Articles liés à The Boundary Element Method With Programming: An Introductio...
Synopsis
This thorough yet understandable introduction to the boundary element method presents an attractive alternative to the finite element method. It not only explains the theory but also presents the implementation of the theory into computer code, the code in FORTRAN 95 can be freely downloaded. The book also addresses the issue of efficiently using parallel processing hardware in order to considerably speed up the computations for large systems. The applications range from problems of heat and fluid flow to static and dynamic elasto-plastic problems in continuum mechanics. After each chapter several exercises are shown, which makes the book suitable as teaching material in a class on the BEM. In addition, the book includes several applications of the method to industrial problems, that show the advantage over other methods.
Les informations fournies dans la section « Synopsis » peuvent faire référence à une autre édition de ce titre.
À propos de l?auteur
Gernot Beer is Professor and head of the Institute for Structural Analysis at the Graz University of Technology. He has been involved in the development, teaching and application of the BEM and the coupled BEM/FEM and has written several texts on the subject. He is the author of the commercial program BEFE and heads the development of its successor BEFE++.
Ian M. Smith is Professor of Engineering at the University of Manchester. He has consulted widely on engineering projects and has written several texts on applied numerical analysis.
Christian Dünser is staff scientist at the Institute for Structural Analysis at the Graz University of Technology. Since his diploma thesis he has been working on the BEM and its application to geotechnical problems, in particular tunnelling.
Les informations fournies dans la section « A propos du livre » peuvent faire référence à une autre édition de ce titre.
Acheter neuf
Afficher cet article
EUR 75,46
EUR 7,77 expédition depuis Etats-Unis vers France
Destinations, frais et délaisAutres éditions populaires du même titre
Résultats de recherche pour The Boundary Element Method With Programming: An Introductio...
Image d'archives
The Boundary Element Method with Programming
Vendeur : Books Puddle, New York, NY, Etats-Unis
Évaluation du vendeur 4 sur 5 étoiles
Etat : New. pp. xiv + 494 1st Edition. N° de réf. du vendeur 26294896
Quantité disponible : 1 disponible(s)
Image d'archives
The Boundary Element Method with Programming
Vendeur : Majestic Books, Hounslow, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. pp. xiv + 494 Illus. N° de réf. du vendeur 7585839
Quantité disponible : 1 disponible(s)
Image d'archives
The Boundary Element Method with Programming
Vendeur : Biblios, Frankfurt am main, HESSE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. pp. xiv + 494. N° de réf. du vendeur 18294906
Quantité disponible : 1 disponible(s)
Image d'archives
The Boundary Element Method With Programming.
Vendeur : Romtrade Corp., STERLING HEIGHTS, MI, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide. N° de réf. du vendeur ABNR-92194
Quantité disponible : 1 disponible(s)
Image d'archives
The Boundary Element Method With Programming.
Vendeur : Basi6 International, Irving, TX, Etats-Unis
Évaluation du vendeur 5 sur 5 étoiles
Etat : Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service. N° de réf. du vendeur ABEJUNE24-262201
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
The Boundary Element Method with Programming
impression à la demandeVendeur : moluna, Greven, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Gebunden. Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Introductory text for engineers and scientistsCovers theory and implementation Deals with a wide range of applicationsGernot Beer is Professor and head of the Institute for Structural Analysis at the Graz University of Technology. N° de réf. du vendeur 4487928
Quantité disponible : Plus de 20 disponibles
Image d'archives
The Boundary Element Method with Programming: For Engineers and Scientists
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
Évaluation du vendeur 5 sur 5 étoiles
Etat : New. In. N° de réf. du vendeur ria9783211715741_new
Quantité disponible : Plus de 20 disponibles
Image fournie par le vendeur
The Boundary Element Method with Programming : For Engineers and Scientists
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Buch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This is a sequel to the book 'Programming the Boundary Element Method' by G. Beer published by Wiley in 2001. The scope of this book is different however and this is reflected in the title. Whereas the previous book concentrated on explaining the implementation of a limited range of problems into computer code and the emphasis was on programming, in the current book the problems covered are extended, the emphasis is on explaining the theory and computer code is not presented for all topics. The new topics covered range from dynamics to piezo-electricity. However, the main idea, to provide an explanation of the Boundary Element Method (BEM), that is easy for engineers and scientists to follow, is retained. This is achieved by explaining some aspects of the method in an engineering rather than mathematical way. Another new feature of the book is that it deals with the implementation of the method on parallel processing hardware. I. M. Smith, who has been involved in programming the finite element method for decades, illustrates that the BEM is 'embarrassingly parallelisable'. It is shown that the conversion of the BEM programs to run efficiently on parallel processing hardware is not too difficult and the results are very impressive, such as solving a 20 000 element problem during a 'coffee break'. N° de réf. du vendeur 9783211715741
Quantité disponible : 1 disponible(s)
Image fournie par le vendeur
The Boundary Element Method with Programming
Edité par
Springer Vienna Apr 2008, 2008
ISBN 10 : 3211715746
ISBN 13 : 9783211715741
Neuf
Couverture rigide
Vendeur : BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Buch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This is a thorough, yet understandable text about the boundary element method (BEM), an attractive alternative to the finite element method (FEM). It not only explains the theory, but also deals with the implementation into computer code written in FORTRAN 95 (software can be freely downloaded). Applications range from potential problems to static and dynamic problems in elasticity and plasticity. The book also addresses the issue of fast solution of large scale problems, using parallel processing hardware. Special topics such as the treatment of inclusions, heterogeneous domains and changing geometry are also addressed. Most chapters contain exercises and this makes the book suitable for teaching. Applications of the method to industrial problems are shown. The book is designed for engineers and scientists that want to understand how the method works and to apply the method and solve real problems. 516 pp. Englisch. N° de réf. du vendeur 9783211715741
Quantité disponible : 2 disponible(s)
Image fournie par le vendeur
The Boundary Element Method with Programming
Edité par
Springer Vienna, Springer Vienna Apr 2008, 2008
ISBN 10 : 3211715746
ISBN 13 : 9783211715741
Neuf
Couverture rigide
Vendeur : buchversandmimpf2000, Emtmannsberg, BAYE, Allemagne
Évaluation du vendeur 5 sur 5 étoiles
Buch. Etat : Neu. Neuware -This is a sequel to the book ¿Programming the Boundary Element Method¿ by G. Beer published by Wiley in 2001. The scope of this book is different however and this is reflected in the title. Whereas the previous book concentrated on explaining the implementation of a limited range of problems into computer code and the emphasis was on programming, in the current book the problems covered are extended, the emphasis is on explaining the theory and computer code is not presented for all topics. The new topics covered range from dynamics to piezo-electricity. However, the main idea, to provide an explanation of the Boundary Element Method (BEM), that is easy for engineers and scientists to follow, is retained. This is achieved by explaining some aspects of the method in an engineering rather than mathematical way. Another new feature of the book is that it deals with the implementation of the method on parallel processing hardware. I. M. Smith, who has been involved in programming the finite element method for decades, illustrates that the BEM is ¿embarrassingly parallelisable¿. It is shown that the conversion of the BEM programs to run efficiently on parallel processing hardware is not too difficult and the results are very impressive, such as solving a 20 000 element problem during a ¿coffee break¿.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 516 pp. Englisch. N° de réf. du vendeur 9783211715741
Quantité disponible : 2 disponible(s)