction to Modeling and Control of Internal Combustion Engine Systems
Edité par
Springer-Verlag Gmbh Dez 2009, 2009
ISBN 10 : 3642107745
ISBN 13 : 9783642107740
Neuf
Couverture rigide
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Buch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects. 354 pp. Englisch. N° de réf. du vendeur 9783642107740
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Introduction to Modeling and Control of Internal Combustion Engine Systems
Edité par
Springer, Berlin, Springer Berlin Heidelberg, Springer, 2009
ISBN 10 : 3642107745
ISBN 13 : 9783642107740
Neuf
Couverture rigide
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Buch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects. N° de réf. du vendeur 9783642107740
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Introduction to Modeling and Control of Internal Combustion Engine Systems
Vendeur : GreatBookPrices, Columbia, MD, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. N° de réf. du vendeur 7780795-n
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Introduction to Modeling and Control of Internal Combustion Engine Systems
Edité par
Springer, 2009
ISBN 10 : 3642107745
ISBN 13 : 9783642107740
Ancien ou d'occasion
Couverture rigide
Vendeur : GreatBookPricesUK, Woodford Green, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : As New. Unread book in perfect condition. N° de réf. du vendeur 7780795
Quantité disponible : 1 disponible(s)
Image d'archives
Introduction to Modeling and Control of Internal Combustion Engine Systems
Edité par
Springer, 2009
ISBN 10 : 3642107745
ISBN 13 : 9783642107740
Ancien ou d'occasion
Couverture rigide
Vendeur : Mispah books, Redhill, SURRE, Royaume-Uni
Évaluation du vendeur 4 sur 5 étoiles
Hardcover. Etat : Like New. Like New. book. N° de réf. du vendeur ERICA77336421077456
Quantité disponible : 1 disponible(s)