Articles liés à The Modelling and Analysis of the Mechanics of Ropes
Synopsis
This book examines the modelling and analysis of the many types of ropes, linear fibre assemblies, with a focus on load extension behaviour. All the modelling is based on the Principle of Virtual Work and admissible modes of deformation.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
À propos de l?auteur
The author graduated in aeronautical engineering from the Imperial College, London, and spent ten years with the Canadian Defence Research Board (DRB) working on various aspects of hypersonic dynamics and high speed impact. In this time he also studied at Toronto University for a MEng and PhD, sponsored by the DRB. He then went to Bristol University to work on the dynamics and aerodynamics of containers suspended below helicopters.
The next position was at UMIST (University of Manchester Institute of Science and Technology) as a lecturer and then as reader; at UMIST he was initially involved with impact dynamics, applied to nets and body armour. This developed into liaison and collaboration with the Textile Department at UMIST and involvement into cable dynamics and ultimately ropes. He was awarded the DSc. (Applied Mechanics) by Imperial College.
He was one of the directors involved in forming the company TTI (Tension Technology International Limited), and as a consultant was instrumental in undertaking various contracts in the modelling and assessment of rope mechanics and behaviour. He has since retired from UMIST and from TTI as a director but is still active as a consultant.
Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.
- ÉditeurSpringer
- Date d'édition2013
- ISBN 10 9400778406
- ISBN 13 9789400778405
- ReliureRelié
- Langueanglais
- Nombre de pages136
- Coordonnées du fabricantnon disponible
Acheter neuf
Afficher cet article
EUR 92,27
EUR 9,70 expédition depuis Allemagne vers France
Destinations, frais et délais
Résultats de recherche pour The Modelling and Analysis of the Mechanics of Ropes
Image d'archives
The Modelling and Analysis of the Mechanics of Ropes
Edité par
Springer Netherlands, 2013
ISBN 10 : 9400778406
ISBN 13 : 9789400778405
Ancien ou d'occasion
Couverture rigide
Vendeur : Buchpark, Trebbin, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : Sehr gut. Zustand: Sehr gut | Seiten: 136 | Sprache: Englisch | Produktart: Bücher. N° de réf. du vendeur 24200728/12
Quantité disponible : 1 disponible(s)
Image d'archives
The Modelling and Analysis of the Mechanics of Ropes
Edité par
Springer Netherlands, 2013
ISBN 10 : 9400778406
ISBN 13 : 9789400778405
Ancien ou d'occasion
Couverture rigide
Vendeur : Buchpark, Trebbin, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : Sehr gut. Zustand: Sehr gut | Seiten: 136 | Sprache: Englisch | Produktart: Bücher. N° de réf. du vendeur 24200728/2
Quantité disponible : 4 disponible(s)
Image fournie par le vendeur
The Modelling and Analysis of the Mechanics of Ropes
Edité par
Springer Netherlands, 2013
ISBN 10 : 9400778406
ISBN 13 : 9789400778405
Neuf
Couverture rigide
Vendeur : moluna, Greven, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Gebunden. Etat : New. N° de réf. du vendeur 5828115
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
The Modelling and Analysis of the Mechanics of Ropes
Edité par
Springer Netherlands Dez 2013, 2013
ISBN 10 : 9400778406
ISBN 13 : 9789400778405
Neuf
Couverture rigide
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Buch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book considers the modelling and analysis of the many types of ropes, linear fibre assemblies. The construction of these structures is very diverse and in the work these are considered from the modelling point of view. As well as the conventional twisted structures, braid and plaited structures and parallel assemblies are modelled and analysed, first for their assembly and secondly for their mechanical behaviour. Also since the components are assemblies of components, fibres into yarns, into strands, and into ropes the hierarchical nature of the construction is considered.The focus of the modelling is essentially toward load extension behaviour but there is reference to bending of ropes, encompassed by the two extremes, no slip between the components and zero friction resistance to component slip. Friction in ropes is considered both between the rope components, sliding, sawing and scissoring, and within the components, dilation and distortion, these latter modes being used to model component set, the phenomenon instrumental in rope proofing. The exploitation of the modelling is closed by the suggested modelling and analysis of component wear and life limitation and also of rope steady state heating. These will require extensive experimentation to extract the necessary coefficients, achievable by parallel testing of prototypes and similar structures.This development is focused on the modelling and analysis of ropes and other similar structures. All the modelling is based on the Principle of Virtual Work and admissible modes of deformation. Finally this book is directed towards the various industries involved in design, manufacture and use of ropes, stays and other similar structures. 136 pp. Englisch. N° de réf. du vendeur 9789400778405
Quantité disponible : 2 disponible(s)
Image fournie par le vendeur
The Modelling and Analysis of the Mechanics of Ropes
Edité par
Springer Netherlands, Springer Netherlands, 2013
ISBN 10 : 9400778406
ISBN 13 : 9789400778405
Neuf
Couverture rigide
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Buch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This book considers the modelling and analysis of the many types of ropes, linear fibre assemblies. The construction of these structures is very diverse and in the work these are considered from the modelling point of view. As well as the conventional twisted structures, braid and plaited structures and parallel assemblies are modelled and analysed, first for their assembly and secondly for their mechanical behaviour. Also since the components are assemblies of components, fibres into yarns, into strands, and into ropes the hierarchical nature of the construction is considered.The focus of the modelling is essentially toward load extension behaviour but there is reference to bending of ropes, encompassed by the two extremes, no slip between the components and zero friction resistance to component slip. Friction in ropes is considered both between the rope components, sliding, sawing and scissoring, and within the components, dilation and distortion, these latter modes being used to model component set, the phenomenon instrumental in rope proofing. The exploitation of the modelling is closed by the suggested modelling and analysis of component wear and life limitation and also of rope steady state heating. These will require extensive experimentation to extract the necessary coefficients, achievable by parallel testing of prototypes and similar structures.This development is focused on the modelling and analysis of ropes and other similar structures. All the modelling is based on the Principle of Virtual Work and admissible modes of deformation. Finally this book is directed towards the various industries involved in design, manufacture and use of ropes, stays and other similar structures. N° de réf. du vendeur 9789400778405
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
The Modelling and Analysis of the Mechanics of Ropes
Edité par
Springer Netherlands, Springer Netherlands Dez 2013, 2013
ISBN 10 : 9400778406
ISBN 13 : 9789400778405
Neuf
Couverture rigide
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Buch. Etat : Neu. Neuware -This book considers the modelling and analysis of the many types of ropes, linear fibre assemblies. The construction of these structures is very diverse and in the work these are considered from the modelling point of view. As well as the conventional twisted structures, braid and plaited structures and parallel assemblies are modelled and analysed, first for their assembly and secondly for their mechanical behaviour. Also since the components are assemblies of components, fibres into yarns, into strands, and into ropes the hierarchical nature of the construction is considered.The focus of the modelling is essentially toward load extension behaviour but there is reference to bending of ropes, encompassed by the two extremes, no slip between the components and zero friction resistance to component slip. Friction in ropes is considered both between the rope components, sliding, sawing and scissoring, and within the components, dilation and distortion, these latter modes being used to model component set, the phenomenon instrumental in rope proofing. The exploitation of the modelling is closed by the suggested modelling and analysis of component wear and life limitation and also of rope steady state heating. These will require extensive experimentation to extract the necessary coefficients, achievable by parallel testing of prototypes and similar structures.This development is focused on the modelling and analysis of ropes and other similar structures. All the modelling is based on the Principle of Virtual Work and admissible modes of deformation. Finally this book is directed towards the various industries involved in design, manufacture anduse of ropes, stays and other similar structures.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 136 pp. Englisch. N° de réf. du vendeur 9789400778405
Quantité disponible : 2 disponible(s)
Image d'archives
The Modelling and Analysis of the Mechanics of Ropes (Solid Mechanics and Its Applications, 209)
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. In. N° de réf. du vendeur ria9789400778405_new
Quantité disponible : Plus de 20 disponibles
Image d'archives
The Modelling and Analysis of the Mechanics of Ropes (Solid Mechanics and Its Applications, 209)
Vendeur : California Books, Miami, FL, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. N° de réf. du vendeur I-9789400778405
Quantité disponible : Plus de 20 disponibles
Image d'archives
The Modelling and Analysis of the Mechanics of Ropes
Vendeur : Revaluation Books, Exeter, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Hardcover. Etat : Brand New. 2014 edition. 150 pages. 9.25x6.25x0.50 inches. In Stock. N° de réf. du vendeur x-9400778406
Quantité disponible : 2 disponible(s)
Image d'archives
The Modelling and Analysis of the Mechanics of Ropes (Solid Mechanics and Its Applications, 209)
Vendeur : Lucky's Textbooks, Dallas, TX, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. N° de réf. du vendeur ABLIING23Apr0412070051545
Quantité disponible : Plus de 20 disponibles