angelo luongo (67 résultats)

Etat : New.

Etat : New. 1st ed. 2024 edition NO-PA16APR2015-KAP.

Etat : New. In.

Etat : new.

Paperback. Etat : new. Paperback. This book overcomes the separation existing in literature between the static and the dynamic bifurcation worlds. It brings together buckling and post-buckling problems with nonlinear dynamics, the bridge being represented by the perturbation method, i.e., a mathematical tool that allows for solving static and dynamic problems virtually in the same way. The book is organized as follows: Chapter one gives an overview; Chapter two illustrates phenomenological aspect of static and dynamic bifurcations; Chapter three deals with linear stability analysis of dynamical systems; Chapter four and five discuss the general theory and present examples of buckling and post-buckling of elastic structures; Chapter six describes a linearized approach to buckling, usually adopted in the technical literature, in which pre-critical deformations are neglected; Chapters seven to ten, analyze elastic and elasto-plastic buckling of planar systems of beams, thin-walled beams and plate assemblies, respectively; Chapters eleven to thirteen, illustrate dynamic instability phenomena, such as flutter induced by follower forces, aeroelastic bifurcations caused by wind flow, and parametric excitation triggered by pulsating loads. Finally, Chapter fourteen discusses a large gallery of solved problems, concerning topics covered in the book. An Appendix presents the Vlasov theory of open thin-walled beams. The book is devoted to advanced undergraduate and graduate students, as well as engineers and practitioners. The methods illustrated here are immediately applicable to model real problems.The BookIntroduces, in a simple way, complex concepts of bifurcation theory, by making use of elementary mathematicsGives a comprehensive overview of bifurcation of linear and nonlinear structures, in static and dynamic fieldsContains a chapter in which many problems are solved, either analytically or numerically, and results commented Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Etat : new. Paperback. This book deals with kinematics and statics of rigid-body systems, lumped elasticity, variational principles, dynamics, stability and bifurcation, piece-wise linear (rigid-plastic or elasto-plastic) constitutive behavior, and geometrically nonlinear behavior. The presentation of the matter is strongly innovative: all the fundamental principles and methods, which are usually discussed for continuous media (namely, the displacement and force methods, the virtual work principle, the stationarity theorems of the total potential and complementary energies), are here illustrated for naturally discrete structures. Consequently, the fundamental problem of mechanics, which, for centenary worldwide tradition, is discussed in the context of the mathematical analysis, is here brought back to the algebra environment. Due to the strong simplifications of the calculus, the learner can focus his attention on the (complex) logical architecture of the linear and nonlinear elasticity theory (and later, of limit analysis), not being distracted by the mathematical difficulties inherent partial differential equations and boundary conditions. Moreover, he easily gains insight into the mechanical behavior of structures, which clearly emerges from the numerous examples presented.The book is mainly devoted to undergraduate students. However, it is also meant as a reading successive to classic texts on continuous systems, useful to graduate and Ph.D. students to deepen their knowledge of general principles and methods of structural mechanics. This book deals with kinematics and statics of rigid-body systems, lumped elasticity, variational principles, dynamics, stability and bifurcation, piece-wise linear (rigid-plastic or elasto-plastic) constitutive behavior, and geometrically nonlinear behavior. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

hardcover. Etat : Fine.

Paperback. Etat : Brand New. 723 pages. 9.25x6.10x9.25 inches. In Stock.

Etat : new.

Taschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering.

Buch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This concise text introduces the reader to the use of perturbation methods, able to investigate nonlinear phenomena in continuous (not only discrete) mechanical systems. Distinct from the classic books on perturbation methods, the algorithms are directly illustrated for continuous systems, referring to a very simple case-study as well as to a metamodel, for which Statics, Buckling, Dynamics and Bifurcation behavior are quickly analyzed. Moreover, fundamental mechanical aspects are discussed in dealing with applications. Concepts herein are reinforced with worked examples at the end the book, relevant to several continuous systems.

Taschenbuch. Etat : Neu. Perturbation Methods and Nonlinear Phenomena | Applications to Continuous Mechanical Systems | Angelo Luongo (u. a.) | Taschenbuch | Synthesis Lectures on Engineering, Science, and Technology | xi | Englisch | 2025 | Springer | EAN 9783031493997 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Paperback. Etat : new. Paperback. This book deals with kinematics and statics of rigid-body systems, lumped elasticity, variational principles, dynamics, stability and bifurcation, piece-wise linear (rigid-plastic or elasto-plastic) constitutive behavior, and geometrically nonlinear behavior. The presentation of the matter is strongly innovative: all the fundamental principles and methods, which are usually discussed for continuous media (namely, the displacement and force methods, the virtual work principle, the stationarity theorems of the total potential and complementary energies), are here illustrated for naturally discrete structures. Consequently, the fundamental problem of mechanics, which, for centenary worldwide tradition, is discussed in the context of the mathematical analysis, is here brought back to the algebra environment. Due to the strong simplifications of the calculus, the learner can focus his attention on the (complex) logical architecture of the linear and nonlinear elasticity theory (and later, of limit analysis), not being distracted by the mathematical difficulties inherent partial differential equations and boundary conditions. Moreover, he easily gains insight into the mechanical behavior of structures, which clearly emerges from the numerous examples presented.The book is mainly devoted to undergraduate students. However, it is also meant as a reading successive to classic texts on continuous systems, useful to graduate and Ph.D. students to deepen their knowledge of general principles and methods of structural mechanics. This book deals with kinematics and statics of rigid-body systems, lumped elasticity, variational principles, dynamics, stability and bifurcation, piece-wise linear (rigid-plastic or elasto-plastic) constitutive behavior, and geometrically nonlinear behavior. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.

Paperback. Etat : new. Paperback. This book deals with kinematics and statics of rigid-body systems, lumped elasticity, variational principles, dynamics, stability and bifurcation, piece-wise linear (rigid-plastic or elasto-plastic) constitutive behavior, and geometrically nonlinear behavior. The presentation of the matter is strongly innovative: all the fundamental principles and methods, which are usually discussed for continuous media (namely, the displacement and force methods, the virtual work principle, the stationarity theorems of the total potential and complementary energies), are here illustrated for naturally discrete structures. Consequently, the fundamental problem of mechanics, which, for centenary worldwide tradition, is discussed in the context of the mathematical analysis, is here brought back to the algebra environment. Due to the strong simplifications of the calculus, the learner can focus his attention on the (complex) logical architecture of the linear and nonlinear elasticity theory (and later, of limit analysis), not being distracted by the mathematical difficulties inherent partial differential equations and boundary conditions. Moreover, he easily gains insight into the mechanical behavior of structures, which clearly emerges from the numerous examples presented.The book is mainly devoted to undergraduate students. However, it is also meant as a reading successive to classic texts on continuous systems, useful to graduate and Ph.D. students to deepen their knowledge of general principles and methods of structural mechanics. This book deals with kinematics and statics of rigid-body systems, lumped elasticity, variational principles, dynamics, stability and bifurcation, piece-wise linear (rigid-plastic or elasto-plastic) constitutive behavior, and geometrically nonlinear behavior. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Etat : New.

Etat : New.

Etat : Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | This concise text introduces the reader to the use of perturbation methods, able to investigate nonlinear phenomena in continuous (not only discrete) mechanical systems. Distinct from the classic books on perturbation methods, the algorithms are directly illustrated for continuous systems, referring to a very simple case-study as well as to a metamodel, for which Statics, Buckling, Dynamics and Bifurcation behavior are quickly analyzed. Moreover, fundamental mechanical aspects are discussed in dealing with applications. Concepts herein are reinforced with worked examples at the end the book, relevant to several continuous systems.

Hardcover. Etat : new. Hardcover. This book overcomes the separation existing in literature between the static and the dynamic bifurcation worlds. It brings together buckling and post-buckling problems with nonlinear dynamics, the bridge being represented by the perturbation method, i.e., a mathematical tool that allows for solving static and dynamic problems virtually in the same way. The book is organized as follows: Chapter one gives an overview; Chapter two illustrates phenomenological aspect of static and dynamic bifurcations; Chapter three deals with linear stability analysis of dynamical systems; Chapter four and five discuss the general theory and present examples of buckling and post-buckling of elastic structures; Chapter six describes a linearized approach to buckling, usually adopted in the technical literature, in which pre-critical deformations are neglected; Chapters seven to ten, analyze elastic and elasto-plastic buckling of planar systems of beams, thin-walled beams and plate assemblies, respectively; Chapters eleven to thirteen, illustrate dynamic instability phenomena, such as flutter induced by follower forces, aeroelastic bifurcations caused by wind flow, and parametric excitation triggered by pulsating loads. Finally, Chapter fourteen discusses a large gallery of solved problems, concerning topics covered in the book. An Appendix presents the Vlasov theory of open thin-walled beams. The book is devoted to advanced undergraduate and graduate students, as well as engineers and practitioners. The methods illustrated here are immediately applicable to model real problems.The BookIntroduces, in a simple way, complex concepts of bifurcation theory, by making use of elementary mathematicsGives a comprehensive overview of bifurcation of linear and nonlinear structures, in static and dynamic fieldsContains a chapter in which many problems are solved, either analytically or numerically, and results commented Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Etat : Brand New. 500 pages. 9.26x6.11x9.25 inches. In Stock.

Taschenbuch. Etat : Neu. Rigid Structures with Point-Flexibility | Elasto-statics, Dynamics, Stability and Plastic Collapse | Angelo Luongo (u. a.) | Taschenbuch | xxi | Englisch | 2025 | Springer | EAN 9783031942426 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This book deals with kinematics and statics of rigid-body systems, lumped elasticity, variational principles, dynamics, stability and bifurcation, piece-wise linear (rigid-plastic or elasto-plastic) constitutive behavior, and geometrically nonlinear behavior. The presentation of the matter is strongly innovative: all the fundamental principles and methods, which are usually discussed for continuous media (namely, the displacement and force methods, the virtual work principle, the stationarity theorems of the total potential and complementary energies), are here illustrated for naturally discrete structures. Consequently, the fundamental problem of mechanics, which, for centenary worldwide tradition, is discussed in the context of the mathematical analysis, is here brought back to the algebra environment. Due to the strong simplifications of the calculus, the learner can focus his attention on the (complex) logical architecture of the linear and nonlinear elasticity theory (and later, of limit analysis), not being distracted by the mathematical difficulties inherent partial differential equations and boundary conditions. Moreover, he easily gains insight into the mechanical behavior of structures, which clearly emerges from the numerous examples presented.The book is mainly devoted to undergraduate students. However, it is also meant as a reading successive to classic texts on continuous systems, useful to graduate and Ph.D. students to deepen their knowledge of general principles and methods of structural mechanics.

Taschenbuch. Etat : Neu. Stability and Bifurcation of Structures | Statical and Dynamical Systems | Angelo Luongo (u. a.) | Taschenbuch | xvii | Englisch | 2024 | Springer | EAN 9783031275746 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This book overcomes the separation existing in literature between the static and the dynamic bifurcation worlds. It brings together buckling and post-buckling problems with nonlinear dynamics, the bridge being represented by the perturbation method, i.e., a mathematical tool that allows for solving static and dynamic problems virtually in the same way.The book is organized as follows: Chapter one gives an overview; Chapter two illustrates phenomenological aspect of static and dynamic bifurcations; Chapter three deals with linear stability analysis of dynamical systems; Chapter four and five discuss the general theory and present examples of buckling and post-buckling of elastic structures; Chapter six describes a linearized approach to buckling, usually adopted in the technical literature, in which pre-critical deformations are neglected; Chapters seven to ten, analyze elastic and elasto-plastic buckling of planar systems of beams, thin-walled beams and plate assemblies, respectively; Chapters eleven to thirteen, illustrate dynamic instability phenomena, such as flutter induced by follower forces, aeroelastic bifurcations caused by wind flow, and parametric excitation triggered by pulsating loads. Finally, Chapter fourteen discusses a large gallery of solved problems, concerning topics covered in the book. An Appendix presents the Vlasov theory of open thin-walled beams. The book is devoted to advanced undergraduate and graduate students, as well as engineers and practitioners. The methods illustrated here are immediately applicable to model real problems.The BookIntroduces, in a simple way, complex concepts of bifurcation theory, by making use of elementary mathematicsGives a comprehensive overview of bifurcation of linear and nonlinear structures, in static and dynamic fieldsContains a chapter in which many problems are solved, either analytically or numerically, and results commented.

Etat : New.

Paperback. Etat : new. Paperback. This book overcomes the separation existing in literature between the static and the dynamic bifurcation worlds. It brings together buckling and post-buckling problems with nonlinear dynamics, the bridge being represented by the perturbation method, i.e., a mathematical tool that allows for solving static and dynamic problems virtually in the same way. The book is organized as follows: Chapter one gives an overview; Chapter two illustrates phenomenological aspect of static and dynamic bifurcations; Chapter three deals with linear stability analysis of dynamical systems; Chapter four and five discuss the general theory and present examples of buckling and post-buckling of elastic structures; Chapter six describes a linearized approach to buckling, usually adopted in the technical literature, in which pre-critical deformations are neglected; Chapters seven to ten, analyze elastic and elasto-plastic buckling of planar systems of beams, thin-walled beams and plate assemblies, respectively; Chapters eleven to thirteen, illustrate dynamic instability phenomena, such as flutter induced by follower forces, aeroelastic bifurcations caused by wind flow, and parametric excitation triggered by pulsating loads. Finally, Chapter fourteen discusses a large gallery of solved problems, concerning topics covered in the book. An Appendix presents the Vlasov theory of open thin-walled beams. The book is devoted to advanced undergraduate and graduate students, as well as engineers and practitioners. The methods illustrated here are immediately applicable to model real problems.The BookIntroduces, in a simple way, complex concepts of bifurcation theory, by making use of elementary mathematicsGives a comprehensive overview of bifurcation of linear and nonlinear structures, in static and dynamic fieldsContains a chapter in which many problems are solved, either analytically or numerically, and results commented Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Etat : NEW.

Etat : Hervorragend. Zustand: Hervorragend | Seiten: 724 | Sprache: Englisch | Produktart: Bücher | This book overcomes the separation existing in literature between the static and the dynamic bifurcation worlds. It brings together buckling and post-buckling problems with nonlinear dynamics, the bridge being represented by the perturbation method, i.e., a mathematical tool that allows for solving static and dynamic problems virtually in the same way. The book is organized as follows: Chapter one gives an overview; Chapter two illustrates phenomenological aspect of static and dynamic bifurcations; Chapter three deals with linear stability analysis of dynamical systems; Chapter four and five discuss the general theory and present examples of buckling and post-buckling of elastic structures; Chapter six describes a linearized approach to buckling, usually adopted in the technical literature, in which pre-critical deformations are neglected; Chapters seven to ten, analyze elastic and elasto-plastic buckling of planar systems of beams, thin-walled beams and plate assemblies, respectively; Chapters eleven to thirteen, illustrate dynamic instability phenomena, such as flutter induced by follower forces, aeroelastic bifurcations caused by wind flow, and parametric excitation triggered by pulsating loads. Finally, Chapter fourteen discusses a large gallery of solved problems, concerning topics covered in the book. An Appendix presents the Vlasov theory of open thin-walled beams. The book is devoted to advanced undergraduate and graduate students, as well as engineers and practitioners. The methods illustrated here are immediately applicable to model real problems.The BookIntroduces, in a simple way, complex concepts of bifurcation theory, by making use of elementary mathematicsGives a comprehensive overview of bifurcation of linear and nonlinear structures, in static and dynamic fieldsContains a chapter in which many problems are solved, either analytically or numerically, and results commented.

Buch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - This book overcomes the separation existing in literature between the static and the dynamic bifurcation worlds. It brings together buckling and post-buckling problems with nonlinear dynamics, the bridge being represented by the perturbation method, i.e., a mathematical tool that allows for solving static and dynamic problems virtually in the same way.The book is organized as follows: Chapter one gives an overview; Chapter two illustrates phenomenological aspect of static and dynamic bifurcations; Chapter three deals with linear stability analysis of dynamical systems; Chapter four and five discuss the general theory and present examples of buckling and post-buckling of elastic structures; Chapter six describes a linearized approach to buckling, usually adopted in the technical literature, in which pre-critical deformations are neglected; Chapters seven to ten, analyze elastic and elasto-plastic buckling of planar systems of beams, thin-walled beams and plate assemblies, respectively; Chapters eleven to thirteen, illustrate dynamic instability phenomena, such as flutter induced by follower forces, aeroelastic bifurcations caused by wind flow, and parametric excitation triggered by pulsating loads. Finally, Chapter fourteen discusses a large gallery of solved problems, concerning topics covered in the book. An Appendix presents the Vlasov theory of open thin-walled beams. The book is devoted to advanced undergraduate and graduate students, as well as engineers and practitioners. The methods illustrated here are immediately applicable to model real problems.The BookIntroduces, in a simple way, complex concepts of bifurcation theory, by making use of elementary mathematicsGives a comprehensive overview of bifurcation of linear and nonlinear structures, in static and dynamic fieldsContains a chapter in which many problems are solved, either analytically or numerically, and results commented.

Hardcover. Etat : Brand New. 723 pages. 9.25x6.10x1.61 inches. In Stock.

Hardcover. Etat : new. Hardcover. Nonlinear models of elastic and visco-elastic onedimensional continuous structures (beams and cables) are formulated by the authors of this title. Several models of increasing complexity are presented: straight/curved, planar/non-planar, extensible/inextensible, shearable/unshearable, warpingunsensitive/ sensitive, prestressed/unprestressed beams, both in statics and dynamics. Typical engineering problems are solved via perturbation and/or numerical approaches, such as bifurcation and stability under potential and/or tangential loads, parametric excitation, nonlinear dynamics and aeroelasticity. Contents 1. A One-Dimensional Beam Metamodel.2. Straight Beams.3. Curved Beams.4. Internally Constrained Beams.5. Flexible Cables.6. Stiff Cables.7. Locally-Deformable Thin-Walled Beams.8. Distortion-Constrained Thin-Walled Beams. This book provides engineers with complete guidance to the modeling and applications of nonlinear beams and cables. It begins by formulating nonlinear models of elastic and visco-elastic one-dimensional continuous structures. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.