Langue: anglais
Edité par Society for the Advancement of Material and Process Engineering, 1993
ISBN 10 : 4990002830 ISBN 13 : 9784990002831
Vendeur : David's Books, Ypsilanti, MI, Etats-Unis
EUR 13,10
Quantité disponible : 1 disponible(s)
Ajouter au panierHardcover. Etat : Good. No marks, light cover wear.
Langue: anglais
Edité par Cambridge University Press, 2014
ISBN 10 : 1107408717 ISBN 13 : 9781107408715
Vendeur : California Books, Miami, FL, Etats-Unis
EUR 38,43
Quantité disponible : Plus de 20 disponibles
Ajouter au panierEtat : New.
Langue: anglais
Edité par Cambridge University Press, 2014
ISBN 10 : 1107408318 ISBN 13 : 9781107408319
Vendeur : California Books, Miami, FL, Etats-Unis
EUR 38,43
Quantité disponible : Plus de 20 disponibles
Ajouter au panierEtat : New.
Langue: anglais
Edité par Society for the Advancement of Material and Process Engineering, Japan, 1993
ISBN 10 : 4990002830 ISBN 13 : 9784990002831
Vendeur : PsychoBabel & Skoob Books, Didcot, Royaume-Uni
Edition originale
EUR 26,27
Quantité disponible : 1 disponible(s)
Ajouter au panierhardcover. Etat : Very Good. Etat de la jaquette : No Dust Jacket. First Edition. Small black mark at the bottom page corner. Used.
Langue: anglais
Edité par Elsevier, Amsterdam / Oxford / New York / Tokyo:, 1985
ISBN 10 : 0444424997 ISBN 13 : 9780444424990
Vendeur : About Books, Henderson, NV, Etats-Unis
Edition originale
EUR 40,13
Quantité disponible : 1 disponible(s)
Ajouter au panierHardcover. Etat : Original blue boards. Etat de la jaquette : No Dust Jacket. First Edition. Amsterdam / Oxford / New York / Tokyo:: Elsevier, 1985. Very Good condition. Clean, square, and tight. EX-LIBRARY copy, stamped "WITHDRAWN" on endpapers. No underlining. No margin notes. No highlighting. Illustrated throughout with diagrams, drawings, tables, and photographs. Bibliographical references. Index. Proceedings of the 6th International European Chapter Conference of the Society for the Advancement of Material and Process Engineering, Scheveningen, The Netherlands, May 28- 30, 1985. Volume 29 in the Materials Science Monographs series. First Edition. Hardcover. Original blue boards/No Dust Jacket. 8vo. x, 309pp.
Langue: anglais
Edité par Cambridge University Press, 2014
ISBN 10 : 1107408318 ISBN 13 : 9781107408319
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
EUR 35,36
Quantité disponible : Plus de 20 disponibles
Ajouter au panierEtat : New. In.
Langue: anglais
Edité par Cambridge University Press, 2014
ISBN 10 : 1107408717 ISBN 13 : 9781107408715
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
EUR 35,36
Quantité disponible : Plus de 20 disponibles
Ajouter au panierEtat : New. In.
Langue: anglais
Edité par Cambridge University Press 2014-06-05, 2014
ISBN 10 : 1107408318 ISBN 13 : 9781107408319
Vendeur : Chiron Media, Wallingford, Royaume-Uni
EUR 34,08
Quantité disponible : 10 disponible(s)
Ajouter au panierPaperback. Etat : New.
Langue: anglais
Edité par Cambridge University Press 2014-05, 2014
ISBN 10 : 1107408717 ISBN 13 : 9781107408715
Vendeur : Chiron Media, Wallingford, Royaume-Uni
EUR 34,18
Quantité disponible : 10 disponible(s)
Ajouter au panierPF. Etat : New.
Langue: anglais
Edité par Cambridge University Press CUP, 2014
ISBN 10 : 1107408318 ISBN 13 : 9781107408319
Vendeur : Books Puddle, New York, NY, Etats-Unis
EUR 53,49
Quantité disponible : 4 disponible(s)
Ajouter au panierEtat : New. pp. 204.
Langue: anglais
Edité par Cambridge University Press CUP, 2014
ISBN 10 : 1107408717 ISBN 13 : 9781107408715
Vendeur : Books Puddle, New York, NY, Etats-Unis
EUR 55,67
Quantité disponible : 4 disponible(s)
Ajouter au panierEtat : New. pp. 358.
Langue: anglais
Edité par Materials Research Society, 2011
ISBN 10 : 1605113123 ISBN 13 : 9781605113128
Vendeur : Books Puddle, New York, NY, Etats-Unis
EUR 62,12
Quantité disponible : 1 disponible(s)
Ajouter au panierEtat : New. pp. ix + 127.
Vendeur : Emile Kerssemakers ILAB, Heerlen, Pays-Bas
EUR 20
Quantité disponible : 1 disponible(s)
Ajouter au panier25 cm. original hardcover. x,310 pp. ills, diagrams, tables. references. index. "Materials science monographs, 29". -(libr label, library stamp, slightly rubbed, owner's name, otherwise (very) good). 777g.
Langue: anglais
Edité par Materials Research Society, 2011
ISBN 10 : 1605113123 ISBN 13 : 9781605113128
Vendeur : Majestic Books, Hounslow, Royaume-Uni
EUR 59,73
Quantité disponible : 1 disponible(s)
Ajouter au panierEtat : New. pp. ix + 127 Illus.
Langue: anglais
Edité par Materials Research Society, 2011
ISBN 10 : 1605113123 ISBN 13 : 9781605113128
Vendeur : Basi6 International, Irving, TX, Etats-Unis
EUR 68,26
Quantité disponible : 3 disponible(s)
Ajouter au panierEtat : Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.
Langue: anglais
Edité par Materials Research Society, 2011
ISBN 10 : 1605113123 ISBN 13 : 9781605113128
Vendeur : Romtrade Corp., STERLING HEIGHTS, MI, Etats-Unis
EUR 68,26
Quantité disponible : 1 disponible(s)
Ajouter au panierEtat : New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
Langue: anglais
Edité par Materials Research Society, 2011
ISBN 10 : 1605113123 ISBN 13 : 9781605113128
Vendeur : Biblios, Frankfurt am main, HESSE, Allemagne
EUR 61,74
Quantité disponible : 1 disponible(s)
Ajouter au panierEtat : New. pp. ix + 127.
Langue: anglais
Edité par Cambridge University Press, 2009
ISBN 10 : 1605111295 ISBN 13 : 9781605111292
Vendeur : Basi6 International, Irving, TX, Etats-Unis
EUR 83,75
Quantité disponible : 1 disponible(s)
Ajouter au panierEtat : Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.
Langue: anglais
Edité par Cambridge University Press, 2014
ISBN 10 : 1107408318 ISBN 13 : 9781107408319
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
EUR 52,93
Quantité disponible : 1 disponible(s)
Ajouter au panierTaschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - Enabled by the development and introduction of new materials, the semiconductor industry continues to follow Moore's law into 32nm and 22nm technologies. Advanced interconnect structures require the use of porous dielectrics with further reduced k-values and even weaker mechanical properties, as well as much thinner metallization liners. In addition, the increasing resistivity of Cu at decreasing dimensions must be addressed in order to maintain the performance of continuously shrinking devices. To deal with these issues, and to maintain the reliability of the interconnects, innovations in materials, processes and architectures are needed. This book brings together researchers from around the world to exchange the latest advances in materials, processes, integration and reliability in advanced interconnects and packaging, and to discuss interconnects for emerging technologies. Papers from a joint session with Symposium F, Packaging, Chip-Package Interactions and Solder Materials Challenges, are also included and focus on 3D chip stacking and molecular electronics.
Langue: anglais
Edité par Cambridge University Press, 2014
ISBN 10 : 1107408717 ISBN 13 : 9781107408715
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
EUR 55,77
Quantité disponible : 1 disponible(s)
Ajouter au panierTaschenbuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - In 2004, the microelectronics industry quietly ushered in the Nanoelectronics Era with the mass production of sub-100nm node devices. The current leading-edge semiconductor chips in mass production - the so-called 90nm node devices - have a transistor gate length of less than 50nm. This rapid technological advancement in the semiconductor industry has been made possible by innovations in materials employed in both transistor fabrication (front-end-of-the-line, FEOL) and interconnect fabrication (back-end-of-the-line, BEOL). The 90nm node BEOL features copper (Cu) interconnects and dielectric materials with a low-dielectric constant (k) of about 3.0. However, for the next generations of 65nm node and beyond, evolutionary and revolutionary innovations in BEOL materials and processes are needed to fuel the continued, healthy growth of the semiconductor. This book provides a forum to exchange advances in materials, processes, integration, and reliability in advanced interconnects and packaging. The book also addresses interconnects for emerging technologies, including 3D chip stacking and optical interconnects, as well as interconnects for optoelectronics, plastic electronics and molecular electronics.
Langue: anglais
Edité par Cambridge University Press, 2009
ISBN 10 : 1605111295 ISBN 13 : 9781605111292
Vendeur : California Books, Miami, FL, Etats-Unis
EUR 124,02
Quantité disponible : Plus de 20 disponibles
Ajouter au panierEtat : New.
Vendeur : Buchpark, Trebbin, Allemagne
EUR 27,51
Quantité disponible : 1 disponible(s)
Ajouter au panierEtat : Gut. Zustand: Gut | Seiten: 320 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Langue: anglais
Edité par Cambridge University Press, 2009
ISBN 10 : 1605111295 ISBN 13 : 9781605111292
Vendeur : Ria Christie Collections, Uxbridge, Royaume-Uni
EUR 120,97
Quantité disponible : Plus de 20 disponibles
Ajouter au panierEtat : New. In.
Langue: anglais
Edité par Materials Research Society, 2011
ISBN 10 : 1605113123 ISBN 13 : 9781605113128
Vendeur : Mispah books, Redhill, SURRE, Royaume-Uni
EUR 111,97
Quantité disponible : 1 disponible(s)
Ajouter au panierHardcover. Etat : Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
Langue: anglais
Edité par Materials Research Society, 2009
ISBN 10 : 1605111295 ISBN 13 : 9781605111292
Vendeur : Books Puddle, New York, NY, Etats-Unis
EUR 160,34
Quantité disponible : 4 disponible(s)
Ajouter au panierEtat : New. pp. viii + 189.
Langue: anglais
Edité par Cambridge University Press, 2009
ISBN 10 : 1605111295 ISBN 13 : 9781605111292
Vendeur : Mispah books, Redhill, SURRE, Royaume-Uni
EUR 139,08
Quantité disponible : 1 disponible(s)
Ajouter au panierHardcover. Etat : Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
Vendeur : Revaluation Books, Exeter, Royaume-Uni
EUR 161,75
Quantité disponible : 2 disponible(s)
Ajouter au panierHardcover. Etat : Brand New. 189 pages. 9.00x6.25x0.75 inches. In Stock.
Langue: anglais
Edité par Cambridge University Press, 2009
ISBN 10 : 1605111295 ISBN 13 : 9781605111292
Vendeur : AHA-BUCH GmbH, Einbeck, Allemagne
EUR 159,10
Quantité disponible : 1 disponible(s)
Ajouter au panierBuch. Etat : Neu. Druck auf Anfrage Neuware - Printed after ordering - Enabled by the development and introduction of new materials, the semiconductor industry continues to follow Moore's law into 32nm and 22nm technologies. Advanced interconnect structures require the use of porous dielectrics with further reduced k-values and even weaker mechanical properties, as well as much thinner metallization liners. In addition, the increasing resistivity of Cu at decreasing dimensions must be addressed in order to maintain the performance of continuously shrinking devices. To deal with these issues, and to maintain the reliability of the interconnects, innovations in materials, processes and architectures are needed. This book brings together researchers from around the world to exchange the latest advances in materials, processes, integration and reliability in advanced interconnects and packaging, and to discuss interconnects for emerging technologies. Papers from a joint session with Symposium F, Packaging, Chip-Package Interactions and Solder Materials Challenges, are also included and focus on 3D chip stacking and molecular electronics.
Langue: anglais
Edité par Cambridge University Press, Cambridge, 2014
ISBN 10 : 1107408717 ISBN 13 : 9781107408715
Vendeur : Grand Eagle Retail, Bensenville, IL, Etats-Unis
EUR 38,42
Quantité disponible : 1 disponible(s)
Ajouter au panierPaperback. Etat : new. Paperback. In 2004, the microelectronics industry quietly ushered in the Nanoelectronics Era with the mass production of sub-100nm node devices. The current leading-edge semiconductor chips in mass production - the so-called 90nm node devices - have a transistor gate length of less than 50nm. This rapid technological advancement in the semiconductor industry has been made possible by innovations in materials employed in both transistor fabrication (front-end-of-the-line, FEOL) and interconnect fabrication (back-end-of-the-line, BEOL). The 90nm node BEOL features copper (Cu) interconnects and dielectric materials with a low-dielectric constant (k) of about 3.0. However, for the next generations of 65nm node and beyond, evolutionary and revolutionary innovations in BEOL materials and processes are needed to fuel the continued, healthy growth of the semiconductor. This book provides a forum to exchange advances in materials, processes, integration, and reliability in advanced interconnects and packaging. The book also addresses interconnects for emerging technologies, including 3D chip stacking and optical interconnects, as well as interconnects for optoelectronics, plastic electronics and molecular electronics. This book provides a forum to exchange advances in materials, processes, integration, and reliability in advanced interconnects and packaging. The book also addresses interconnects for emerging technologies, including 3D chip stacking and optical interconnects, as well as interconnects for optoelectronics, plastic electronics and molecular electronics. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Langue: anglais
Edité par Cambridge University Press, Cambridge, 2014
ISBN 10 : 1107408318 ISBN 13 : 9781107408319
Vendeur : Grand Eagle Retail, Bensenville, IL, Etats-Unis
EUR 38,42
Quantité disponible : 1 disponible(s)
Ajouter au panierPaperback. Etat : new. Paperback. Enabled by the development and introduction of new materials, the semiconductor industry continues to follow Moore's law into 32nm and 22nm technologies. Advanced interconnect structures require the use of porous dielectrics with further reduced k-values and even weaker mechanical properties, as well as much thinner metallization liners. In addition, the increasing resistivity of Cu at decreasing dimensions must be addressed in order to maintain the performance of continuously shrinking devices. To deal with these issues, and to maintain the reliability of the interconnects, innovations in materials, processes and architectures are needed. This book brings together researchers from around the world to exchange the latest advances in materials, processes, integration and reliability in advanced interconnects and packaging, and to discuss interconnects for emerging technologies. Papers from a joint session with Symposium F, Packaging, Chip-Package Interactions and Solder Materials Challenges, are also included and focus on 3D chip stacking and molecular electronics. The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.