Modern Refrigeration and Air Conditioning Handbook: A Step-by-Step Field Guide to HVACR Fundamentals, Refrigeration Systems, Installation, and Fault Diagnosis - Couverture souple

Crawford, P.E, William H.

Couverture souple

ISBN 13 : 9798194239610

Editeur : Independently published, 2026

Synopsis

Stop Guessing at the Gauges
Refrigeration defeats capable people in one repeatable way. They learn the components in isolation, they learn the procedures as recipes, and they never assemble the two into a picture of the system as one connected loop. Then a machine misbehaves in a way the recipe never covered, and there is nothing left to reason from.

A Suction Pressure Is Not a Number on a Chart
It is a saturation temperature, which is a heat transfer condition, which is a statement about load, airflow and charge. When that chain is invisible, sound parts get replaced, undersizing gets misread as undercharge, and the same failure returns next season.

What This Handbook Gives You
The compressor, condenser, metering device and evaporator treated as four positions on one continuous circuit — followed from thermodynamic first principles all the way to a reading at a service port. Every equation defines its variables and units. Every worked example is solved in full, assumptions first, units tracked at every step.

You Will Be Able To

• Read superheat and subcooling together to separate undercharge, restriction, airflow and compressor faults
• Plot a real cycle from field measurements and read its distortions as evidence
• Split a load into sensible and latent halves, then size ducts and select equipment that handle both
• Design piping for pressure drop, velocity and oil return, then evacuate, charge and verify the charge
• Commission a system properly, from pre-functional checks through balancing to documented handover
• Work with mildly flammable refrigerants where they change charge limits, piping and service practice
• Confirm a diagnosis before acting, and find the root cause instead of the failed part

Built to Be Used, Not Just Read
Sixteen chapters, each with learning objectives, stated prerequisites, worked examples and verified practice problems. Five appendices, including a diagnostic quick reference and site-ready installation and commissioning checklists. One consistent notation set, a glossary and a list of symbols. Inch-pound units primary, written to United States practice.

Written For
Design and application engineers, service engineers, senior technicians, facilities engineers, instructors, and upper-level students with an introductory thermodynamics background.
Turn measurements into deductions. Open this handbook and start reading systems the way they actually behave.

Détails de l'édition

• Éditeur: Independently published
• Date d'édition: 2026
• Langue: anglais
• ISBN 13: 9798194239610
• Reliure: Broché
• Nombre de pages: 489
• Coordonnées du fabricant: Manufactured by Amazon on behalf of the author; https://www.amazon.fr/hz/contact-us; ; c/o Amazon Media EU S.à.r.l., 38 Avenue John F. Kennedy; Luxembourg; L-1855; Luxembourg