Tool life and surface integrity when hard turning stainless steel using wiper coated carbide tool

Langue : anglais

Edité par GRIN Verlag, GRIN Verlag Mai 2012, 2012

3656193231 / 9783656193234

Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, AllemagneBuchWeltWeit Ludwig Meier e.K.

Vendeur avec une évaluation de 5 étoiles

Vendeur AbeBooks depuis 11 janvier 2012

Afficher les articles de ce vendeur
Livre broché

Etat: Neuf

EUR 47,95

EUR 23,00 expédition 
Expédition depuis Allemagne vers Etats-Unis

Quantité disponible : 2 disponible(s)

Ajouter au panier
Retours gratuits sous 30 jours

Item description from seller

This item is printed on demand - it takes 3-4 days longer - Neuware -Master's Thesis from the year 2008 in the subject Engineering - Mechanical Engineering, grade: Satisfactory, University College of Technology and Innovation, Malaysia (Universiti Teknologi Malaysia), language: English, abstract: The feasibility of implementing hard turning partially depends on the performance of the cutting tool in generating the required machined parts. Since process efficiency is a continuous pursue, there is always a need of having inexpensive cutting tools able to deliver the expected quality of machined surfaces and having reasonable life times. For this purpose, the selection of cutting conditions and its performance are important. In this study, a carbide tool with TiAlN coating is proposed as the low cost alternative for performing moderate range of hard turning. Specifically, a coated carbide tool with wiper geometry was used to machine hardened martensitic stainless steel (47 - 48 HRC). The tool's performance is evaluated based on its tool life and the resulting surface finish when hard turning at various cutting speeds (100, 130, and 170 m/min) and feeds (0.125, 0.16, 0.2, and 0.25 mm/rev) and at constant depth of cut of 0.4 mm under dry condition. Further observation was made on the worn tool, the machined surface, and the generated chip. The wiper coated carbide tool lasts mostly beyond 2 minutes and even reaches a maximum of almost 18 minutes of service life time.Combination of abrasion and diffusion are suggested to be the main wear mechanisms of the cutting tool. The resulting surface finish is very fine, being entirely finer than 0.8 mim in Ra which is one level better than the theoretically expected value. Empirical models are developed to quantify the effect of cutting speed and feed to the tool life and Ra. Further observation at the optimum processparameter combination, for example the lowest cutting speed-lowest feed, reveals minimum machining-induced surface microstruct 108 pp. Englisch.

N° de réf. du vendeur 9783656193234

Titre
Tool life and surface integrity when hard turning stainless steel using wiper coated carbide tool
Auteur
Denni Kurniawan
Éditeur
GRIN Verlag, GRIN Verlag Mai 2012
Année de publication
2012
État de l'article
Neu
Reliure
Taschenbuch
Langue
anglais
ISBN à 10 chiffres
3656193231
ISBN à 13 chiffres
9783656193234
Poids de l'article
169 grammes
Dimensions
210x148x8 mm

BuchWeltWeit Ludwig Meier e.K.

Bergisch Gladbach, Allemagne

Vendeur avec une évaluation de 5 étoiles

Vendeur AbeBooks depuis 11 janvier 2012

Frais d'expédition de Allemagne vers Etats-Unis

Article5 à 15 jours ouvrés5 à 15 jours ouvrés
Premier articleEUR 23,00EUR 23,00
Les délais de livraison sont fixés par les vendeurs et varient en fonction du transporteur et du lieu. Les commandes transitant par les douanes peuvent être retardées et les acheteurs sont responsables de tous les droits ou frais associés. Les vendeurs peuvent vous contacter au sujet de frais supplémentaires afin de couvrir toute augmentation des coûts d'expédition de vos articles.

Modes de paiement

  • Visa
  • Mastercard
  • American Express
  • Carte Bleue
  • Apple Pay
  • Google Pay
  • Chèque
  • Paypal
  • Virement bancaire

Profil professionnel du vendeur

BuchWeltWeit Ludwig Meier e.K.

Allemagne