advanced system development technologies (36 résultats)

Hardcover. Etat : new. Hardcover. This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Modern approaches to the synthesis of algorithmic support for a strapdown inertial attitude system are considered. The general characteristics of navigation systems and the composition of their inertial measurement unit are given. The methods of initial alignment of the system on a stationary base are described. Particular attention is paid to the attitude kinematic parameters of the body frame and methods of their numerical integration. Picard's methods for integrating the Bortz and Poisson kinematic equations are shown. An algorithm for a strapdown inertial attitude system based on using real signals of high-precision laser gyroscopes is proposed. System simulation was carried out using the proposed algorithmic methods.The relevance of the control system created for the processing device parts in the conditions of automated manufacturing is substantiated. Theoretical studies are presented, and the relation between electrical signals, the level of tool wear, and the main reasons for generating electrical signals are identified. A mathematical model of cutting tool wear control was developed based on measuring the variable component of cutting electromotive force. A control system for processing device parts on computer numerical control machines in automated production conditions has been developed. It allows for recording critical wear and breakage of the cutting tool, performing its dimensional adjustment directly on the device, and carrying out its industrial approval in flexible production systems. This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Taschenbuch. Etat : Neu. Advanced System Development Technologies I | Mykhailo Bezuglyi (u. a.) | Taschenbuch | Studies in Systems, Decision and Control | xiii | Englisch | 2024 | Springer | EAN 9783031443497 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Etat : Sehr gut. Zustand: Sehr gut | Seiten: 428 | Sprache: Englisch | Produktart: Bücher | This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Modern approaches to the synthesis of algorithmic support for a strapdown inertial attitude system are considered. The general characteristics of navigation systems and the composition of their inertial measurement unit are given. The methods of initial alignment of the system on a stationary base are described. Particular attention is paid to the attitude kinematic parameters of the body frame and methods of their numerical integration. Picard's methods for integrating the Bortz and Poisson kinematic equations are shown. An algorithm for a strapdown inertial attitude system based on using real signals of high-precision laser gyroscopes is proposed. System simulation was carried out using the proposed algorithmic methods.The relevance of the control system created for the processing device parts in the conditions of automated manufacturing is substantiated. Theoretical studies are presented, and the relation between electrical signals, the level of tool wear, and the main reasons for generating electrical signals are identified. A mathematical model of cutting tool wear control was developed based on measuring the variable component of cutting electromotive force. A control system for processing device parts on computer numerical control machines in automated production conditions has been developed. It allows for recording critical wear and breakage of the cutting tool, performing its dimensional adjustment directly on the device, and carrying out its industrial approval in flexible production systems.

Etat : Hervorragend. Zustand: Hervorragend | Seiten: 428 | Sprache: Englisch | Produktart: Bücher | This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Modern approaches to the synthesis of algorithmic support for a strapdown inertial attitude system are considered. The general characteristics of navigation systems and the composition of their inertial measurement unit are given. The methods of initial alignment of the system on a stationary base are described. Particular attention is paid to the attitude kinematic parameters of the body frame and methods of their numerical integration. Picard's methods for integrating the Bortz and Poisson kinematic equations are shown. An algorithm for a strapdown inertial attitude system based on using real signals of high-precision laser gyroscopes is proposed. System simulation was carried out using the proposed algorithmic methods.The relevance of the control system created for the processing device parts in the conditions of automated manufacturing is substantiated. Theoretical studies are presented, and the relation between electrical signals, the level of tool wear, and the main reasons for generating electrical signals are identified. A mathematical model of cutting tool wear control was developed based on measuring the variable component of cutting electromotive force. A control system for processing device parts on computer numerical control machines in automated production conditions has been developed. It allows for recording critical wear and breakage of the cutting tool, performing its dimensional adjustment directly on the device, and carrying out its industrial approval in flexible production systems.

Hardcover. Etat : new. Hardcover. This book is the second in the series Advanced System Development Technologies: Studies in Systems, Decision and Control. As in the previous volume, the sections of the book are grouped into three directions: optoelectronic technologies, medical technologies, and technological support.The prerequisites for solving the problem of increasing the efficiency of mechanical assembly production are presented, based on the creation of a new method and system for technological preparation of small-scale production in instrument engineering, which takes into account the dominant influence of assembly processes on the time and cost of instrument manufacturing. A new structure and sequence for the technological preparation of instrument production with a formalized relationship between machining and assembly production are proposed. A new model of an assembled product in instrument engineering has been developed, taking into account the labor intensity and specifics of assembly, adjustment, and control-measurement operations, as well as methods for automated design of technological assembly processes. Additionally, a functional model for forming the product structure based on the labor intensity of manufacturing assembly units is proposed, allowing for the formulation of a substantiated plan for the production of parts. A mathematical model of the assembly sequence has also been developed, enabling the construction of an assembly sequence considering organizational and technical factors. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Etat : New.

Taschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering.

Etat : New. pp. 428 1st ed. 2024 edition NO-PA16APR2015-KAP.

Buch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Modern approaches to the synthesis of algorithmic support for a strapdown inertial attitude system are considered. The general characteristics of navigation systems and the composition of their inertial measurement unit are given. The methods of initial alignment of the system on a stationary base are described. Particular attention is paid to the attitude kinematic parameters of the body frame and methods of their numerical integration. Picard's methods for integrating the Bortz and Poisson kinematic equations are shown. An algorithm for a strapdown inertial attitude system based on using real signals of high-precision laser gyroscopes is proposed. System simulation was carried out using the proposed algorithmic methods.The relevance of the control system created for the processing device parts in the conditions of automated manufacturing is substantiated. Theoretical studies are presented, and the relation between electrical signals, the level of tool wear, and the main reasons for generating electrical signals are identified. A mathematical model of cutting tool wear control was developed based on measuring the variable component of cutting electromotive force. A control system for processing device parts on computer numerical control machines in automated production conditions has been developed. It allows for recording critical wear and breakage of the cutting tool, performing its dimensional adjustment directly on the device, and carrying out its industrial approval in flexible production systems.

Taschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is the second in the series Advanced System Development Technologies: Studies in Systems, Decision and Control. As in the previous volume, the sections of the book are grouped into three directions: optoelectronic technologies, medical technologies, and technological support.The prerequisites for solving the problem of increasing the efficiency of mechanical assembly production are presented, based on the creation of a new method and system for technological preparation of small-scale production in instrument engineering, which takes into account the dominant influence of assembly processes on the time and cost of instrument manufacturing. A new structure and sequence for the technological preparation of instrument production with a formalized relationship between machining and assembly production are proposed. A new model of an assembled product in instrument engineering has been developed, taking into account the labor intensity and specifics of assembly, adjustment, and control-measurement operations, as well as methods for automated design of technological assembly processes. Additionally, a functional model for forming the product structure based on the labor intensity of manufacturing assembly units is proposed, allowing for the formulation of a substantiated plan for the production of parts. A mathematical model of the assembly sequence has also been developed, enabling the construction of an assembly sequence considering organizational and technical factors.

Buch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is the second in the series Advanced System Development Technologies: Studies in Systems, Decision and Control. As in the previous volume, the sections of the book are grouped into three directions: optoelectronic technologies, medical technologies, and technological support.The prerequisites for solving the problem of increasing the efficiency of mechanical assembly production are presented, based on the creation of a new method and system for technological preparation of small-scale production in instrument engineering, which takes into account the dominant influence of assembly processes on the time and cost of instrument manufacturing. A new structure and sequence for the technological preparation of instrument production with a formalized relationship between machining and assembly production are proposed. A new model of an assembled product in instrument engineering has been developed, taking into account the labor intensity and specifics of assembly, adjustment, and control-measurement operations, as well as methods for automated design of technological assembly processes. Additionally, a functional model for forming the product structure based on the labor intensity of manufacturing assembly units is proposed, allowing for the formulation of a substantiated plan for the production of parts. A mathematical model of the assembly sequence has also been developed, enabling the construction of an assembly sequence considering organizational and technical factors.

Etat : New.

Hardcover. Etat : Brand New. 426 pages. 9.25x6.10x1.10 inches. In Stock.

Etat : New.

Hardcover. Etat : Brand New. 480 pages. 9.25x6.10x9.45 inches. In Stock.

Etat : new. Questo è un articolo print on demand.

Etat : new. Questo è un articolo print on demand.

Etat : new. Questo è un articolo print on demand.

Gebunden. Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Covers optoelectronic technology, biological object analysis, and complex object state determinationIncludes infrared modeling, thermal imaging resolution, and electro-optical surveillance enhancement in optoelectronicsExplains vibroacousti.

Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Modern approaches to the synthesis of algorithmic support for a strapdown inertial attitude system are considered. The general characteristics of navigation systems and the composition of their inertial measurement unit are given. The methods of initial alignment of the system on a stationary base are described. Particular attention is paid to the attitude kinematic parameters of the body frame and methods of their numerical integration. Picard's methods for integrating the Bortz and Poisson kinematic equations are shown. An algorithm for a strapdown inertial attitude system based on using real signals of high-precision laser gyroscopes is proposed. System simulation was carried out using the proposed algorithmic methods.The relevance of the control system created for the processing device parts in the conditions of automated manufacturing is substantiated. Theoretical studies are presented, and the relation between electrical signals, the level of tool wear, and the main reasons for generating electrical signals are identified. A mathematical model of cutting tool wear control was developed based on measuring the variable component of cutting electromotive force. A control system for processing device parts on computer numerical control machines in automated production conditions has been developed. It allows for recording critical wear and breakage of the cutting tool, performing its dimensional adjustment directly on the device, and carrying out its industrial approval in flexible production systems. 428 pp. Englisch.

Buch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Modern approaches to the synthesis of algorithmic support for a strapdown inertial attitude system are considered. The general characteristics of navigation systems and the composition of their inertial measurement unit are given. The methods of initial alignment of the system on a stationary base are described. Particular attention is paid to the attitude kinematic parameters of the body frame and methods of their numerical integration. Picard's methods for integrating the Bortz and Poisson kinematic equations are shown. An algorithm for a strapdown inertial attitude system based on using real signals of high-precision laser gyroscopes is proposed. System simulation was carried out using the proposed algorithmic methods.The relevance of the control system created for the processing device parts in the conditions of automated manufacturing is substantiated. Theoretical studies are presented, and the relation between electrical signals, the level of tool wear, and the main reasons for generating electrical signals are identified. A mathematical model of cutting tool wear control was developed based on measuring the variable component of cutting electromotive force. A control system for processing device parts on computer numerical control machines in automated production conditions has been developed. It allows for recording critical wear and breakage of the cutting tool, performing its dimensional adjustment directly on the device, and carrying out its industrial approval in flexible production systems. 428 pp. Englisch.

Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.

Etat : New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.

Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book is the second in the series Advanced System Development Technologies: Studies in Systems, Decision and Control. As in the previous volume, the sections of the book are grouped into three directions: optoelectronic technologies, medical technologies, and technological support.The prerequisites for solving the problem of increasing the efficiency of mechanical assembly production are presented, based on the creation of a new method and system for technological preparation of small-scale production in instrument engineering, which takes into account the dominant influence of assembly processes on the time and cost of instrument manufacturing. A new structure and sequence for the technological preparation of instrument production with a formalized relationship between machining and assembly production are proposed. A new model of an assembled product in instrument engineering has been developed, taking into account the labor intensity and specifics of assembly, adjustment, and control-measurement operations, as well as methods for automated design of technological assembly processes. Additionally, a functional model for forming the product structure based on the labor intensity of manufacturing assembly units is proposed, allowing for the formulation of a substantiated plan for the production of parts. A mathematical model of the assembly sequence has also been developed, enabling the construction of an assembly sequence considering organizational and technical factors. 465 pp. Englisch.

Buch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book is the second in the series Advanced System Development Technologies: Studies in Systems, Decision and Control. As in the previous volume, the sections of the book are grouped into three directions: optoelectronic technologies, medical technologies, and technological support.The prerequisites for solving the problem of increasing the efficiency of mechanical assembly production are presented, based on the creation of a new method and system for technological preparation of small-scale production in instrument engineering, which takes into account the dominant influence of assembly processes on the time and cost of instrument manufacturing. A new structure and sequence for the technological preparation of instrument production with a formalized relationship between machining and assembly production are proposed. A new model of an assembled product in instrument engineering has been developed, taking into account the labor intensity and specifics of assembly, adjustment, and control-measurement operations, as well as methods for automated design of technological assembly processes. Additionally, a functional model for forming the product structure based on the labor intensity of manufacturing assembly units is proposed, allowing for the formulation of a substantiated plan for the production of parts. A mathematical model of the assembly sequence has also been developed, enabling the construction of an assembly sequence considering organizational and technical factors. 484 pp. Englisch.

Taschenbuch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Modern approaches to the synthesis of algorithmic support for a strapdown inertial attitude system are considered. The general characteristics of navigation systems and the composition of their inertial measurement unit are given. The methods of initial alignment of the system on a stationary base are described. Particular attention is paid to the attitude kinematic parameters of the body frame and methods of their numerical integration. Picard's methods for integrating the Bortz and Poisson kinematic equations are shown. An algorithm for a strapdown inertial attitude system based on using real signals of high-precision laser gyroscopes is proposed. System simulation was carried out using the proposed algorithmic methods.The relevance of the control system created for the processing device parts in the conditions of automated manufacturing is substantiated. Theoretical studies are presented, and the relation between electrical signals, the level of tool wear, and the main reasons for generating electrical signals are identified. A mathematical model of cutting tool wear control was developed based on measuring the variable component of cutting electromotive force. A control system for processing device parts on computer numerical control machines in automated production conditions has been developed. It allows for recording critical wear and breakage of the cutting tool, performing its dimensional adjustment directly on the device, and carrying out its industrial approval in flexible production systems.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 428 pp. Englisch.

Buch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book covers vibroacoustic monitoring, inertial attitude systems, and control system for device processing in complex objects. Modern approaches to the synthesis of algorithmic support for a strapdown inertial attitude system are considered. The general characteristics of navigation systems and the composition of their inertial measurement unit are given. The methods of initial alignment of the system on a stationary base are described. Particular attention is paid to the attitude kinematic parameters of the body frame and methods of their numerical integration. Picard's methods for integrating the Bortz and Poisson kinematic equations are shown. An algorithm for a strapdown inertial attitude system based on using real signals of high-precision laser gyroscopes is proposed. System simulation was carried out using the proposed algorithmic methods.The relevance of the control system created for the processing device parts in the conditions of automated manufacturing is substantiated. Theoretical studies are presented, and the relation between electrical signals, the level of tool wear, and the main reasons for generating electrical signals are identified. A mathematical model of cutting tool wear control was developed based on measuring the variable component of cutting electromotive force. A control system for processing device parts on computer numerical control machines in automated production conditions has been developed. It allows for recording critical wear and breakage of the cutting tool, performing its dimensional adjustment directly on the device, and carrying out its industrial approval in flexible production systems.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 428 pp. Englisch.

Buch. Etat : Neu. Advanced System Development Technologies II | Mykhailo Bezuglyi (u. a.) | Buch | Studies in Systems, Decision and Control | xv | Englisch | 2025 | Springer | EAN 9783031820342 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.

Etat : New. Print on Demand.

Taschenbuch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book is the second in the series Advanced System Development Technologies: Studies in Systems, Decision and Control. As in the previous volume, the sections of the book are grouped into three directions: optoelectronic technologies, medical technologies, and technological support.The prerequisites for solving the problem of increasing the efficiency of mechanical assembly production are presented, based on the creation of a new method and system for technological preparation of small-scale production in instrument engineering, which takes into account the dominant influence of assembly processes on the time and cost of instrument manufacturing. A new structure and sequence for the technological preparation of instrument production with a formalized relationship between machining and assembly production are proposed. A new model of an assembled product in instrument engineering has been developed, taking into account the labor intensity and specifics of assembly, adjustment, and control-measurement operations, as well as methods for automated design of technological assembly processes. Additionally, a functional model for forming the product structure based on the labor intensity of manufacturing assembly units is proposed, allowing for the formulation of a substantiated plan for the production of parts. A mathematical model of the assembly sequence has also been developed, enabling the construction of an assembly sequence considering organizational and technical factors.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 484 pp. Englisch.