Articles liés à Reaction Injection Molding and Fast Polymerization...
Synopsis
The emergence of reaction injection molding (RIM) has been fol- lowed by the industry with mounting interest. RIM technology has brought to polymer processing a new flexibility and savings in both energy and capital investment. The new developments and the number of engineers and scientists working in RIM is growing at so fast a rate that there is need for sharing information on progress in this area. This book is based on papers presented at the International Symposium on Reaction Injection Molding which was held in 1981 in Atlanta, Georgia, and was sponsored by the American Chemical Society, Division of Organic Coatings and Plastics Chemistry. The book is divided into four parts covering different areas of RIM development. The first part is devoted to the future trends of RIM develop- ment in the United States and Japan. The structure-properties relationship and effects of annealing on properties of RIM elastomers are covered in the second part. New non-urethane polymers such as polyamides, polyisocyanurates and polystyrene suitable for RIM processing are discussed in the third part. In the last part the engineering and technological aspects of RIM, such as glass reinforcement, mixing, flow and moldability are covered in detail. Finally I would like to thank Mrs. Iris Glebe for typing this book and for help with editing, and K. Zielinski for his assistance v vi PREFACE in reviewing and, when necessary, correcting some of the papers. Thanks is also due to the editors of Plenum for their patience and helpfulness.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
Acheter neuf
Afficher cet article
EUR 48,33
EUR 6,81 expédition vers Etats-Unis
Destinations, frais et délaisAutres éditions populaires du même titre
Résultats de recherche pour Reaction Injection Molding and Fast Polymerization...
Image d'archives
Reaction Injection Molding and Fast Polymerization Reactions (Polymer Science and Technology Series)
Vendeur : Best Price, Torrance, CA, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. SUPER FAST SHIPPING. N° de réf. du vendeur 9781468487350
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
Reaction Injection Molding and Fast Polymerization Reactions (Paperback or Softback)
Edité par
Springer 6/15/2012, 2012
ISBN 10 : 1468487353
ISBN 13 : 9781468487350
Neuf
Paperback or Softback
Vendeur : BargainBookStores, Grand Rapids, MI, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Paperback or Softback. Etat : New. Reaction Injection Molding and Fast Polymerization Reactions 1.21. Book. N° de réf. du vendeur BBS-9781468487350
Quantité disponible : 5 disponible(s)
Image d'archives
Reaction Injection Molding and Fast Polymerization Reactions (Polymer Science and Technology Series)
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. In. N° de réf. du vendeur ria9781468487350_new
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
Reaction Injection Molding and Fast Polymerization Reactions
impression à la demandeVendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The emergence of reaction injection molding (RIM) has been fol lowed by the industry with mounting interest. RIM technology has brought to polymer processing a new flexibility and savings in both energy and capital investment. The new developments and the number of engineers and scientists working in RIM is growing at so fast a rate that there is need for sharing information on progress in this area. This book is based on papers presented at the International Symposium on Reaction Injection Molding which was held in 1981 in Atlanta, Georgia, and was sponsored by the American Chemical Society, Division of Organic Coatings and Plastics Chemistry. The book is divided into four parts covering different areas of RIM development. The first part is devoted to the future trends of RIM develop ment in the United States and Japan. The structure-properties relationship and effects of annealing on properties of RIM elastomers are covered in the second part. New non-urethane polymers such as polyamides, polyisocyanurates and polystyrene suitable for RIM processing are discussed in the third part. In the last part the engineering and technological aspects of RIM, such as glass reinforcement, mixing, flow and moldability are covered in detail. Finally I would like to thank Mrs. Iris Glebe for typing this book and for help with editing, and K. Zielinski for his assistance v vi PREFACE in reviewing and, when necessary, correcting some of the papers. Thanks is also due to the editors of Plenum for their patience and helpfulness. 316 pp. Englisch. N° de réf. du vendeur 9781468487350
Quantité disponible : 2 disponible(s)
Image d'archives
Reaction Injection Molding and Fast Polymerization Reactions
Vendeur : Books Puddle, New York, NY, Etats-Unis
Évaluation du vendeur 4 sur 5 étoiles
Etat : New. pp. 316. N° de réf. du vendeur 2697852123
Quantité disponible : 4 disponible(s)
Image d'archives
Reaction Injection Molding and Fast Polymerization Reactions
Edité par
Springer-Verlag New York Inc., 2012
ISBN 10 : 1468487353
ISBN 13 : 9781468487350
Neuf
Paperback / softback
Vendeur : THE SAINT BOOKSTORE, Southport, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Paperback / softback. Etat : New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days 579. N° de réf. du vendeur C9781468487350
Quantité disponible : Plus de 20 disponibles
Image d'archives
Reaction Injection Molding and Fast Polymerization Reactions
impression à la demandeVendeur : Majestic Books, Hounslow, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. Print on Demand pp. 316 66:B&W 7 x 10 in or 254 x 178 mm Perfect Bound on White w/Gloss Lam. N° de réf. du vendeur 94545156
Quantité disponible : 4 disponible(s)
Image d'archives
Reaction Injection Molding and Fast Polymerization Reactions
impression à la demandeVendeur : Biblios, Frankfurt am main, HESSE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. PRINT ON DEMAND pp. 316. N° de réf. du vendeur 1897852113
Quantité disponible : 4 disponible(s)
Image fournie par le vendeur
Reaction Injection Molding and Fast Polymerization Reactions
Vendeur : moluna, Greven, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. N° de réf. du vendeur 4205126
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
Reaction Injection Molding and Fast Polymerization Reactions
Edité par
Springer US, Springer US Jun 2012, 2012
ISBN 10 : 1468487353
ISBN 13 : 9781468487350
Neuf
Taschenbuch
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Taschenbuch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -The emergence of reaction injection molding (RIM) has been fol lowed by the industry with mounting interest. RIM technology has brought to polymer processing a new flexibility and savings in both energy and capital investment. The new developments and the number of engineers and scientists working in RIM is growing at so fast a rate that there is need for sharing information on progress in this area. This book is based on papers presented at the International Symposium on Reaction Injection Molding which was held in 1981 in Atlanta, Georgia, and was sponsored by the American Chemical Society, Division of Organic Coatings and Plastics Chemistry. The book is divided into four parts covering different areas of RIM development. The first part is devoted to the future trends of RIM develop ment in the United States and Japan. The structure-properties relationship and effects of annealing on properties of RIM elastomers are covered in the second part. New non-urethane polymers such as polyamides, polyisocyanurates and polystyrene suitable for RIM processing are discussed in the third part. In the last part the engineering and technological aspects of RIM, such as glass reinforcement, mixing, flow and moldability are covered in detail. Finally I would like to thank Mrs. Iris Glebe for typing this book and for help with editing, and K. Zielinski for his assistance v vi PREFACE in reviewing and, when necessary, correcting some of the papers. Thanks is also due to the editors of Plenum for their patience and helpfulness.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 316 pp. Englisch. N° de réf. du vendeur 9781468487350
Quantité disponible : 1 disponible(s)