Raspberry Pi Pico W: Program, build, and master 60+ projects with the Wireless RP2040 - Couverture souple

Ibrahim, Dogan

 
9783895765292: Raspberry Pi Pico W: Program, build, and master 60+ projects with the Wireless RP2040
Couverture souple
ISBN 10 : 3895765295 ISBN 13 : 9783895765292
Editeur : Elektor International Media BV, 2022

Synopsis

The Raspberry Pi Pico and Pico W are based on the fast, efficient, and low-cost dual-core ARM Cortex M0+ RP2040 microcontroller chip running at up to 133 MHz and sporting 264 KB of SRAM and 2 MB of Flash memory. Besides spacious memory, the Pico and Pico W offer many GPIO pins, and popular peripheral interface modules like ADC, SPI, I²C, UART, PWM, timing modules, a hardware debug interface, and an internal temperature sensor.
The Raspberry Pi Pico W additionally includes an on-board Infineon CYW43439 Bluetooth and Wi-Fi chipset. At the time of writing this book, the Bluetooth firmware was not yet available. Wi-Fi is however fully supported at 2.4 GHz using the 802.11b/g/n protocols.
This book is an introduction to using the Raspberry Pi Pico W in conjunction with the MicroPython programming language. The Thonny development environment (IDE) is used in all of the 60+ working and tested projects covering the following topics:



- Installing the MicroPython on Raspberry Pi Pico using a Raspberry Pi or a PC


- Timer interrupts and external interrupts


- Analogue-to-digital converter (ADC) projects


- Using the internal temperature sensor and external sensor chips


- Using the internal temperature sensor and external temperature sensor chips


- Datalogging projects


- PWM, UART, I²C, and SPI projects


- Using Bluetooth, WiFi, and apps to communicate with smartphones


- Digital-to-analogue converter (DAC) projects





All projects are tried & tested. They can be implemented on both the Raspberry Pi Pico and Raspberry Pi Pico W, although the Wi-Fi-based subjects will run on the Pico W only. Basic programming and electronics experience are required to follow the projects. Brief descriptions, block diagrams, detailed circuit diagrams, and full MicroPython program listings are given for all projects. The full program listings of all the projects discussed in the book may be downloaded free of charge from www.elektor.com/20335.

Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.

À propos de la quatrième de couverture

The Raspberry Pi Pico and Pico W are based on the fast, efficient, and low-cost dual-core ARM Cortex M0+ RP2040 microcontroller chip running at up to 133 MHz and sporting 264 KB of SRAM and 2 MB of Flash memory. Besides spacious memory, the Pico and Pico W offer many GPIO pins, and popular peripheral interface modules like ADC, SPI, I²C, UART, PWM, timing modules, a hardware debug interface, and an internal temperature sensor.
The Raspberry Pi Pico W additionally includes an on-board Infineon CYW43439 Bluetooth and Wi-Fi chipset. At the time of writing this book, the Bluetooth firmware was not yet available. Wi-Fi is however fully supported at 2.4 GHz using the 802.11b/g/n protocols.
This book is an introduction to using the Raspberry Pi Pico W in conjunction with the MicroPython programming language. The Thonny development environment (IDE) is used in all of the 60+ working and tested projects covering the following topics:



- Installing the MicroPython on Raspberry Pi Pico using a Raspberry Pi or a PC


- Timer interrupts and external interrupts


- Analogue-to-digital converter (ADC) projects


- Using the internal temperature sensor and external sensor chips


- Using the internal temperature sensor and external temperature sensor chips


- Datalogging projects


- PWM, UART, I²C, and SPI projects


- Using Bluetooth, WiFi, and apps to communicate with smartphones


- Digital-to-analogue converter (DAC) projects





All projects are tried & tested. They can be implemented on both the Raspberry Pi Pico and Raspberry Pi Pico W, although the Wi-Fi-based subjects will run on the Pico W only. Basic programming and electronics experience are required to follow the projects. Brief descriptions, block diagrams, detailed circuit diagrams, and full MicroPython program listings are given for all projects. The full program listings of all the projects discussed in the book may be downloaded free of charge from www.elektor.com/20335.

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

Éditeur
Elektor International Media BV
Date d'édition
2022
Langue
anglais
ISBN 10 
3895765295
ISBN 13 
9783895765292
Reliure
Broché
Numéro d'édition
1
Nombre de pages
309
Coordonnées du fabricant
info@elektor.de
info@elektor.de

Lukasstraße 1
Aachen
52070
Allemagne