Articles liés à Studies on Different Steels Welded by TIG and MIG Welding...
Synopsis
This study presents the comparison of microstructure and mechanical properties of SS-316 Stainless steel and SA-2062 alloys welded by TIG and MIG welding processes. Microstructures of base metal and weld metal were studied with SEM and EDAX software. Mechanical properties like tensile strength and micro hardness have also been evaluated. During research work it is investigated that the average tensile strength of weld joint with TIG welding is comparatively less than that of joint with MIG welding. Micro hardness of TIG welding is relatively more than that of MIG welding. The minimum HAZ is found directly proportional to maximum tensile strength. More coarse dimples are seen in TIG joints as compared to MIG joints. The dimple size exhibits a directly proportional relationship with strength and ductility, i.e. if the dimple size is finer, then the strength and ductility of the respective joint will be higher and vice versa. The higher hardness at weld interface may be due to enrichment of this zone with FE, Ni, and Cr and subsequent formation.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
À propos de l'auteur
Dr. Gurbhinder Singh is renowned academician having more than 15 years experience in teaching and research. He did his doctorate from Indian Institute of Technology, Roorkee . He has served various institutes at different teaching positions. Currently he is serving in Guru Kashi University, Talwandi Sabo, Punjab as Professor and Dean Engineering.
Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.
Résultats de recherche pour Studies on Different Steels Welded by TIG and MIG Welding...
Image fournie par le vendeur
Studies on Different Steels Welded by TIG and MIG Welding Processes
Edité par
LAP LAMBERT Academic Publishing Jan 2018, 2018
ISBN 10 : 6134985988
ISBN 13 : 9786134985987
Neuf
Taschenbuch
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This study presents the comparison of microstructure and mechanical properties of SS-316 Stainless steel and SA-2062 alloys welded by TIG and MIG welding processes. Microstructures of base metal and weld metal were studied with SEM and EDAX software. Mechanical properties like tensile strength and micro hardness have also been evaluated. During research work it is investigated that the average tensile strength of weld joint with TIG welding is comparatively less than that of joint with MIG welding. Micro hardness of TIG welding is relatively more than that of MIG welding. The minimum HAZ is found directly proportional to maximum tensile strength. More coarse dimples are seen in TIG joints as compared to MIG joints. The dimple size exhibits a directly proportional relationship with strength and ductility, i.e. if the dimple size is finer, then the strength and ductility of the respective joint will be higher and vice versa. The higher hardness at weld interface may be due to enrichment of this zone with FE, Ni, and Cr and subsequent formation. 52 pp. Englisch. N° de réf. du vendeur 9786134985987
Acheter neuf
EUR 35,90
Expédition à EUR 23
Expédition depuis Allemagne vers Etats-Unis
Expédition depuis Allemagne vers Etats-Unis
Quantité disponible : 2 disponible(s)
Image d'archives
Studies on Different Steels Welded by TIG and MIG Welding Processes
Edité par
LAP LAMBERT Academic Publishing, 2018
ISBN 10 : 6134985988
ISBN 13 : 9786134985987
Neuf
Paperback
Vendeur : Revaluation Books, Exeter, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Paperback. Etat : Brand New. 52 pages. 8.66x5.91x0.12 inches. In Stock. N° de réf. du vendeur zk6134985988
Acheter neuf
EUR 64,21
Expédition à EUR 11,66
Expédition depuis Royaume-Uni vers Etats-Unis
Expédition depuis Royaume-Uni vers Etats-Unis
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Studies on Different Steels Welded by TIG and MIG Welding Processes
Edité par
LAP LAMBERT Academic Publishing, 2018
ISBN 10 : 6134985988
ISBN 13 : 9786134985987
Neuf
Couverture souple
Vendeur : moluna, Greven, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Singh GurbhinderDr. Gurbhinder Singh is renowned academician having more than 15 years experience in teaching and research. He did his doctorate from Indian Institute of Technology, Roorkee . He has served various institutes at diffe. N° de réf. du vendeur 385844188
Acheter neuf
EUR 31,27
Expédition à EUR 48,99
Expédition depuis Allemagne vers Etats-Unis
Expédition depuis Allemagne vers Etats-Unis
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
Studies on Different Steels Welded by TIG and MIG Welding Processes
Edité par
LAP LAMBERT Academic Publishing, 2018
ISBN 10 : 6134985988
ISBN 13 : 9786134985987
Neuf
Taschenbuch
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This study presents the comparison of microstructure and mechanical properties of SS-316 Stainless steel and SA-2062 alloys welded by TIG and MIG welding processes. Microstructures of base metal and weld metal were studied with SEM and EDAX software. Mechanical properties like tensile strength and micro hardness have also been evaluated. During research work it is investigated that the average tensile strength of weld joint with TIG welding is comparatively less than that of joint with MIG welding. Micro hardness of TIG welding is relatively more than that of MIG welding. The minimum HAZ is found directly proportional to maximum tensile strength. More coarse dimples are seen in TIG joints as compared to MIG joints. The dimple size exhibits a directly proportional relationship with strength and ductility, i.e. if the dimple size is finer, then the strength and ductility of the respective joint will be higher and vice versa. The higher hardness at weld interface may be due to enrichment of this zone with FE, Ni, and Cr and subsequent formation. N° de réf. du vendeur 9786134985987
Acheter neuf
EUR 53,13
Expédition à EUR 30,50
Expédition depuis Allemagne vers Etats-Unis
Expédition depuis Allemagne vers Etats-Unis
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Studies on Different Steels Welded by TIG and MIG Welding Processes
Edité par
LAP LAMBERT Academic Publishing Jan 2018, 2018
ISBN 10 : 6134985988
ISBN 13 : 9786134985987
Neuf
Taschenbuch
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -This study presents the comparison of microstructure and mechanical properties of SS-316 Stainless steel and SA-2062 alloys welded by TIG and MIG welding processes. Microstructures of base metal and weld metal were studied with SEM and EDAX software. Mechanical properties like tensile strength and micro hardness have also been evaluated. During research work it is investigated that the average tensile strength of weld joint with TIG welding is comparatively less than that of joint with MIG welding. Micro hardness of TIG welding is relatively more than that of MIG welding. The minimum HAZ is found directly proportional to maximum tensile strength. More coarse dimples are seen in TIG joints as compared to MIG joints. The dimple size exhibits a directly proportional relationship with strength and ductility, i.e. if the dimple size is finer, then the strength and ductility of the respective joint will be higher and vice versa. The higher hardness at weld interface may be due to enrichment of this zone with FE, Ni, and Cr and subsequent formation.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 52 pp. Englisch. N° de réf. du vendeur 9786134985987
Acheter neuf
EUR 35,90
Expédition à EUR 60
Expédition depuis Allemagne vers Etats-Unis
Expédition depuis Allemagne vers Etats-Unis
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Studies on Different Steels Welded by TIG and MIG Welding Processes
Edité par
LAP LAMBERT Academic Publishing, 2018
ISBN 10 : 6134985988
ISBN 13 : 9786134985987
Neuf
Taschenbuch
Vendeur : preigu, Osnabrück, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. Studies on Different Steels Welded by TIG and MIG Welding Processes | Gurbhinder Singh (u. a.) | Taschenbuch | 52 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9786134985987 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. N° de réf. du vendeur 111268738
Acheter neuf
EUR 33,30
Expédition à EUR 70
Expédition depuis Allemagne vers Etats-Unis
Expédition depuis Allemagne vers Etats-Unis
Quantité disponible : 5 disponible(s)