Surface Modifications of Titanium: Titanium Dental Implants - Couverture souple

Chadalavada, Dharmendra; Bandi, Sarala Kumari; Kumar A., Surendra

 
9783659269349: Surface Modifications of Titanium: Titanium Dental Implants
Couverture souple
ISBN 10 : 3659269344 ISBN 13 : 9783659269349
Editeur : LAP LAMBERT Academic Publishing, 2012

Synopsis

Aim of the Study is to evaluate different methods of modification of titanium surface and to compare the surface roughness levels, surface wettability and surface configuration of variously treated surfaces of Titanium(commercially pure titanium grade I). The results of fibroblast culture revealed that the material is biocompatible, surface roughness measurements done with the help of surface profilometer and surface analyzer showed that samples blasted with 100 microns alumina and blasting with alumina followed by acid etching with 30% hydrochloric and sulfuric acid had the highest roughness average values (Ra). Contact angle measurement of all the samples revealed that samples treated with 5.0M of sodium hydroxide at 600°C for 1 hour,hydrofluoric acid and nitric acid followed by sodium hydroxide treatment, blasting with biphasic material and hydrofluoric acid treatment showed lowest contact angle and highest surface wettability. Scanning electron microscopic studies concluded that samples blasted with alumina, biphasic material, alumina blasting followed by acid etching revealed uniform rough configuration of the surface.

Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.

Présentation de l'éditeur

Aim of the Study is to evaluate different methods of modification of titanium surface and to compare the surface roughness levels, surface wettability and surface configuration of variously treated surfaces of Titanium(commercially pure titanium grade I). The results of fibroblast culture revealed that the material is biocompatible, surface roughness measurements done with the help of surface profilometer and surface analyzer showed that samples blasted with 100 microns alumina and blasting with alumina followed by acid etching with 30% hydrochloric and sulfuric acid had the highest roughness average values (Ra). Contact angle measurement of all the samples revealed that samples treated with 5.0M of sodium hydroxide at 600°C for 1 hour,hydrofluoric acid and nitric acid followed by sodium hydroxide treatment, blasting with biphasic material and hydrofluoric acid treatment showed lowest contact angle and highest surface wettability. Scanning electron microscopic studies concluded that samples blasted with alumina, biphasic material, alumina blasting followed by acid etching revealed uniform rough configuration of the surface.

Biographie de l'auteur

Dr.Dharmendra.Ch, M.D.S In Orthodontics. Studied Masters In Orthodontics From Meenakshi Ammal Dental College, Chennai.India. Professor In Orthodontics At Mallareddy Institute Of Dental Sciences, Hyderabad.India

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

Éditeur
LAP LAMBERT Academic Publishing
Date d'édition
2012
Langue
anglais
ISBN 10 
3659269344
ISBN 13 
9783659269349
Reliure
Broché
Nombre de pages
108
Coordonnées du fabricant
non disponible
Personne responsable
KreGa Onlinehandel GmbH
4950000000000
info@krega-onlinehandel.de

Birkenweg 31
Brakel
33034
Allemagne