The Kitchen Cabinetmaker's Handbook: Professional Methods from Room Layout and Shop Drawings to Fabrication, Fitting, and Installation - Couverture souple

McElroy, Robert L

Couverture souple

ISBN 13 : 9798171270438

Editeur : Independently published, 2026

Synopsis

A cabinet build only goes as smoothly as its worst-documented step — and most kitchen cabinetmaking books leave the tolerances, the failure modes, and the pricing math for you to find out the hard way.

This 462-page handbook is built around the two systems that actually run North American kitchen cabinetry — traditional face-frame construction and 32mm-system frameless — and every discipline that connects them into one coherent shop process: measurement, shop drawings and cut lists, joinery, hardware, finishing, installation, and estimating.

Every build chapter follows the same shop discipline: a tools and materials list, a cut/detail list, the critical dimensions and tolerances that actually matter, numbered build phases, a troubleshooting table, and a named Mistake Autopsy — a real failure mode with its root cause, not a generic warning. Worked examples show real numbers throughout: a 32mm hole-line layout on a 762mm panel, a 1.5-inch scribe filler calculated against a masonry chimney wall, a floating door panel sized with a 1/4-inch movement allowance, and — in the estimating chapter — the difference between margin and markup, shown against a real $10,000 cost base where a misapplied markup quietly shorts the job by over $1,800.

What's inside

• Six parts: Design & Planning, Engineering & Shop Drawings, Fabrication, Rough-In/Hardware/Finishing, Installation & Business, and Field Reference

• Full build sequences for face-frame and frameless carcasses, door and drawer-front fitting, hardware boring and adjustment, HVLP spray finishing, installation leveling and scribing, and countertop trim-out

• A full estimating, bidding, and project-management chapter with labor benchmarks and a worked project estimate

• A field-reference chapter organized by diagnostic symptom, not just by topic

• Eight appendices: dimension and clearance reference, hardware specification reference, wood species and sheet-good reference, finish schedule reference, glossary, metric conversion reference, and a standards/codes/estimating reference, plus blank field templates for measurement, cut lists, and estimating worksheets

Key topics

Face-frame vs. frameless engineering, the 32mm system, shop drawing and cut-list conventions, hardware specification and adjustment, HVLP finishing, installation leveling and scribing, estimating and margin math, field diagnosis and troubleshooting.

Who this is for

The intermediate-to-professional kitchen cabinetmaker — a shop-trained apprentice moving into independent work, a tradesperson expanding from general woodworking into production kitchen cabinetry, or an established shop standardizing its own internal training. It assumes real shop experience; it is not a first woodworking book.

Open to any chapter and you're working from the same reference a production cabinet shop would build its own training around — the tolerances, the failure modes, and the numbers included.

Détails de l'édition

• Éditeur: Independently published
• Date d'édition: 2026
• Langue: anglais
• ISBN 13: 9798171270438
• Reliure: Tapa blanda
• Nombre de pages: 462
• Coordonnées du fabricant: Manufactured by Amazon on behalf of the author; https://www.amazon.es/hz/contact-us; ; c/o Amazon Media EU S.à.r.l., 38 Avenue John F. Kennedy; Luxembourg; L-1855; Luxembourg