Introduction.- Discrete-Time Sliding Mode Control.- Discrete-Time Periodic Adaptive Control.- Discrete-Time Adaptive Posicast Control.- Discrete-Time Iterative Learning Control.- Discrete-Time Fuzzy PID Control.- Benchmark Precision Control of a Piezo-Motor Driven Linear Stage.- Advanced Control for Practical Engineering Applications.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
Professor Jian-Xin Xu received the Bachelor degree from Zhejiang University, China in 1982. He attended the University of Tokyo, Japan, where he received Master's and PhD degrees in 1986 and 1989 respectively. All degrees are in Electrical Engineering. He worked for one year in the Hitachi research Laboratory, Japan; for more than one year in Ohio State University, U.S.A. as a Visiting Scholar; and for 6 months in Yale University as a Visiting Research Fellow. In 1991 Professor Xu joined the National University of Singapore and is currently a professor at Department of Electrical and Computer Engineering. His research interests lie in the fields of intelligent and robust control and applications to motion control, mechatronics, and robotics. He is a Fellow of IEEE.
Up to now he produced more than 500 peer-reviewed journal and conference papers, 2 monographs and 3 edited books. He has been supervising/co-supervising 29 PhD, 20 Master students, and 15 research staff including postdoctoral fellows and research fellows. He has completed 20 funded research projects and currently he work on AUV biomimetic locomotion and control.
Dr Khalid Abidi received his BSc. degree in Mechanical Engineering from the Middle East Technical University, Ankara, Turkey in 2002 and the MSc. degree in Electrical Engineering and Computer Science from Sabanci University, Istanbul, Turkey in 2004. He obtained his PhD degree in Electrical and Computer Engineering, specializing in the area o
f Control Engineering, from the National University of Singapore in 2009. Dr Abidi is currently a lecturer of Electrical Power Engineering at Newcastle University based in Singapore. Prior to joining Newcastle University Dr Abidi worked as an Assistant Professor of Mechatronics Engineering at Bahcesehir University, Istanbul, Turkey from September 2009 until June 2014. His research interests include: Theory and modelling of dynamical systems, Discrete-Time systems, Time-delay systems, Learning Control, Robust Control, Applied Nonlinear Control, Robotics and Mechatronic Systems.Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.
Vendeur : Universitätsbuchhandlung Herta Hold GmbH, Berlin, Allemagne
235 mm x 155 mm. XII, 224 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Stamped. Studies in Systems, Decision and Control, Vol. 23. Sprache: Englisch. N° de réf. du vendeur 40393HB
Quantité disponible : 1 disponible(s)
Vendeur : Brook Bookstore On Demand, Napoli, NA, Italie
Etat : new. Questo è un articolo print on demand. N° de réf. du vendeur c7db1b5d457012a5e797640fec734824
Quantité disponible : Plus de 20 disponibles
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
Etat : New. In. N° de réf. du vendeur ria9789812874771_new
Quantité disponible : Plus de 20 disponibles
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Buch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book covers a wide spectrum of systems such as linear and nonlinear multivariable systems as well as control problems such as disturbance, uncertainty and time-delays. The purpose of this book is to provide researchers and practitioners a manual for the design and application of advanced discrete-time controllers. The book presents six different control approaches depending on the type of system and control problem. The first and second approaches are based on Sliding Mode control (SMC) theory and are intended for linear systems with exogenous disturbances. The third and fourth approaches are based on adaptive control theory and are aimed at linear/nonlinear systems with periodically varying parametric uncertainty or systems with input delay. The fifth approach is based on Iterative learning control (ILC) theory and is aimed at uncertain linear/nonlinear systems with repeatable tasks and the final approach is based on fuzzy logic control (FLC) and is intended for highly uncertain systems with heuristic control knowledge. Detailed numerical examples are provided in each chapter to illustrate the design procedure for each control method. A number of practical control applications are also presented to show the problem solving process and effectiveness with the advanced discrete-time control approaches introduced in this book. 236 pp. Englisch. N° de réf. du vendeur 9789812874771
Quantité disponible : 2 disponible(s)
Vendeur : moluna, Greven, Allemagne
Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Presents a wide spectrum of control problems in linear and nonlinear multivariable systemsCovers design and applications with illustrated examplesHighlights six different control approaches depending on the type of system and control proble. N° de réf. du vendeur 23485742
Quantité disponible : Plus de 20 disponibles
Vendeur : Books Puddle, New York, NY, Etats-Unis
Etat : New. pp. 224. N° de réf. du vendeur 26372413209
Quantité disponible : 4 disponible(s)
Vendeur : Majestic Books, Hounslow, Royaume-Uni
Etat : New. Print on Demand pp. 224. N° de réf. du vendeur 373632198
Quantité disponible : 4 disponible(s)
Vendeur : Biblios, Frankfurt am main, HESSE, Allemagne
Etat : New. PRINT ON DEMAND pp. 224. N° de réf. du vendeur 18372413203
Quantité disponible : 4 disponible(s)
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Buch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book covers a wide spectrum of systems such as linear and nonlinear multivariable systems as well as control problems such as disturbance, uncertainty and time-delays. The purpose of this book is to provide researchers and practitioners a manual for the design and application of advanced discrete-time controllers.The book presents six different control approaches depending on the type of system and control problem. The first and second approaches are based on Sliding Mode control (SMC) theory and are intended for linear systems with exogenous disturbances. The third and fourth approaches are based on adaptive control theory and are aimed at linear/nonlinear systems with periodically varying parametric uncertainty or systems with input delay. The fifth approach is based on Iterative learning control (ILC) theory and is aimed at uncertain linear/nonlinear systems with repeatable tasks and the final approach is based on fuzzy logic control (FLC) and is intended for highly uncertain systems with heuristic control knowledge. Detailed numerical examples are providedineach chaptertoillustrate the design procedure for each control method.A number of practical control applications are also presentedto showtheproblem solving process and effectiveness withthe advanced discrete-time control approaches introduced in this book.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 236 pp. Englisch. N° de réf. du vendeur 9789812874771
Quantité disponible : 1 disponible(s)
Vendeur : Revaluation Books, Exeter, Royaume-Uni
Hardcover. Etat : Brand New. 2015 edition. 224 pages. 9.25x6.25x0.75 inches. In Stock. N° de réf. du vendeur x-9812874771
Quantité disponible : 2 disponible(s)