Articles liés à Fabrication and Optimization of 3D Printed Biomaterials
Synopsis
This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
Acheter neuf
Afficher cet article
EUR 34,25
EUR 9,70 expédition depuis Allemagne vers France
Destinations, frais et délaisRésultats de recherche pour Fabrication and Optimization of 3D Printed Biomaterials
Image fournie par le vendeur
Fabrication and Optimization of 3D Printed Biomaterials
Edité par
LAP LAMBERT Academic Publishing, 2021
ISBN 10 : 620392718X
ISBN 13 : 9786203927184
Neuf
Couverture souple
Vendeur : moluna, Greven, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. N° de réf. du vendeur 490936235
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
Fabrication and Optimization of 3D Printed Biomaterials
Edité par
LAP LAMBERT Academic Publishing Jun 2021, 2021
ISBN 10 : 620392718X
ISBN 13 : 9786203927184
Neuf
Taschenbuch
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples. 64 pp. Englisch. N° de réf. du vendeur 9786203927184
Quantité disponible : 2 disponible(s)
Image fournie par le vendeur
Fabrication and Optimization of 3D Printed Biomaterials
Edité par
LAP LAMBERT Academic Publishing, 2021
ISBN 10 : 620392718X
ISBN 13 : 9786203927184
Neuf
Taschenbuch
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples. N° de réf. du vendeur 9786203927184
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Fabrication and Optimization of 3D Printed Biomaterials
Edité par
LAP LAMBERT Academic Publishing Jun 2021, 2021
ISBN 10 : 620392718X
ISBN 13 : 9786203927184
Neuf
Taschenbuch
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. Neuware -This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples.Books on Demand GmbH, Überseering 33, 22297 Hamburg 64 pp. Englisch. N° de réf. du vendeur 9786203927184
Quantité disponible : 2 disponible(s)