Articles liés à Flow Simulation (CFD) & Fatigue Analysis (FEA)...
Synopsis
In this book the CFD analysis of a centrifugal pump is done using k-ε turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
Présentation de l'éditeur
In this book the CFD analysis of a centrifugal pump is done using k-ε turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump
Biographie de l'auteur
Manish Dadhich was born in Sri Ganganagar (Rajasthan,India). He completed his B.Tech (Honors) in Mechanical engineering from Rajasthan Technical University, Kota in year 2010 and M.Tech(Honors) in Thermal engineering from Rajasthan Technical University, Kota in year 2013.His area of research is CFD and FEA analysis.
Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.
Acheter neuf
Afficher cet article
EUR 45,45
EUR 9,70 expédition depuis Allemagne vers France
Destinations, frais et délaisRésultats de recherche pour Flow Simulation (CFD) & Fatigue Analysis (FEA)...
Image fournie par le vendeur
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Edité par
LAP LAMBERT Academic Publishing, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
Couverture souple
Vendeur : moluna, Greven, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Dadhich ManishManish Dadhich was born in Sri Ganganagar (Rajasthan,India). He completed his B.Tech (Honors) in Mechanical engineering from Rajasthan Technical University, Kota in year 2010 and M.Tech(Honors) in Thermal engineering fr. N° de réf. du vendeur 5168203
Quantité disponible : Plus de 20 disponibles
Image d'archives
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Edité par
LAP LAMBERT Academic Publishing, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
Couverture souple
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. In. N° de réf. du vendeur ria9783659611056_new
Quantité disponible : Plus de 20 disponibles
Image d'archives
Flow Simulation CFD Fatigue Analysis FEA of a Centrifugal Pump
Edité par
LAP LAMBERT Academic Publishing, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
PAP
Vendeur : PBShop.store US, Wood Dale, IL, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
PAP. Etat : New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. N° de réf. du vendeur L0-9783659611056
Quantité disponible : Plus de 20 disponibles
Image d'archives
Flow Simulation CFD Fatigue Analysis FEA of a Centrifugal Pump
Edité par
LAP LAMBERT Academic Publishing, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
PAP
Vendeur : PBShop.store UK, Fairford, GLOS, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
PAP. Etat : New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. N° de réf. du vendeur L0-9783659611056
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Edité par
LAP LAMBERT Academic Publishing, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
Taschenbuch
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this book the CFD analysis of a centrifugal pump is done using k- turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump. N° de réf. du vendeur 9783659611056
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Edité par
LAP LAMBERT Academic Publishing Sep 2014, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
Taschenbuch
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this book the CFD analysis of a centrifugal pump is done using k- turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump 120 pp. Englisch. N° de réf. du vendeur 9783659611056
Quantité disponible : 2 disponible(s)
Image fournie par le vendeur
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Edité par
LAP LAMBERT Academic Publishing Sep 2014, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
Taschenbuch
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. Neuware -In this book the CFD analysis of a centrifugal pump is done using k-¿ turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pumpBooks on Demand GmbH, Überseering 33, 22297 Hamburg 120 pp. Englisch. N° de réf. du vendeur 9783659611056
Quantité disponible : 2 disponible(s)
Image d'archives
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a.
Edité par
LAP LAMBERT Academic Publishing, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
Couverture souple
Vendeur : Books Puddle, New York, NY, Etats-Unis
Évaluation du vendeur 4 sur 5 étoiles
Etat : New. N° de réf. du vendeur 26359068591
Quantité disponible : 4 disponible(s)
Image d'archives
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a.
Edité par
LAP LAMBERT Academic Publishing, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
Couverture souple
Vendeur : Majestic Books, Hounslow, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. Print on Demand. N° de réf. du vendeur 353455216
Quantité disponible : 4 disponible(s)
Image d'archives
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a.
Edité par
LAP LAMBERT Academic Publishing, 2014
ISBN 10 : 3659611050
ISBN 13 : 9783659611056
Neuf
Couverture souple
Vendeur : Biblios, Frankfurt am main, HESSE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. PRINT ON DEMAND. N° de réf. du vendeur 18359068581
Quantité disponible : 4 disponible(s)