Articles liés à The Behavior of Thin Walled Structures: Beams, Plates,...
Synopsis
This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
À propos de l?auteur
Dr. Vinson is the H. Fletcher Brown Professor of Mechanical and Aerospace Engineering at the University of Delaware. In 1977 he received the ONR-AIAA Structural Mechanics Award for his research in composite materials, and in 1981 he was awarded an ASME Centennial Award. He is active as a consultant to government and industry. He recently received a Fellowship from the Japan Society for the Promotion of Science for 1985. He has been Chairman of the American Organizing Committee for the Japan-United States Conferences on Composite Materials three times (1981, 1983 and 1986).
Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.
Acheter neuf
Afficher cet article
EUR 92,27
EUR 9,70 expédition depuis Allemagne vers France
Destinations, frais et délaisAutres éditions populaires du même titre
Résultats de recherche pour The Behavior of Thin Walled Structures: Beams, Plates,...
Image fournie par le vendeur
The Behavior of Thin Walled Structures: Beams, Plates, and Shells
Edité par
Springer Netherlands, 2011
ISBN 10 : 9401077479
ISBN 13 : 9789401077477
Neuf
Couverture souple
Vendeur : moluna, Greven, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Dr. Vinson is the H. Fletcher Brown Professor of Mechanical and Aerospace Engineering at the University of Delaware. In 1977 he received the ONR-AIAA Structural Mechanics Award for his research in composite materials, and in 1981 he was awarded an . N° de réf. du vendeur 5834331
Quantité disponible : Plus de 20 disponibles
Image d'archives
The Behavior of Thin Walled Structures: Beams, Plates, and Shells (Mechanics of Surface Structure)
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. In. N° de réf. du vendeur ria9789401077477_new
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
The Behavior of Thin Walled Structures: Beams, Plates, and Shells
Edité par
Springer Netherlands, Springer Netherlands Sep 2011, 2011
ISBN 10 : 9401077479
ISBN 13 : 9789401077477
Neuf
Taschenbuch
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 200 pp. Englisch. N° de réf. du vendeur 9789401077477
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
The Behavior of Thin Walled Structures: Beams, Plates, and Shells
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood. N° de réf. du vendeur 9789401077477
Quantité disponible : 1 disponible(s)
Image d'archives
The Behavior of Thin Walled Structures: Beams, Plates, and Shells
Vendeur : Revaluation Books, Exeter, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Paperback. Etat : Brand New. 1989 edition. 200 pages. 9.25x6.10x0.46 inches. In Stock. N° de réf. du vendeur x-9401077479
Quantité disponible : 2 disponible(s)
Image fournie par le vendeur
The Behavior of Thin Walled Structures: Beams, Plates, and Shells
Edité par
Springer Netherlands Sep 2011, 2011
ISBN 10 : 9401077479
ISBN 13 : 9789401077477
Neuf
Taschenbuch
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood. 200 pp. Englisch. N° de réf. du vendeur 9789401077477
Quantité disponible : 2 disponible(s)
Image d'archives
The Behavior of Thin Walled Structures: Beams, Plates, and Shells (Mechanics of Surface Structure (8))
Edité par
Springer, 2011
ISBN 10 : 9401077479
ISBN 13 : 9789401077477
Ancien ou d'occasion
Paperback
Vendeur : Mispah books, Redhill, SURRE, Royaume-Uni
Évaluation du vendeur 4 sur 5 étoiles
Paperback. Etat : Like New. Like New. book. N° de réf. du vendeur ERICA77394010774796
Quantité disponible : 1 disponible(s)