Articles liés à Oscillatory Tillage Implement: An approach towards...

Oscillatory Tillage Implement: An approach towards low hp tractors - Couverture souple

Patange, Gajanan

 
9783659430053: Oscillatory Tillage Implement: An approach towards low hp tractors
Couverture souple
ISBN 10 : 3659430056 ISBN 13 : 9783659430053
Editeur : LAP LAMBERT Academic Publishing, 2013

Synopsis

Deep tillage in dry land is a draft intensive operation and on the other hand, draft requirement of multi-powered tools is lower than that of the passive tools of similar capacity. Hence it was proposed to investigate about an Oscillatory Tillage Implement for primary tillage which can be driven by its own eccentric drive in dry land. An Oscillatory Tillage Implement was developed and the tools were arranged in two rows and crank was located at the middle of the two rows of the tillage tools. The connecting rods were used to connect the crank and tillage tools. The crankshaft will be driven by an engine through a set of pulleys and v-belt. The eccentricity of 3 mm was kept at crankshaft to maintain the amplitude of 6mm at tillage tools. The frequency of the tillage tools was kept at 11 Hz. It was observed that MWD of soil aggregates for oscillatory mode was 19.79 mm which was smaller than that of non-oscillatory mode which was 37.20 mm that means smaller clods were formed with oscillatory mode. The soil inversion was better in case of oscillatory mode which is 75.9 percent as compared to non-oscillatory mode which was 63.69 percent.

Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.

Présentation de l'éditeur

Deep tillage in dry land is a draft intensive operation and on the other hand, draft requirement of multi-powered tools is lower than that of the passive tools of similar capacity. Hence it was proposed to investigate about an Oscillatory Tillage Implement for primary tillage which can be driven by its own eccentric drive in dry land. An Oscillatory Tillage Implement was developed and the tools were arranged in two rows and crank was located at the middle of the two rows of the tillage tools. The connecting rods were used to connect the crank and tillage tools. The crankshaft will be driven by an engine through a set of pulleys and v-belt. The eccentricity of 3 mm was kept at crankshaft to maintain the amplitude of 6mm at tillage tools. The frequency of the tillage tools was kept at 11 Hz. It was observed that MWD of soil aggregates for oscillatory mode was 19.79 mm which was smaller than that of non-oscillatory mode which was 37.20 mm that means smaller clods were formed with oscillatory mode. The soil inversion was better in case of oscillatory mode which is 75.9 percent as compared to non-oscillatory mode which was 63.69 percent.

Biographie de l'auteur

Currently working as a Research Associate at Farm Machinery Testing and Training Center, Maharashtra, India. He completed his M.Tech. (Farm Machinery and Power) from Indian Institute of Technology (IIT), Kharagpur India in 2011 and B.Tech. (Agril. Engg.) from Marathwada Agricultural University, Parbhani, India in 2009.

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

Éditeur
LAP LAMBERT Academic Publishing
Date d'édition
2013
Langue
anglais
ISBN 10 
3659430056
ISBN 13 
9783659430053
Reliure
Broché
Nombre de pages
64
Coordonnées du fabricant
non disponible
Personne responsable
KreGa Onlinehandel GmbH
4950000000000
info@krega-onlinehandel.de

Birkenweg 31
Brakel
33034
Allemagne