Calculation Methods Applied in the Design of Reinforced Concrete Beams - Couverture souple

Castanheira Rodrigues, Edson Fernando; Christoforo, André Luis; Hallak Panzera, Tulio

 
9786200080844: Calculation Methods Applied in the Design of Reinforced Concrete Beams
Couverture souple
ISBN 10 : 6200080844 ISBN 13 : 9786200080844
Editeur : LAP LAMBERT Academic Publishing, 2019

Synopsis

This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it’s not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam.

Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.

Présentation de l'éditeur

This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it’s not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam.

Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.

Éditeur
LAP LAMBERT Academic Publishing
Date d'édition
2019
Langue
anglais
ISBN 10 
6200080844
ISBN 13 
9786200080844
Reliure
Broché
Nombre de pages
56
Coordonnées du fabricant
non disponible
Personne responsable
KreGa Onlinehandel GmbH
4950000000000
info@krega-onlinehandel.de

Birkenweg 31
Brakel
33034
Allemagne