Finite element analysis hyperbolic (10 résultats)

216 pp. with a lot of figures, Aus der Präsenzbibliothek eines Institutes, daher außergewöhnlich gut erhalten! (From the reference library of an institute, therefore exceptionally well preserved!) 3540167382 Sprache: Englisch Gewicht in Gramm: 380 Groß 8°, Original-Karton Bibliotheks-Exemplar (ordnungsgemäß entwidmet) mit kleinem Rückenschild, Stempel auf Titel, insgesamt gutes und innen sauberes Exemplar, (library copy in good condition).…

Etat : New. The analysis of thin shells of revolution in general has always occupied an important place in the theory of structures, and recently the problem of hyperbolic cooling towers has attracted many investigators due to the wide use of such shells in industry. U.

Taschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - The analysis of thin shells of revolution in general has always occupied an important place in the theory of structures, and recently the problem of hyperbolic cooling towers has attracted many investigators due to the wide use of such shells in industry. Until the early 1960's these towers were of moderate size, probably not exceeding 76m (250ft) height. In this range, the structural safety and stability were not of primary concern because, the minimum wall thickness and reinforcement were sufficient to provide the required safety. It was not necessary to use very rigorous methods to analyse the problem. The analysis involved the following assumptions, i) flexural stresses were ignored (membrane tneory), ii) The geometry of the shell was assumed to be perfect and to be idealised as a set of straight sided conical frusta, and iii) The boundary conditions at the base were taken to be fixed or continuously hinged with full tangential restraint.…

Paperback. Etat : Brand New. 228 pages. 9.61x6.69x0.52 inches. In Stock.

Etat : Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | The analysis of thin shells of revolution in general has always occupied an important place in the theory of structures, and recently the problem of hyperbolic cooling towers has attracted many investigators due to the wide use of such shells in industry. Until the early 1960's these towers were of moderate size, probably not exceeding 76m (250ft) height. In this range, the structural safety and stability were not of primary concern because, the minimum wall thickness and reinforcement were sufficient to provide the required safety. It was not necessary to use very rigorous methods to analyse the problem. The analysis involved the following assumptions, i) flexural stresses were ignored (membrane tneory), ii) The geometry of the shell was assumed to be perfect and to be idealised as a set of straight sided conical frusta, and iii) The boundary conditions at the base were taken to be fixed or continuously hinged with full tangential restraint.…

Etat : gut. 1986. Finite Element Analysis of Hyperbolic Cooling Towers. (= Lecture Notes in Engineering - Volume 20). In deutscher Sprache. pages.

Paperback. Etat : Very Good. Dust Jacket may NOT BE INCLUDED.CDs may be missing. SHIPS FROM MULTIPLE LOCATIONS. book.

Etat : Buone. inglese Condizioni dell'esterno: Buone Condizioni dell'interno: Buone.

Taschenbuch. Etat : Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The analysis of thin shells of revolution in general has always occupied an important place in the theory of structures, and recently the problem of hyperbolic cooling towers has attracted many investigators due to the wide use of such shells in industry. Until the early 1960's these towers were of moderate size, probably not exceeding 76m (250ft) height. In this range, the structural safety and stability were not of primary concern because, the minimum wall thickness and reinforcement were sufficient to provide the required safety. It was not necessary to use very rigorous methods to analyse the problem. The analysis involved the following assumptions, i) flexural stresses were ignored (membrane tneory), ii) The geometry of the shell was assumed to be perfect and to be idealised as a set of straight sided conical frusta, and iii) The boundary conditions at the base were taken to be fixed or continuously hinged with full tangential restraint. 228 pp. Englisch.…

Taschenbuch. Etat : Neu. This item is printed on demand - Print on Demand Titel. Neuware -The analysis of thin shells of revolution in general has always occupied an important place in the theory of structures, and recently the problem of hyperbolic cooling towers has attracted many investigators due to the wide use of such shells in industry. Until the early 1960's these towers were of moderate size, probably not exceeding 76m (250ft) height. In this range, the structural safety and stability were not of primary concern because, the minimum wall thickness and reinforcement were sufficient to provide the required safety. It was not necessary to use very rigorous methods to analyse the problem. The analysis involved the following assumptions, i) flexural stresses were ignored (membrane tneory), ii) The geometry of the shell was assumed to be perfect and to be idealised as a set of straight sided conical frusta, and iii) The boundary conditions at the base were taken to be fixed or continuously hinged with full tangential restraint.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 228 pp. Englisch.…